324ade5 TLS: Make tls_cert_chain_failure_event() more robust
c6231b5 TLS: Remove storing of never-read value
15a6813 Remove unnecessary cleanup assignment in SHA1Final()
ef3866a nl80211: Don't call linux_iface_up() for a dedicated P2P Device
c2ed779 mesh: Document Mesh Peering Management element structure in more detail
b2817cd mesh: Check PMKID in AMPE Action frames
6c33eed mesh: Fix PMKID to match the standard
ede7770 wpa_supplicant: Do not wait for monitor on P2P Device interface
1c94570 Do not wait for monitor to attach if no control interface
f98674a Clone default LIBS value to LIBS_* for other tools
7d2f674 Add "GET_CAPABILITY acs" to allow ACS build option to be detected
d990971 wpa_supplicant: Enable Automatic Channel Selection support for AP mode
96bc508 Handle survey event properly in wpa_supplicant
d39f796 EAP-TNC peer: Remove dead code related to fragmentation
662512e P2PS: Remove dead code
abbbaa4 TNC: Print received IF-TNCCS message as debug ASCII hexdump
d745f02 EAP-TNC peer: Allow fragment_size to be configured
a67e7e5 RADIUS: Add EACCES to list of recognized send() errno values
5bd9be4 Fix RADIUS Called-Station-Id to not escape SSID
0764dd6 TLS client: Multi-OCSP check to cover intermediate CAs
d6b536f Add ocsp=3 configuration parameter for multi-OCSP
0268383 TLS: Move variable declaration to the beginning of the block
b567775 TLS client: OCSP stapling with ocsp_multi option (RFC 6961)
8ea6a27 TLS server: OCSP stapling with ocsp_multi option (RFC 6961)
5addb0d Server configuration for OCSP stapling with ocsp_multi (RFC 6961)
bca0872 TLS server: OCSP stapling
9532bd2 GnuTLS: OCSP stapling on the server side
6241766 Use wpa_msg() for the "RSN: PMKID mismatch" message
e161451 EAP-EKE: Merge identical error return paths
13cb0a6 EAP-EKE: Reject too long Prot() data when building a frame
0ab0de8 Document previously missing key_mgmt values
Change-Id: I9ac7d0da03d8baf4542e276ab20cb56e44bfa33c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
f10ff62 Describe preferred mechanism for submitting contributions
fcdb359 Use "STATUS-NO_EVENTS" instead of "STATUS" in get_wpa_status function
73ed03f wpa_supplicant: Add GTK RSC relaxation workaround
ea6030c Restore previous wpa_state in scan-only result handler
1e74ae4 WNM: Clear BSS TM data if already associated with preferred candidate
d129b02 EAP-pwd: Add support for Brainpool Elliptic Curves
a34eace dbus: Remove unused dict helper functions
cdcb2d0 wpa_cli: Add support for vendor_elem_* commands
17b7032 EAP peer: Clear ignore flag in INITIALIZE state
1f1e619 Add test programs for checking libwpa_client linking
736b7cb wpa_supplicant/Makefile: Fix libwpa_client build
2e38079 TLS: Fix memory leak with multiple TLS server instances
7b0f550 eap_sim_db: Implement eap_sim_db_expire_pending()
45c3e72 Add frequency to operating class determination for 5 GHz 100..140
e50c50d dbus: Expose interface globals via D-Bus properties
1aa0fb7 dbus: Pass property description to getters/setters
c93b7e1 RSN: Check result of EAPOL-Key frame send request
95be79f Allow -1 as value to disable frag_threshold
bc50bb0 Extend the range of values for the RTS threshold
053693d hostapd: Add feature to start all interfaces at the same time in sync
9578413 Reserve QCA vendor specific nl80211 commands 110..114
5d4c508 Assign QCA commands and attributes for Tx power scaling and OTA testing
5d1d69a P2P: Filter control chars in group client device name similarly to peer
f67d1a0 TDLS: Do not send error case of TPK M3 if TX fails
1248e58 wpa_supplicant: Reopen debug log file upon receipt of SIGHUP signal
d8fd633 Do not write ERROR level log entries if debug file is not used
67deaa5 l2_packet: Add build option to disable Linux packet socket workaround
fa46426 RSN: Do not try to connect if PMF disabled and AP requires it
8acbe7f WNM: Verify WNM Sleep Mode element length
dacd789 WNM: Mark set TFS buffer const
...
f24b979 OpenSSL: Merge error returns
84d6a17 TLS: Remove unused tls_capabilities()
7867227 ms_funcs: Merge similar return cases
3596361 hw_features: Merge similar return case in check_40mhz_2g4()
aac1efe Reject the initial 4-way handshake if initial GTK setup fails
2da5256 Add backtrace-based error path testing mechanism
55413ce P2P: Do not allow 40 MHz co-ex PRI/SEC switch to force MCC
Next patches were skipped due to explicit cherry-pick:
bddc51e RSN: Stop connection attempt on apparent PMK mismatch
3fdaaa8 Throttle control interface event message bursts
a530fe7 Add wpa_supplicant EVENT_TEST control interface command
ee1e3f5 hostapd: Global control interface notifications
2e95cfc Add debug prints for wpa_supplicant ctrl_iface socket send operations
ce7d0eb Update AP WPA/RSN IE on all associations if driver can select BSS
844dfeb QCA vendor command support to set band to driver
Change-Id: I909996c5afcd3b5d123ea1e23c0e1212021f7625
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Some operations like a new scan result processing can result in large
number of wpa_supplicant control interface messages being generated.
Especially with multiple control interface monitors, this could result
in hitting the output queue length maximum and event messages getting
dropped. In worst case, that could even result in hitting ten
consecutive sendto() errors which could result in an attached monitor
socket getting detached.
Avoid this type of issues by throttling monitor event transmission based
on the output queue length. If more than half of the maximum send buffer
is used, postpone sending of following event messages until the pending
output queue has dropped below the limit.
Bug: 24270573
Change-Id: I3905f3ec925ee3bdc67f7fb93991e620a2a6ee57
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
This commit implements hostapd global control interface notifications
infrastructure. hostapd global control interface clients issue
ATTACH/DETACH commands to register and deregister with hostapd
correspondingly - the same way as for any other hostapd/wpa_supplicant
control interface.
Bug: 24270573
Change-Id: I46da39e8262a446e7779a1adfbcb08b5bfa382d7
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
This makes it easier to track the output queue state on a control
interface socket and determine what could be causing issues with running
out of space in the buffer.
Bug: 24270573
Change-Id: Iad7b6b7c96dca45edd6734594a11c97376942bd9
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
f43c1ae P2P: Handle P2P Device dedicated interface parent removal
1ac977b nl8021: Allow sending wowlan configuration on any interface
4899702 nl80211: Remove android_genl_ctrl_resolve()
38dcc86 P2P: Consider ht/vht on P2P_GROUP_ADD command (with no params)
29292d5 ctrl_iface: Make p2p_ctrl_group_add() more robust
e4a80d8 P2P: Fix secondary channel selection for HT40
4e71758 dbus: Add RemoveClient method to remove a client from local GO
f0a79c9 D-Bus: Fix wpas_dbus_register_peer() documentation
95d62a6 D-Bus: Add missing params in WPS function documentation
790429b D-Bus: Fix function documentation for wpas_dbus_signal_p2p_go_neg_resp()
92fe746 D-Bus: Add function documentation for wpas_dbus_signal_p2p_go_neg_req()
e1dffa3 P2P: Fix PBC overlap detection
de7b02f P2P: Use the P2P Device interface in wpas_p2p_fallback_to_go_neg()
6b5147a P2P: Fix memory leak in p2p_process_nfc_connection_handover()
33ba27d EAP-FAST peer: Stop immediately on key derivation failure
144b6a0 OpenSSL: Fix memory leak on an openssl_tls_prf() error path
50a9efe P2PS: Fix Probe Response frame building in error cases
509f269 P2PS: Fix org.wi-fi.wfds matching when building the response
5fa5f84 P2PS: Add more debug prints for service info building
fdde3db P2PS: Remove unnecessary service hash filtering from p2p_reply_probe()
f2e0eec P2PS: Do not ignore other hashes if org.wi-fi.wfds hash is included
ebdc32f P2PS: Fix service hash matching for org.wi-fi.wfds
24533f7 P2PS: Fix p2p_find handling to allow "wildcard" with other hash values
f33a31b P2PS: Verify service name length in P2P_FIND command
129b621 P2PS: Fix P2P_FIND seek parameter parsing
83e520e P2PS: Add a wildcard with other advertised service info
c5d3cad P2PS: Re-factor p2p_buf_add_service_instance function
13f6f61 wpa_cli: Fix process termination in wpa_cli action mode case
b4c0f58 Clear allocated debug message buffers explicitly
14fd033 Clear control interface command explicitly from stack
d95c599 P2P: Fix group interface addition failure properly for concurrent case
e12c400 P2PS: Refactor p2p_data::query_hash and p2p_data::query_count use
4839da4 P2P: Add vendor elements into Invitation Response frames
886f583 P2PS: Delete p2ps_svc_found from struct p2p_data
3f048aa P2PS: Add a function to free a PD context
8f52409 P2P: Prefer direct Probe Response frames over GO's client list
4e8817f P2P: Use more precise device timestamping for group clients
0799b3f P2P: Specify frequency when sending Probe Response frame
5d180a7 drivers: Add freq parameter to send_mlme() function
5143e7e P2P: Fix return value of p2p_reply_probe() and p2p_probe_req_rx()
07c1e98 P2PS: Enable Probe Request frame processing by P2P Client
734ddf6 P2P: Add rx_freq parameter to Probe Request frame handler
e6012e8 P2P: Update target GO Device Address from BSS entry during join
a9a4841 Remove duplicated country code from operating class lists
132dfbe Fix removal of tagged interface and bridge when multiple BSS share them
e11776a Combine multiple function calls to a single statement
b649c0a dbus: Add Reconnect command to D-Bus Interface
f4a234a doc: Update D-Bus GONegotiationRequest Signal: add device_go_intent
0c9fb14 P2P: Add Operating class 125 for P2P supported channels
Change-Id: I782c1403985248ff994f484282efa6519fd369e9
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
57e832d GAS: Remove all radio works before calling gas_query_deinit()
661888b P2P: Fix persistent group profile on manual disabled=2 change
1a2f7ca D-Bus: Add WPS pbc-overlap Event
4f36965 P2P: Add ModelNumber and SerialNumber info into D-Bus peer interface
2899cba P2P: Add ModelName info into D-Bus peer interface
8bb5cfe doc: Add missing ListenChannel to P2P information
995a3a0 Document the wpa_msg_cb "global" parameter
e66bced Do not set own_disconnect_req flag if not connected
8d2ed87 wpa_gui: Port to Qt5
e1ede80 eapol_test: Support IPv6 for authentication server
e19c1d2 Fix pairwise cipher suite bitfields to the driver in mixed mode
ee120ff Remove [MU-BEAMFORMEE] option from hostapd vht_capab parameter
c5ee4dd Fix spelling of initialize in a comment and an error message
aa2b125 P2P: Add GO Intent of connecting device in GO Negotiation Request event
cf60962 doc: Fix a typo in D-Bus API document
f13e815 Set Acct-Session-Id from os_get_random() instead of os_get_time()
92f190a OpenSSL: Fix build iwth OpenSSL 0.9.8
a80651d Add support to request a scan with specific SSIDs
94687a0 WPS: Allow the priority for the WPS networks to be configured
09d57ce wpa_supplicant: Remove trailing whitespace
0980c7f hostapd: Make sure band selection does not result in NULL dereference
Change-Id: I32154fcf606169fc1e3e3a653e80c99f058f8e95
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
fb09ed3 Interworking: Notify the ANQP parsing status
d10b01d HS20: Provide appropriate permission to the OSU related files
73f1ee0 HS20: Fix TrustRoot path for PolicyUpdate node in PPS MO
54a0ac0 HS20: Return result of cmd_sub_rem in hs20-osu-client
b62b0cb WNM: Fix possible memory leak by free buf
9bd0273 EAP: Fix possible memory leak in eap_ttls_process_decrypted()
b760e64 eap_server: Avoid NULL pointer dereference in eap_fast_encrypt_phase2()
948d3a8 hostapd: Remove unused variable from hostapd_get_hw_features
dd09e42 Fix memory leak in wpa_supplicant global bgscan configuration
30f459c wpa_cli: Fix NULL dereference on printf string argument
414f23d Avoid NULL string in printf on EAP method names in authenticator
b72b2ad P2P: Stop p2p_listen/find on wpas_p2p_invite
7b7b444 nl80211: Fix reading of the extended capabilities mask
7e608d1 P2P: Use the correct wpa_s interface to handle P2P state flush
fd83335 AP: Enable HT Tx STBC for AP/GO if supported by driver
d90bfa9 Move external_scan_running to wpa_radio
0c5f01f Clear reattach flag in fast associate flow
8ad8bc5 NFC: Redirect NFC commands on global control interface
57ae1f5 P2P: Fix P2P invitation with NFC
07565ab WNM: Fix the length of WNM_BSS_QUERY control interface command
2d9c99e Retry scan-for-connect if driver trigger fails
911942e Add a test framework for various wpa_supplicant failure cases
6b46bfa WPS: Re-fix an interoperability issue with mixed mode and AP Settings
1648cc6 ACS: Allow subset of channels to be configured
95ff306 nl80211: Allow HT/VHT to be disabled for IBSS
7451a21 mesh: Return negative value on join failed
5a2a6de mesh: Make inactivity timer configurable
b9749ba AP: Expire STA without entry in kernel
a114c72 AP: Remove redundant condition for STA expiration
0d787f0 Fix RADIUS client with out-of-memory and missing shared secret
0efcad2 Print in debug log whether attached monitor is for global interface
8266e6c HS 2.0: Try to use same BSS entry for storing GAS results
6c69991 Make wpa_supplicant FLUSH command more likely to clear all BSS entries
2dbe63a Write reason for scan only_new_results into debug log
242b83a eapol_test: Fix cert_cb() function arguments
a8826b1 Interworking: Avoid busy loop in scan result mismatch corner cases
edd5939 Interworking: Start ANQP fetch from eloop callback
cbc210d RADIUS DAS: Allow PMKSA cache entry to be removed without association
4e871ed RADIUS DAS: Support Acct-Multi-Session-Id as a session identifier
b52c0d4 Add authMultiSessionId into hostapd STA info
861beb7 RADIUS DAS: Check for single session match for Disconnect-Request
783b2a9 Interworking: Fix INTERWORKING_CONNECT with zero-length SSID BSS entry
1fef85c nl80211: Fix AP-scan-in-STA-mode error path behavior
cebee30 Add domain_match network profile parameter
d07d3fb Add peer certificate alt subject name information to EAP events
98a4cd4 D-Bus: Clear cached EAP data on network profile changes
483dd6a Include peer certificate always in EAP events
dd5f902 Get rid of a compiler warning
d29fa3a Extend VENDOR_ELEM parameters to cover non-P2P Association Request
e7d0e97 hostapd: Add vendor specific VHT extension for the 2.4 GHz band
Change-Id: I45436c49986cd6bddbd869db3f474871a29ce1dc
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
8b48e32 wpa_cli: Add MAC address randomization in scan
fb37588 ctrl_iface: Add MAC address randomization in scan processing
56c76fa scan: Add MAC address randomization in scan handling
86056fe nl80211: Handle MAC address randomization in scan/sched_scan
ff23ed2 driver: Add definitions for MAC address randomization in scan
7db53bb wpa_cli: Implement TDLS start/cancel channel switching commands
72b2605 nl80211: Pass TDLS channel-switch start/stop params to kernel
6b90dea TDLS: Propagate enable/disable channel-switch commands to driver
d9d3b78 TDLS: Track TDLS channel switch prohibition in BSS
4daa572 TDLS: Add channel-switch capability flag
ca16586 Sync with wireless-testing.git include/uapi/linux/nl80211.h
8c42b36 WMM AC: Reconfigure tspecs on reassociation to the same BSS
677e7a9 WMM AC: Do not fail on unknown IEs in Association Response
fecc2bb WMM AC: Delete tspecs on roaming
20fe745 WMM AC: Print user-priority in wmm_ac_status
730a0d1 nl80211: Always register management frames handler
...
209702d Add possibility to set the setband parameter
ee82e33 Do not trigger the scan during initialization on Android platforms
e69ae5f Reject new SCAN commands if there is a pending request
...
59d7148 nl80211: Provide subtype and reason code for AP SME drivers
9d4ff04 Add external EAPOL transmission option for testing purposes
61fc904 P2P: Handle improper WPS termination on GO during group formation
58b40fd P2P: Clear p2p_go_group_formation_completed on GO start
c155305 Complete sme-connect radio work when clearing connection state
debb2da P2P: Report group removal reason PSK_FAILURE in timeout case
51465a0 The master branch is now used for v2.4 development
Change-Id: I9b9cfa5c5cd4d26b2f3f5595f7c226ac60de6258
7efc7f6 TDLS: Fix TPK M1 error case (CID 68214)
d1bb7ae nl80211: Fix non-hostapd interface addition to not call add_ifidx()
38ddcca TDLS: Add ctrl_iface option for flushing all TDLS peers
342bce6 TDLS: Bail on STA add failure in tpk_m1 processing
947f900 TDLS: Handle unreachable link teardown for external setup
cf1600a hostapd: Configure driver ACL even if MAC address list is empty
fa21e6c Fix CONFIG_MODULE_TESTS=y build without CONFIG_P2P=y
bd10d93 P2P: Clean up by moving ifdef CONFIG_P2P to p2p_suppplicant.h
e3bd6e9 P2P: Use another interface operating channel as listen channel
28812a8 P2P: Try using one of the social channels for GO
751b00b P2P: Modify p2p_get_pref_freq
0a816e8 P2P: Remove duplicated code from get_shared_radio_freqs_data()
504df28 Remove unused dump_freq_array()
a0c90bb P2P: Collect and use extended data on used frequencies
b278f32 P2P: Remove unused code from get_shared_radio_freqs_data()
e627012 Clean up EAPOL-Key Key Data processing
d56d7e5 Clean up EAPOL-Key processing
8605eab EAP-EKE: Fix typos in debug message
25be28a dbus: Check return value more consistently (CID 62841)
ac79fcf wext: Verify set_ssid results consistently (CID 62842)
f62415d Note chmod() failure in debug log even in ignore case (CID 62843)
305000e WPS: Check wps_build_wfa_ext() return value consistently (CID 68104)
2485835 EAP-MSCHAPv2: Check hash function results more consistently (CID 68105)
b7c61c9 Fix validation of EAPOL-Key length with AES key wrap (CID 62859)
Change-Id: I4da11c59a54467301c38c3bec52629b9db19647d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
5f7e1c0 Redirect more frames with ext_mgmt_frame_handling=1
7738163 RADIUS server: Copy IPv4 address only when IPv6 is not used
508e24c dbus: Clean up error reporting for TDLS peer address parsing
3b6170b WPS: Remove duplicate variable setting
78789d9 Remove unnecessary variable initialization
a7c37d9 dbus: Remove duplicated variable assignment
e997bc7 Remove a static analyzer warning about unused variable write
ea3b8c1 Do not use a separate variable for tracking first entry in a list
8a4ce28 WPA: Clean up cipher suite counting in write routines
6ed626d Remove unused gid_str pointer update
749fa14 Debug print trailing WPA/RSN IE bytes, if any
a5802c0 OpenSSL: Avoid never-used analyzer warning
7b6e815 Clean up hostapd add_iface error path operations
67adcd2 WNM: Check wpa_s->current_bss more consistently
3ff8073 EAP-FAST: Use clear eap_get_config() result validation
a8716d1 roboswitch: Verify that register read succeeds before comparing res
3d91a04 DFS: Make sure center frequency is always initialized for VHT
fa0a9f5 trace: Fix memory use on no-function name path
bd27b13 Make code path easier for static analyzers
64abb72 nl80211: Allow old r-o-c offchannel TX to be tested
fa72a88 P2P: Fix validation on Invitation Request error path
ca412c7 Remove unreachable return statement
2af4d87 GAS: Fix additional comeback delay with status code 95
07d462c Interworking: Remove unused password setting for SIM credential
3141b82 Add OSEN to proto config field writer
b908c50 Clear hostapd bss entry to NULL on add-interface-failure
0052ce4 atheros: Add support for OSEN
Change-Id: Ifd78a8f8259e5b0f654d3dbadd24c9ab029d3afb
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
8615bdf Increase global ctrl_iface buffer to same size as per-interface
c5a64e2 GAS client: Use Protected Dual of Public Action frames with PMF
5ce00d0 GAS server: Add support for Protected Dual of Public Action frames
e24fe94 Add definitions for Protected Dual of Public Action frames
7b2c42f hostapd: Fix PMF robust Action frame processing rules
ea6e040 Clear more configuration parameters to default on FLUSH
cf70d29 wpa_supplicant: Schedule PNO on completion of ongoing sched_scan
080cc44 nl80211: Fix sizeof check in vendor command/event handling
a487b35 hostapd: Fix segmentation fault when calling hostapd_cli all_sta
a6cff8b wpa_supplicant: Fix seg fault in wpas_ctrl_radio_work_flush() in error case
f62a3c2 P2P: Clone dtim_period to a new interface
88a0bca Update copyright years in the manpages
32185f5 Sync manpages and command-line options
b948e78 Add manpage for eapol_test
36bd29e wpa_supplicant: Fix usage text based on build options
dcdd383 P2P: Reduce peer expiration age to 60 sec and allow customization
dd27185 Skip normal scan when PNO is already in progress
a2d6365 P2P: Extend the listen time based on the active concurrent session
Change-Id: Iad81dc478319e59d8cfb673e2988d8bd3099b313
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
95fb2db P2P: Reject group formation on WPS provisioning failure
6fc61e1 Fix TX status processing during AP mode shutdown in wpa_supplicant
90a545c nl80211: Clean up netlink parsing and debug prints
b6a9590 Interworking: Keep up to two pending GAS_REQUEST responses
090b8e3 Update copyright notices for the new year 2014
991aa9c nl80211: Move CS supported flag to wpa_driver_capa
f0cbb98 Add DRIVER-STATUS command for hostapd
188ebcd EAP-IKEv2 peer: Fix a memory leak in notify round
a190189 Remove PEAPv2 support
16a19dd EAP-pwd peer: Allow fragmentation limit to be configured
60bf585 EAP-IKEv2 peer: Allow fragmentation limit to be configured
ea6fc58 WPS: Convert printf() debug print to use wpa_printf()
c4b8c71 EAP-GPSK: Report CSuite negotiation failure properly
5a0f596 EAP-GPSK: Allow forced algorithm selection to be configured
5f01c3c EAP peer: Improve failure reporting from METHOD with no eapRespData
7271ee8 Fix EAP-GPSK server compilation for SHA256 cipher suite
356d148 Interworking: Add optional freq argument to INTERWORKING_SELECT
a09ffd5 Fix req_scan-deplete-timeout and update eloop API for this
083916c P2P: Clear p2p_disabled and p2p_per_sta_psk on FLUSH command
3f45fc4 P2P: Clear services on FLUSH command
1f965e6 Allow external programs to request wpa_radio work items
6428d0a Do not start wpa_radio work during externally triggered scan
6470f47 Remove unneeded scan delay on connection-in-progress
4bb2321 Remove unneeded GAS query delay on connection-in-progress
6ac4b15 Use wpa_radio work for connection
b9e6d70 Use radio work for GAS requests
e05e130 P2P: Use radio work to protect offchannel Action frame exchanges
e1d1c8e Use radio work for P2P Listen requests
1b5d471 Use radio work for P2P scan requests
d12a51b Use radio work for scan requests
b1ae396 Add framework for exclusive radio operations
dd43aaa Add helper functions for cloning and freeing scan parameters
06f9acc Ignore externally triggered scan results with scan_res_handler
c9b5559 Clean up ctrl_iface debug prints for monitor events
d31b5ac Use cleaner debug print for ctrl_iface commands with private info
9595151 Remove duplicated RX ctrl_iface hexdump
9b85079 Fix scan-cache-clearing operation to avoid unnecessary cases
2f30cac Avoid unnecessary key clearing operations
466bcf9 Remove some unnecessary EAPOL port (un)authorized callbacks
949938a Ask driver to report only new scan results if requested
a1a31b6 Remove hostapd dump_file functionality
ea23df6 Make EAPOL dump data available through ctrl_iface STA command
96ea74b Convert EAPOL authenticator dump into easier to parse format
ca3b71c Remove hostapd dump_file data that is available through ctrl_iface
4c03a2b Make RADIUS server MIB available through control interface
f538be3 Add more STA information into the ctrl_iface STA command
101bdc2 Remove forgotten notes about already removed driver wrappers
7006753 Update EAP-FAST note regarding OpenSSL support
17b79e6 nl80211: Initial support for vendor commands and events
5890fa8 WPS: Fix clear-from-timeout handling to avoid race condition
c64e3a0 P2P: Send received Presence Response information to ctrl_iface monitors
f7fb676 ACS: Mark acs_fail() static
3cf06c9 OpenSSL: Include sha1/sha256 header files to verify declarations
5ace51a WNM: Clean up le16 variable use to avoid sparse warnings
c583868 Mark wpas_wps_er_nfc_handover_sel() static
8cf1e68 Move declaration of hostapd_acs_completed() into correct header file
0187c41 Declare wpa_debug_* variables in src/utils/wpa_debug.h
fcc6123 Declare wpa_drivers in src/drivers/driver.h
0d79b50 Clear EAPOL Logoff state on FLUSH command
327b01d nl80211: Add driver param for forcing monitor and connect APIs
6f06766 nl80211: Fix nl_mgmt handling in partial error case
4ea6a47 nl80211: Prefer newer scan result over older during duplicate removal
2eef517 nl80211: Report set_supp_port failures in debug log
a0bdd19 nl80211: Share a helper function for connect and associate commands
e00d546 Remove unnecessary build #ifdef from definitions
4848a38 Get rid of duplicated cipher suite and AKM definitions
de4ed4a nl80211: Use helper functions for cipher suite mapping
a565084 nl80211: Set control port for NL80211_CMD_COMMAND
ef93abd WPS: Clean up UUID debug print
35f3d3e nl80211: Clean up regulatory rule debug prints
880de88 nl80211: Print frame registration match on same debug line
03ed332 Interworking: Allow cred blocks not to be saved to a file
04f7ecc Reset WPA parameters to default values on FLUSH command
152cff6 P2P: Remove WPA_DRIVER_FLAGS_P2P_MGMT option
538d6f4 WPS: Use shorter scan interval during pre-provisioning search
3187fd9 WPS: Replace wpas_wps_in_progress with identical wpas_wps_searching
4414d9e SAE: Fix ECC element y coordinate validation step
069fb47 EAP-EKE: Allow forced algorithm selection to be configured
3a88914 Remove unused information element parsing data
dbfb8e8 Remove unnecessary EVENT_RX_ACTION
1450e1e Define __maybe_unused
912b34f Do not process Action frames twice in hostapd SME/MLME
006309b Fix whitespace style
6780713 WPS: Remove unused send_wpabuf()
e912986 tests: Verify concurrent WPS protocol run with assigned PIN
8aaafce Make local UUID available through ctrl_iface STATUS command
0e22b8d WPS: Make sure reconfiguration timeout is not left behind on deinit
75d1d0f WPS: Allow testing mode to disable 2.0 functionality
f7e2542 Remove unused wps_device_data_dup()
c89d9db Remove unnecessary extra tracking of eloop registration
c86bf16 Replace unnecessary hex_value() with hex2byte()
7b02375 Clear wps_fragment_size on FLUSH command
aa189ac Enable FT with SAE
2d2ecf5 nl80211: Fix protected Action frame reporting for AP mode
db76aa6 Fix PeerKey 4-way handshake
7732729 Fix PeerKey deinit behavior
8d321a7 WNM: Move disassociation imminent sending to wnm_ap.c
b76f4c2 hostapd: Make STA flags available through ctrl_iface STA command
aa03dbd Remove IEEE80211_REQUIRE_AUTH_ACK
121f2ab Remove unused STA flags
3578e66 WNM: Add STA flag to indicate the current WNM-Sleep-Mode state
4776897 WNM: Fix AP processing without wnm_oper driver callback
2025cad WNM: Move ESS Disassoc Imminent sending to a helper function
28ab64a WNM: Minimal processing of BSS Transition Management Query/Response
2cd0f6a WNM: Add Target BSSID into BSS Transition Management Response
a8a6a35 WNM: Use nonzero dialog token in BSS Transition Management Query
629edfe WNM: Fix Sleep Mode AP processing in open network
3c1060f WNM: Add debug logs to get the RSSI from the scan results
dff1e28 Initial handling of GTK-not-used cipher suite
51e3eaf OpenSSL: Do not accept SSL Client certificate for server
6bf61fb OpenSSL: Use certificates from TLS authentication in OCSP stapling
c962947 WPS ER: Fix deinit timeout handling with delayed/failing unsubscribe
7b75c30 WPS: Reschedule AP configuration reload on EAP completion
c511b32 WPS: Remove old duplicate network even if key is different
9d2cb3e Make CONFIG_TESTING_OPTIONS=y enable all testing options
662b40b WPS: Reduce scan wait time during WPS processing
015af91 Do not use results from externally requested scan for network selection
1cd93ff Reschedule own scan request if an externally started one is in progress
dc3906c Show timing information about scan requests in debug log
d81c73b Optional scan id for ctrl_iface SCAN requests
a5f40ef Track whether scan was started by us or an external program
18ae237 Fix comment format
88c2d48 Allow passive scan to be requested with SCAN passive=1
3ae3ec2 nl80211: Add scanned frequencies/SSIDs into debug log
69278f7 Remove unused last_scan_full
1f5d2dd Interworking: Allow EAP-FAST to be used
6ffa168 Add GAS-QUERY-START and GAS-QUERY-DONE event messages
93827f4 hostapd: Allow external management frame processing or testing
fee5234 Allow channel list to be specified for SCAN command
98eda9c Move int_array helpfer functions to utils/common.c
a4cfb48 Add make lcov-html to generate code coverage report
bee25cc nl80211: Fetch cipher capabilities from the driver
4daa011 Clean up cipher capability prints
35c2006 Convert wpa_hexdump functions to use void pointer instead of u8 *
5f9c134 Remove obsolete license notifications
bd1e328 Android: Remove old WEXT extensions
bad5cdf Verify that beacon setup succeeds before proceeding
7d7f7be Verify group key configuration for WPA group
30675c3 Add definitions for new cipher suites from IEEE Std 802.11ac-2013
13b24a7 VHT: Use status code 104 to indicate VHT required
ab41595 wpa_supplicant: Fix crash when terminating all interfaces
76aab03 Add secondary channel IE for CSA
8f4713c Store entire CS freq_params and not only freq
13daed5 Include driver.h in hostapd.h
a12d345 wpa_supplicant: Use monotonic time for last_scan check
51bffab WPS: Use monotonic time for AP connection attempt
6473e5c wpa_supplicant: Use relative time for TKIP Michael MIC failures
4e1eae1 wpa_supplicant: Use monotonic time for temp-disabled networks
151ab80 P2P: Use monotonic time for GO client waiting
3326f19 IBSS RSN: Use monotonic time for reinit detection
196a217 WPS_UPNP: Use monotonic time for event debouncing
864c9af wps_registrar: Use monotonic time for PBC workaround
61e98e9 wps_registrar: Use monotonic time for PBC session timeout
3647e5a wps_registrar: Use monotonic time for PIN timeout
3618618 rsn_supp: Use monotonic time for PMKSA cache expiry
c2be937 wpa_supplicant: Use monotonic time for EAPOL RX workaround
e72a001 bgscan: Use monotonic time
e05f060 rsn_supp: Do not track expiration time
5870717 RADIUS server: Use monotonic time
4012804 RADIUS client: Use monotonic time
acb69ce wpa_supplicant: Use monotonic time for RX/BSS times
46b8d4c wpa_supplicant: Use monotonic time for SA query timeout
f073fde EAP server: Remove SIM-DB pending timestamp
636e19a wpa_ctrl: Use monotonic time for request retry loop
7ffe7d2 AP: Use monotonic time for MMIC failure/TKIP countermeasures
dd4e32b AP: Use monotonic time for PMKSA cache
0fc545a AP: Use monotonic time for STA accounting
3e06180 bgscan_learn: Start scanning from the first freq
f4c73ae bgscan_learn: Fix initial interval
7dab119 bgscan_learn: Avoid redundant frequencies
3727123 bgscan: Stop bgscan only on disassociation
b2838ba Update IBSS documentation to include RSN option
429dd9a Advertise QoS Map support based on driver capability
049105b nl80211: Add support for QoS Map configuration
74ddd64 nl80211: Sync with mac80211-next.git
9fcd300 nl80211: Sync with wireless-testing.git
Change-Id: Iabdd88d9cabd478a41c3cb0a8d061b425cc1beca
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
32b6270 Android: Fix ARRAY_SIZE() compilation
7617388 Interworking: Report STATUS:sp_type even if domain is not configured
c20bc9d P2P: Remove compiler warning without CONFIG_IEEE80211N
ca9bc5b P2P: Add VHT support
20ea1ca P2P: Add VHT parameter to P2P operations
53cfad4 nl80211: Mark VHT 80 MHz channels
f2112b2 wpa_supplicant: Add CONFIG_IEEE80211AC
6b02335 hostapd: Mask out not-supported VHT capabilities
7f0303d hostapd: Verify VHT 160/80+80 MHz driver support
c781eb8 hostapd: Verify VHT capabilities are supported by driver
b29b012 Fix some VHT Capabilities definitions
7066a8e hostapd: Fix wrong VHT configuration capabilities flags
6651f1f nl80211: Use max tx power from regulatory domain
7ac3616 nl80211: Replace perror() and printf() calls with wpa_printf()
4d9fb08 WPS: Clear known_wps_freq in addition to after_wps
d20c340 Interworking: Clear known_wps_freq for network selection
f3be6ee tests: Allow test case descriptions to be written into database
1bd05d0 Interworking: Force normal scan for network selection
51e9f22 P2P: Add option to allow additional client channels
556b30d P2P: Add option to remove channels from GO use
e7ecab4 Use ARRAY_SIZE() macro
39044a7 Introduce ARRAY_SIZE() macro
2e94624 DFS: Handle radar event when CAC actived correctly
5eaf240 DFS: Fix overlapped() function to check only DFS channels
345276a DFS: Adjust center freq correctly for VHT20/VHT40
1dc17db DFS: Fix available channels list for VHT80
34068ac nl80211: Add debug prints on nl_recvmsgs() failure
10b8592 nl80211: Make eloop sockets non-blocking
5f65e9f nl80211: Abstract handling of sockets on eloop
e8d1168 nl80211: Register for IBSS auth frames before eloop
03610ad Clean up get_seqnum() use for IPN
29179b8 Stop ctrl_iface monitor send loop on reinit failure
a2a535f Remove unnecessary wpa_s->conf checks
3318376 Add explicit buffer length checks for p2p_build_wps_ie()
0f01201 Verify that readlink() did not truncate result
f5eb9da nl80211: Clean up if_add() for hostapd use
a288da6 OpenSSL: Fix memory leak on error path
6cb4f11 nl80211: Fix strerror() value in P2P Dev debug messages
35f8363 DFS: Add forgotten break statement
2f243b8 Remove os_strncpy()
24f051e Replace remainining strncpy() uses with strlcpy()
41c526f P2P: Fix snprintf buffer length for group ifname backup
Change-Id: I2e1506cb9219a5a37efbb2ae0dc180fb081c809f
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
8b3b803 Include Extended Capabilities element based on scan results
6903ee6 P2P Extend postponing of concurrent scans for persistent GO
77e3094 hlr_auc_gw: Fix max_chal value validation
3e6547b hlr_auc_gw: Add support for processing command line operations
2b5b875 EAP-AKA server: Fix AUTS processing
9a50ee6 hlr_auc_gw: Update file comments to mention Milenage
5388dc9 Document use of Linux capabilities instead of privileged process
a771c07 Add driver status information to control interface
739faee nl80211: Add some more debug prints for mgmt frame TX
f78f278 nl80211: Fix off-channel Action frame TX from GO with use_monitor
298f518 Get rid of compiler warning in no-CONFIG_CTRL_IFACE builds
ea61aa1 Add no_ctrl_interface config param to clear ctrl_interface
25b65a1 Make sure updated BSS entry does not get added twice to the list
bbc6c72 P2P: Use group formation timeout on persistent group GO
41f8532 P2P: Extend group formation timeout on GO to first data connection
20625e9 P2P: Remove P2P groups on process termination
76fe79e Register wpa_msg callback even if only global ctrl_iface is used
af96448 nl80211: Add more debug prints for send_mlme operations
5d4c78f nl80211: Reset nlmode to station on leaving IBSS
0249c12 Avoid compiler warning with CONFIG_NO_STDOUT_DEBUG=y
ed1bf01 Allow hostapd config file for dynamically added interface
97bacf7 Do not clear hostapd configuration parameters on disable-iface
66f4dd1 hostapd: Fix couple of deinit path cases to clear pointers
f18b781 nl80211: Print more debug info on management frame RX information
89286e9 Re-open ctrl_iface socket on some failure cases as a workaround
3ca96df atheros: Compile fix for driver code not defining IEEE80211_APPIE_FRAME_WNM
762c92a OpenSSL: Split OCSP peer_cert/peer_issuer debug output into parts
f224cf0 HS 2.0: Allow printf format parsing with language:name strings
913c19c Fix wpa_config_parse_string() to null terminate printf decoded values
04e533e Fix language string length validation in parse_lang_string()
742e715 Simplify ctrl_iface sendto() use
6668efd Clear frequency list on empty value
1a9f247 Make scan_freq field to be saved by save_config
aa78cd3 Drop EAP packet with code 10 before EAPOL state machine processing
3cc247a Use configured sched_scan interval for the PNO scan
d047ae6 WPS: Ignore PBC-to-PIN change from M1 to M2 as a workaround
79986bf Print ctrl_iface sendto() failures into debug log
eab2b50 P2P: Cancel group formation timeout on client connection
00eb299 P2P: Fix operation channel configuration update
Change-Id: I9269e23bc8019b951c2a2d3c707562b2e006148b
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
853b49a tests: Increase test_ap_wps_init connection timeout
28de68a P2P: Update peer operating channel from GO Negotiation Confirm
6701fdc P2P: Use the first pref_chan entry as operating channel preference
99d7c76 P2P: Add more debug info on operating channel selection
8d660e0 P2P: Add GO negotiation results into the P2P-GO-NEG-SUCCESS event
2c6f8cf Replace perror() with wpa_printf(strerror) in ctrl_iface calls
e743db4 IBSS RSN: Add IBSS-RSN-COMPLETED event message
4c55901 P2P: Add state info to global STATUS command
ae8c27f Add STATUS command to global control interface
42868f1 Add SAVE_CONFIG command to global control interface
1b9b31c Add SET command for global control interface
0185007 hostapd: Add survey dump support
245e026 hostapd: Split up channel checking into helpers
ba873bd wired: Wait for the link to become active before sending packets
d393de1 P2P: Validate the freq in p2p_group_add
973622c wpa_supplicant: Fix AP mode frequency initialization
d99ca89 P2P: Skip non-P2P interface in p2p_group_remove *
239abaf WPS: Set currently used RF band in RF Bands attribute
bf83eab nl80211: Start P2P Device when rfkill is unblocked
60b13c2 nl80211: Do not change type to station on P2P interfaces
e0591c3 wpa_supplicant: Reduce wait time for control interfaces
5046eb4 P2P: Allow separate interface GO to disconnect low-ack STAs
5bcd5c5 FT RRB: Clear pad field to avoid sending out uninitialized data
b378c41 nl80211: Fix deinit path to unregister nl_mgmt socket
a235aca Fix DETACH command debug prints to avoid use of freed memory
8d6e035 Make global UNIX socket non-blocking for ctrl_iface
86bd141 Change WEP network selection to reject WPA/WPA2 APs
2e145e9 WPS: Fix failure path to allow WSC_NACK and EAP-Failure to be exchanged
3351a38 WPS: Add control interface command for fetching latest status
e96872a WPS: Track peer MAC address from the last operations
ae23935 WPS: Track PBC status
61b6520 WPS: Track result of the latest WPS operation
50396e2 WPS: Add PBC mode activated/disabled events
961750c WPS: Share a common function for error strings
30158a0 nl80211: Update the assoc_freq during connect
83e7bb0 nl80211: Add more debug prints for DEL_STATION commands
Bug: 9056601
Change-Id: I8bc671eb13f4c2c388a4c15cf1ba968c24c9656a
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
1075b29 P2P: Report group formation failure on error to start GO mode
b62b29e Do not block on ctrl_iface monitor events
eb7ddbf WPS: Stop SSDP service before freeing the pending entries
98cbc0a Remove forgotten Xcode defines
0b9d3b2 Interworking: Relax 3GPP info PLMN matching for MNC
c7a67a7 WPS: Disconnect when removing existing WPS network block
fe65847 EAP-EKE: Add server implementation
7e7610d EAP-EKE: Add peer implementation
489202d EAP-SAKE: Use configured server identity
a607b42 EAP-PSK: Use configured server identity
15b042b EAP-MSCHAPv2: Use configured server identity
162865b EAP-IKEv2 server: Use configured server identity
8f89d82 EAP-GPSK server: Use configured server identity
67fe933 Add server identity configuration for EAP server
06aeff5 dbus: Register the AutoScan method call at the right place
78f79fe P2P: Do not add ctrl interface for P2P_DEVICE (p2p-dev-*)
1c42b42 P2P: Fix TDLS and l2_packet init without P2P Device interface
9e6a321 Fix non-P2P build after the P2P_DEVICE changes
d53d259 Fix build with older OpenSSL versions
54d4ba4 nl80211: Silence a compiler warning with older gcc versions
2e5ba4b P2P: Derive group interface name bit more sensibly
c68f620 P2P: Create P2P Device interface if supported
851b0c5 nl80211: Do not indicate P2P_DEVICE support by default
bb4028f P2P: Ignore p2p_no_group_iface when driver advertizes P2P_DEVICE support
7940c79 nl80211: Use wdev id when cancelling wait for frame using P2P_DEVICE
f608081 nl80211: Verify P2P GO/client address with all interface addresses
5fbcb45 nl80211: Fix determining phy name for P2P Device
27ce1d6 nl80211: Fix nl80211_get_wiphy_index() for P2P Device
080585c Add support for OCSP stapling to validate server certificate
72950ed P2P: Remove a call to wpas_p2p_deinit_global()
ab7a1ad nl80211: Fix P2P group interface creating using P2P Device
fa93de4 nl80211: Use wdev_id in nl80211_create_iface_once()
fdc554b nl80211: Use wdev id to obtain P2P Device scan results
597b94f nl80211: Add .get_mac_addr() callback for P2P Device
8e12685 nl80211: Rework setting interface mode
91724d6 nl80211: Introduce i802_set_iface_flags()
eb4582f nl80211: Remove P2P Device interface upon .deinit()
f632e48 nl80211: Fix P2P Device interface initialization
e472e1b nl80211: Handle creation of P2P Device interface
01517c8 nl80211: Allow Android P2P functionality
6bae92e nl80211: Add support for P2P Device in add interface
d6dcfcd nl80211: Add a handler to create_interface
d3aaef8 nl80211: Hold wdev identification for P2P Device
7aad838 nl80211: Identify if nl80211 is capable of P2P Device abstraction
6a71413 nl80211: Rename is_p2p_interface
8393e1a nl80211: Print interface name on set_key()
80ebfd9 VLAN: Avoid access to non-existing interfaces
4345fe9 bridge: Track inter-BSS usage
459eee9 bridge: Use safe default bridge interface
2aaeedf bridge: Give bridge name in per-bss configuration
8a901d7 D-Bus: Emit signal when a station is authorized or deauthorized
9578329 Add AVG_RSSI report in signal_poll
2cc8d8f Add bandwidth and center freq info to signal_poll
1e0e943 Remove 802.11b rates only in case of P2P group operation
2090a0b nl80211: Add prints for kernel events
8743676 TDLS: Validate ext_supp_rates in copy_supp_rates
85b4eac P2P: Do not reply to 802.11b-only Probe Request frames as GO
ec7b97a Interworking: Add support for using eap_proxy offload
4331263 Fix session timeout after ANQP dummy STA entry with SME-in-driver
56cb4e1 wpadebug: Add option to ignore SSL errors
aa20e1a Remove CONFIG_NO_WPA2 build parameter
5d5c4ee Remove compiler warnings with CONFIG_NO_SCAN_PROCESSING
9aaa695 Remove compiler warnings if TDLS is enabled without WPA2
84ae1d4 Fix WNM build without WPA2
c33d5eb Fix build without WPA2 or EAP
1aef400 IBSS RSN: Implement disconnect() callback using sta_deauth()
Change-Id: I4593be5b1478f6532da917423b1d2afa95fb8020
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
d5b559b WNM: Add disassociation timeout processing for ESS_DISASSOC
f65f539 GAS: Reduce query timeout to two seconds
7a56af5 GAS: Assign new dialog token even if previous one is free
9e1ecab GAS: Ignore replays if previous frag_id without dropping GAS session
fa7ae95 Add test code for fetching the last configured GTK
576bce9 P2P: Direct global ctrl_iface commands automatically for P2P
c4bf83a P2P: No duplicate AP-STA-CONNECTED/DISCONNECTED as global event
7793c95 Clean up AP-STA-CONNECTED/DISCONNECTED prints
92c4465 P2P: Mark P2P events global (not specific to interface)
ed496f1 P2P: Clean up debug prints
710ae9a P2P: Move p2p_find stopped event message into p2p_supplicant.c
47bfe49 Add wpa_msg_global() for global events
214e428 Allow global ctrl_iface monitors
89c7ac5 wpa_cli: Set buffer length the same as in wpa_supplicant_ctrl_iface_process()
faf9a85 Add band option (2.4 vs. 5) for filtering scans
b83b1b2 Android: Clarify keystore include directories
6f1127c Android: Add a top level Android.mk
d2a9e2c Abstract and Android sockets for global ctrl_iface
6fd5cea wpa_cli: Allow global interface to be used in interactive mode
2925756 wpa_supplicant: Add -G argument to specify global ctrl group
cf3bebf Allow global ctrl_iface to be used for per-interface commands
058c863 FT RRB: Fix a memory leak on error path
Change-Id: I32a4afb43894167a30c4b0df18fd4846a2945c7c
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
wpa_supplicant is started from /init.*.rc on Android and that seems
to be using umask 0077 which would leave the control interface
directory without group access. This breaks things since Wi-Fi
framework assumes that this directory can be accessed by other
applications in the wifi group. Fix this by adding group access even
if umask value would prevent this.
In most cases, this issue was not hit since the control interface
directory is normally created by that same init.*.rc file with suitable
mode and wpa_supplicant is killed in the way that does not allow it to
remove the file. However, if wpa_supplicant is allowed stop cleanly, it
will remove the directory and the next start could result with the Wi-Fi
framework not being able to use Wi-Fi (and GUI not showing Wi-Fi getting
enabled).
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
commit 6ffdc2f7bd496ace7a46e055f9714e7db4b1f722
Author: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Fri Mar 2 22:31:04 2012 +0200
WFD: Add preliminary WSD request processing and response
This commit does not yet address support for different device roles,
i.e., the same set of subelements are returned regardless of which
role was indicated in the request.
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
Change-Id: I9d63acce719b982c02e589bb59602382e82988c8
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
- Allow AP_SME support
- Do not send disassoc after EAP failure since AP_SME is enabled
and del_station will be called
- Allow group idle timeout to run during WPS disconnect
Change-Id: I7e9e15b9c44804196bc98c01d51a71e24412b91d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
- Based on 0c01d65 : Ignore TX status for Data frames from not associated
STA
Change-Id: I2776ff8e292593f407bf5b9177640c512e06bf0d
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Sync with main tree commit b8349523e460493fa0b4de36c689595109e45e91
Author: Neeraj Kumar Garg <neerajkg@broadcom.com>
Date: Tue Dec 27 23:21:45 2011 +0200
P2P: Reject p2p_group_add if forced frequency is not acceptable
Change-Id: Icb4541a371b05c270e80440d7a7fdea7f33ff61e
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
For p2p, there are virtual interfaces (like p2p-wlan0-X) created and
that results in binding to the common init socket right now.
Instead, have the init bind fail for p2p interfaces and create seperate
sockets specified by the ctrl_interface path in config file
Bug: 5002384
Change-Id: Ia155df079a0bcca1871b6bcab2ef7111f0cba6c1
Based on:
commit 0725cc7b7efc434910e89865c42eda7ce61bbf08
Author: Jouni Malinen <j@w1.fi>
Date: Thu Apr 21 20:41:01 2011 +0300
Enable CONFIG_DRIVER_NL80211=y in the default configuration
nl80211 should be preferred over WEXT with any recent Linux
kernel version.
Change-Id: I26aec5afbbd4f4a1f5fd900912545b6f5050de64
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
