1. Simplify the parceling code. Since the InetAddress inside a
LinkAddress can never be null, we don't need to special-case
the case where it is.
2. Add / update method documentation.
3. Write a unit test.
Change-Id: Iba0a8cecc683d55d736419965e72ee33dd66dc22
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
bug:11598568
Change-Id: Idff5ae81119d8143da096b5291ecbfbc5875cbd4
b/11598568
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Change-Id: Ib93d24a80af1a329694f07c47bd81dfcc1e1b874
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
Note that this CL does not change any behaviour.
At the center of this change is
CaptivePortalTracker#detectCaptivePortal(), which does nothing
except call back into ConnectivityService. Removing it allows us to
simplify code in ConnectivityService. It also allows us to remove
ConnectivityService#captivePortalCheckComplete which was only ever
called in response to this method.
While this does not change any behaviour, it preserves existing
bad behaviour, i.e, that the CAPTIVE_PORTAL_CHECK NetworkInfo
state does not correspond to actual captive portal detection.
We transition into that state and immediately (and unconditionally)
out of it and into CONNECTED.
Change-Id: Ib3797f956d2db5e3cacaaa53e899d81aa8e958af
Hold the right lock while copying info from another
NetworkInfo object to prevent changes being made to it
while the copy is in progress.
Change-Id: I1aa2c29e81e045b0359f957352c438e79e692823
Changes the PacManager to report message back to ConnectivityService
to send a broadcast once the download has completed. This allows the
ConnectivityService to store the correct proxy info for getProxy().
This made the problem arise that ProxyProperties was not handling port
while it had PAC. Added small fix for equals() and parcelization.
The combination of these fixes seems to resolve Bug: 11028616.
Bug: 11168706
Change-Id: I92d1343a8e804391ab77596b8167a2ef8d76b378
This changes the PAC support to not broadcast the Proxy information until
the Local Proxy has started up and successfully bound to a port so that
the local proxy information can be guaranteed to be owned by the proxy.
Bug: 10459877
Change-Id: I175cd3388c758c55e341115e4a8241884b90d633
netd now tracks statistics for tethered interfaces across tethering
sessions, so switch to asking for all tethering stats. (Currently
we're double-counting all tethering data, ever since it started
tracking across sessions.)
Also catch OOME to handle corrupt stats files, which we then dump to
DropBox and then start over.
Bug: 5868832, 9796109
Change-Id: I2eb2a1bf01b993dd198597d770fe0e022466c6b9
Added a hidden API under ConnectivityManager to toggle airplane mode.
This may be a temp solution for b/10653570.
bug:10653570
Change-Id: I0b2b42230073289eb8dc6891317d62b84e26c133
Able to config network specific MTU size. Normally, the default size of MTU is 1500.
US - ATT 1410, TMUS 1440, SPRINT 1422
KR - SKT 1440, KT 1450, LGU+ 1428
JP - KDDI 1420, SoftBank 1340
CA - RGS 1430, FIDO 1430, MTS 1430, BELL 1358, SaskTel 1358
AU - TEL 1400
Bug: 10195070
Change-Id: Ie18650b37a3d44af944f2dae4aa97c04fb12cd5e
I'd changed DetailedState to force ConnectivityService to treat
provisioning apn's specially. In particular so that they wouldn't
be identified they were fully connected until the provisioning
actually started. The problem is that DetailedState is a public enum
that has a CTS test and just changing the CTS to allow for the new
state (CONNECTED_TO_PROVISIONING_NETWORK) was inappropriate.
Instead I've added a new mIsConnectedToProvisioningNetwork variable
and used the DetailedState.SUSPENDED as the intermediate state.
Bug: 10620248
Change-Id: Id4a842398cad67455541ce629959351c27d83639
This change renames the LinkInfo objects to LinkQuailtyInfo. The API is
still hidden; but it can be accessed via reflection.
Bug: 10342372
Change-Id: Ieccea87c467ceae5d7f76298b137573f67396cd6
When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
This change starts tracking traffic quality data for WiFi and mobile
networks. The quality is tracked based on incidental traffic, and not
on specific measurements. Theoretical bandwidths are hard-coded, as
well as sampling interval; although sampling interval can be changed
by setting a system policy.
Bugs filed to remove shortcomings of this change -
10342372 Change LinkInfo name to something better
10342318 Move hardcoded values of MobileLinkInfo to resources
so they can be updated without changing code
Bug: 10006249
Change-Id: I83d8c7594da20fe53abbd5e1f909b1f606b035bb
1. Make addLinkAddress a no-op if the address already exists.
2. Make addLinkAddress, addStackedLink and removeStackedLink
return a boolean indicating whether something changed.
3. Add a removeLinkAddress method (currently there is no way of
removing an address).
3. Move hasIPv6Address from ConnectivityService to
LinkProperties, where it belongs.
Bug: 9625448
Bug: 10232006
Change-Id: If641d0198432a7a505e358c059171f25bc9f13d5
This helps to prepare for future updates from external sources.
Bug: 9298955
Change-Id: I4c63ad5fc1ea3564aab38cfce955de19bad75c0c
(cherry picked from commit fb40801ed8c217ae01082fb1cbd0c30bbf5532ac)
PAC (Proxy auto-config) files contain a single javascript function,
FindProxyForURL(url, host). It gets called to determine what proxy should be
used for a specific request.
This adds PAC support to the system. The ProxyProperties has been modified
to hold the PAC file when one is present. The Proxy method
setHttpProxySystemProperty has been modified to insert a PacProxySelector
as the default ProxySelector when it is required. This new ProxySelector
makes calls to the ConnectivityService to parse the PAC file.
The ConnectivityService and the WifiConfigStore have been modified to support
saving the extra PAC file data.
The ConnectivityService now has a class attached (PacProxyNative) that
interfaces to the native calls for PAC files. The parsing of the PAC file
is handled by libpac (which is being added to external/) which utilizes
libv8 to parse the javascript.
As a fallback to applications that don't use the java ProxySelector, the proxy
is setup to point to a local proxy server that will handle the pac parsing.
bug:10182711
Change-Id: I5eb8df893c632fd3e1b732385cb7720ad646f401
When captive portal checking completes pass back the result.
This is used to enable/disable failing fast for mobile. When
failing fast is enabled we don't check for data stalls and thus
won't be continually trying to do recovery operations, such as
restarting the radio.
Bug: 9462512
Change-Id: I0dea0eee519f8ee7f94e79d40e82c18f30d7fe2e
After detecting there is a captive portal the url used in the
notification for mobile networks should be updateable via gservices.
These urls will be the same as used by CheckMp and is needed for
carriers that have specific provisioning urls such as AT&T and Verizon.
Bug: 9622647
Change-Id: Idcf4dabc72ece1dbbe1d5e5a21e550dd06fe16c7
1. Add a method to return all addresses and all LinkAddresses on
all links (both base links and stacked links). We already had
one for routes, but did not yet have any for addresses.
2. Rename compareRoutes to compareAllRoutes, because unlike the
other compare* methods, it looks at all interfaces. Update
what appears to be its only caller.
3. Update the documentation of the compare* methods to match
reality (they don't return lists) and clarify whether they
look at all links or only the base link.
Change-Id: Ie22e6c7f163d5de8e407248b45171dc28382d2d3
