Migrate Maze's BPF program attaching and detaching functions from
system/netd/server/OffloadUtils.{c, h} to tethering module.
Test: atest TetheringCoverageTests
Test case #1:
Enable WiFi hotspot and check tc filters are added or removed on both
wlan1 and rmnet_data#.
$ adb shell tc filter show dev wlan1 ingress
filter protocol ipv6 pref 1 bpf chain 0
filter protocol ipv6 pref 1 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_upstream6_ether:[*fsobj] direct-action
not_in_hw id 2 tag 7cf020cc09a7c982
filter protocol ip pref 2 bpf chain 0
filter protocol ip pref 2 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_upstream4_ether:[*fsobj] direct-action
not_in_hw id 7 tag 2f87d55b636c082c
$ adb shell tc filter show dev rmnet_data2 ingress;
filter protocol ipv6 pref 1 bpf chain 0
filter protocol ipv6 pref 1 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_downstream6_rawip:[*fsobj] direct-action
not_in_hw id 3 tag 8b3885b75bd261de
filter protocol ip pref 2 bpf chain 0
filter protocol ip pref 2 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_downstream4_rawip:[*fsobj] direct-action
not_in_hw id 6 tag b1c9478c91f8df9a
Test case #2:
Enable USB tethering and check tc filters are added or removed on both
rndis0 and rmnet_data#.
Test case #3:
Enable WiFi and USB tethering and check tc filter are added or removed
on rndis0, wlan1 and rmnet_data#.
Change-Id: I3f9a65043271bc8f5bf1b82ae505c471625ca9de
- Add methods to start and stop IPv6 forwarding upstream
- Populate the upstream IPv6 map when the first rule for any
upstream/downstream pair is created.
- Clear the upstream IPv6 map when the last rule for any
upstream/downstream pair is deleted.
Test: Added coverage to IpServerTest and BpfCoordinatorTest
Change-Id: Ib041081e95f5f449489ab63138de034222ffac8f
The two value types are identical so there is no need to have
separate classes for them.
Test: atest TetheringTests
Change-Id: Ia622b082d0a44373d21f51222f5e675e5bde08e0
Access the IPv4 downstream and upstream BPF map with the built rules.
Test: atest TetheringCoverageTests
Change-Id: I8cd6e49b377c72250988019eea57f93cccd78309
A preparation for starting monitoring conntrack event which is required
by IPv4 tethering offload.
Test: atest TetheringCoverageTests
Change-Id: Ied46aeca193554f52a90889dfdf92827e94845d6
Make the IP subnet persistent if it do not conflict with upstream.
It allow client to reuse its IP that usually reduce DHCP procedure.
Bug: 168169687
Test: atest TetheringTests
Change-Id: Iddc5304730dce7b11c5d124b7eddce057d752bbd
This patch is still needed and should go in now that the
error is fixed.
The patch was submitted into rvc-dev and is already in
rvc-dev-plus-aosp (patch in in ag/11923559, revert
skipped in ag/12072199). A follow-up will remove the
unused services.net-module-wifi target.
Test: originally tested in aosp/1324109
Test: m; manual: flashed, wifi and telephony working
Test: atest NetworkStackCoverageTests
Change-Id: I1074eedb0b0f156a1135e11210ec102de15ea674
Merged-In: Icd141a992c46290c74929785e261a1cd57bc001b
If dhcp server is obsolete, explicitly stop it to shut down its thread.
Bug: 161418295
Test: atest CtsTetheringTest
Change-Id: Ic5b876bd23711ec8d832879a7baee0495246b218
This reverts commit cf86031c12.
Reason for revert: Breaks the build b/160390899
Merged-In: Icd141a992c46290c74929785e261a1cd57bc001b
Change-Id: Ie10e66f61393602f17fbb61bf17230b176bf1f44
The classes should not be picked up from frameworks/base, as they are
part of several mainline modules.
Also refine comments in DhcpResults following feedback in previous
change.
(cherry-pick from internal branch skipping wifi classes; no other
conflict)
Bug: 151052811
Test: m; manual: flashed, wifi and telephony working
Test: atest NetworkStackCoverageTests
Merged-In: I7074651c6a2a7a6b11bcf13cc4bb03833d7d655f
Change-Id: I7074651c6a2a7a6b11bcf13cc4bb03833d7d655f
The BPF tethering coordinator listens to the forwarding rule
changes for updating data limit which is applied in the following
conditions.
- After adding the first rule on a given upstream, add data limit.
- After removing the last rule on a given upstream, clear data limit.
- The service applies a new data limit on current upstream.
The reason for relying on rule changes is because the Tethering and
IpServer objects have multi-internal state machines. It is hard to
synchronize all of their states.
Note that the data limit cleanup for stopping or switching upstream
relies on offload rules are all removed as well.
Bug: 150736748
Test: manual
Change-Id: I829d36339973f9473fe6b616c48aa288f18d1c46
Make BPF tethering offload coordinator, BpfCoordinator,
registers a network stats provider, BpfTetherStatsProvider, and
provide the tethering stats from the BPF map.
Bug: 150736748
Test: new test BpfCoordinatorTest
Change-Id: I22e71f87b67668f7e733e4f215d93bf5b2c9380d
- Add New class PrivateAddressCoordinator to coordinate the private
address conflict problem.
- Downstream prefix would be random in 192.168.0.0/24 ~
192.168.255.0/24.
- If new upstream prefix is conflict with existing downstream prefix,
downstream would be kicked out and it would request a new one.
- The last conflict upstream prefixes would be blacklist. Avoid to
select downstream prefix which is conflict with prefixes in blacklist.
Bug: 130879722
Test: -build, flash, boot
-atest TetheringTests
Change-Id: Ib45b87bcd9eeb5da03fb7ec90b1af9ca53998cf5
If upstream is cellular, set the TTL in Router Advertisements to
"network-set TTL - 1" for carrier requirement. For other non-cellular
upstream, set TTL as "network-set TTL + 1" to preventing arbitrary
distinction between tethered and untethered traffic.
Bug: 154776299
Test: atest TetheringTests
Change-Id: I7f2696a642f96c6aafb5613b980bf5bcdd08bbda
Add the specific implementation of onNewPrefixRequest callback
on IpServer side, also refactor some common code.
Bug: 130741856
Test: atest TetheringTests
Change-Id: If2871bf899cb5890bbfee18063a194c92b6f474e
If BPF offload device config is not enabled:
- Does not add/remove offload forwarding rules through disabling IP
neighbor monitor.
- Does not apply the RA MTU reduction.
Bug: 149997301
Test: atest IpServerTest
Change-Id: I2d6f80f0229f580c4b16243a064e889a6c37f77a
Address issues found during AIDL review:
- Rename clientAddr to singleClientAddr
- Do not use a ParcelableBundle for notifyNetworkTested or
notifyDataStallSuspected; instead use AIDL parcelables for stronger
backwards compatibility guarantees.
Test: atest NetworkMonitorTest ConnectivityServiceTest
ConnectivityServiceIntegrationTest, manual
Bug: 153500847
Change-Id: Id9b71784e5f6294d203230e57737979e063ff0f8
These events don't have MAC addresses, so the code attempts to
create an Ipv6ForwardingRule with a null MAC address. This
crashes when attempting to get the raw MAC address bytes to send
to netd in the TetherOffloadRuleParcel.
This was not caught by unit tests because the test exercise this
code path in a way that is not correct (by sending RTM_DELNEIGH
and NUD_FAILED events with MAC addresses). Fix the unit tests to
properly pass in null MAC addresses for these events.
Bug: 153697068
Test: fixed existing tests to be more realistic
Change-Id: I26d89a81f1c448d9b4809652b079a5f5eace3924
The netd tethering offload IPCs are changing from taking a list
of primitives to taking a TetherOffloadRuleParcel. Modify their
only caller.
Bug: 140541991
Test: atest IpServerTest
Change-Id: I83718c80ef9d31199c87021b4dd5821717fd5ba5
Per API review:
- @IntDef defined on the type integer parameter
- have getters on each parameter that is set in the
TetheringRequest.Builder
- new added API should not be deprecated
Below APIs is moved from system-current to module-lib-current that only
plafrom code(e.g. ConnectivityManager and Settings) can use them.
TetheringRequest.
onTetherableInterfaceRegexpsChanged, TetheringInterfaceRegexps:
Only platform code can use them because interfaces by regular
expressions are a mechanism which is planning to be deprecated.
Also rename some constants for easier to understand.
Bug: 149858697
Bug: 151243337
Test: m doc-comment-check-docs
atest TetheringTests
Change-Id: I45cb21d5bc919f6d32c42650326597d5173ea028
Merged-In: Idd041f0fbeca411ea23e49786a50dd7feb77ef45
Application can specify static ipv4 server and client address to setup
tethering and this is one shot configuration. Tethering service would
not save the configuration and the configuration would be reset when
tethering stop or start failure.
When startTethering callback fired, it just mean tethering is requested
successful. Therefore, callers may call startTethering again if
startTethering successful but do not receive following tethering active
notification for a while. Tethering service never actually does anything
synchronously when startTethering is called:
-startProvisioningIfNeeded just posts a message to the handler thread.
-enableTetheringInternal doesn't do anything synchronously, it just
asks the downstreams to get their interfaces ready and waits for
callbacks.
If tethering is already enabled with a different request,
tethering would be disabled and re-enabled.
Bug: 141256482
Test: -build, flash, boot
-atest TetheringTests
-atest CtsTetheringTest
Change-Id: I0399917e7cefa1547d617e688225544c4fc1a231
Add comments to getters as requested in API review, and remove the
expirationTime private field that was planned to be replaced with
LinkAddress expiration.
Test: atest TetheringTests
Fixes: 150878126
Change-Id: Iecf65859cdeeaac2fa7b817b4f505c510424ac89
When checking that link-local and multicast neighbours are
ignored, make sure the test neighbours are added on the correct
interface. Otherwise, they might be ignored because events on the
wrong interface are ignored, and not necessarily because
link-local and multicast neighbours are ignored.
Test: atest TetheringTests
Change-Id: I4a624ea4ce9ee9a9352afccbc7bf866587d4cdfa
Allow dispatchTetherConnectionChanged to pass in a null
upstream interface and/or null LinkProperties. This will allow
future tests to check what happens when the upstream interface
goes away.
Test: test-only change
Change-Id: I7cfc32d072f23644159d33700d6cd830c426ea19
Use IpNeighborMonitor to listen for ND cache events on the
downstream interface, and push downstream IPv6 fowarding rules
to netd.
Rules are pushed when:
- IPv6 neighbours appear/disappear on the downstream interface.
- The upstream changes.
Test: new unit test
Change-Id: I7b01ba179a4d6bb248fd6c4994e48800613a4efa
This makes the IpServer tests a bit more realistic. It is needed
by an upcoming change that adds new functionality, and is in its
own commit because it modifies the behaviour of all the existing
tests.
Test: atest TetheringTests
Change-Id: I8c3267bea983d1453c010b7b6b85548b9481a153
The callbacks are fired when the list of connected clients or their IP
addresses / hostname change.
Test: flashed, connected 2 devices, verified callbacks
Test: atest TetheringTests
Bug: 135411507
Change-Id: I96291038cf7b39a67547a5f74fcd7cbedc1ca002
Merged-In: I96291038cf7b39a67547a5f74fcd7cbedc1ca002
- Ensure that addAddresses preserves the ordering of addresses
- Fix assertion that was supposed to check equality of TetheredClient
with a different tethering type, and used the same type.
Bug: 148996181
Test: atest TetheringTests
Change-Id: I86cef7b834d7ae7afa3d1d748ccac6b3a7e57ebc
