Application can specify static ipv4 server and client address to setup
tethering and this is one shot configuration. Tethering service would
not save the configuration and the configuration would be reset when
tethering stop or start failure.
When startTethering callback fired, it just mean tethering is requested
successful. Therefore, callers may call startTethering again if
startTethering successful but do not receive following tethering active
notification for a while. Tethering service never actually does anything
synchronously when startTethering is called:
-startProvisioningIfNeeded just posts a message to the handler thread.
-enableTetheringInternal doesn't do anything synchronously, it just
asks the downstreams to get their interfaces ready and waits for
callbacks.
If tethering is already enabled with a different request,
tethering would be disabled and re-enabled.
Bug: 141256482
Test: -build, flash, boot
-atest TetheringTests
-atest CtsTetheringTest
Change-Id: I0399917e7cefa1547d617e688225544c4fc1a231
Add comments to getters as requested in API review, and remove the
expirationTime private field that was planned to be replaced with
LinkAddress expiration.
Test: atest TetheringTests
Fixes: 150878126
Change-Id: Iecf65859cdeeaac2fa7b817b4f505c510424ac89
The callback would be fired when offload started, stopped, or failed.
If offload is not supported, "failed" callback would be fired when user
enable tethering. Enabling multiple tethering would not have multiple
offload status callbacks because offload should already be started or
failed.
Bug: 130596697
Test: -build, flash, boot
-atest TetheringTests
-ON/OFF hotspot
Change-Id: Ia0398601144b0e5f61dc0c5771eacf13e7cfbb59
There are lots of Carrier/OEM requests for tethering
notification customization. So add a new tethering notification
updater class which can let OEM customize the behavior they
wanted.
Bug: 122085773
Test: atest TetheringTests
Change-Id: I7faacde7ac84e93ea0dfe03dd33d2cc41c589225
This change fix two things:
1. Handle ethernet callback in internal thread to avoid crash. IpServer
should be created from tethering thread, otherwise mIpNeighborMonitor of
IpServer would throw
IllegalStateException("start() called from off-thread")
2. Ethernet tethering request may be duplicated if multiple
startTethering is called but no stopTethering
Bug: 130840861
Bug: 148824036
Test: ON/OFF ethernet tehtering manually
atest TetheringTests
Change-Id: I7c5127e96d80d077735010d2e62c7227805ccb10
When checking that link-local and multicast neighbours are
ignored, make sure the test neighbours are added on the correct
interface. Otherwise, they might be ignored because events on the
wrong interface are ignored, and not necessarily because
link-local and multicast neighbours are ignored.
Test: atest TetheringTests
Change-Id: I4a624ea4ce9ee9a9352afccbc7bf866587d4cdfa
Allow dispatchTetherConnectionChanged to pass in a null
upstream interface and/or null LinkProperties. This will allow
future tests to check what happens when the upstream interface
goes away.
Test: test-only change
Change-Id: I7cfc32d072f23644159d33700d6cd830c426ea19
Use IpNeighborMonitor to listen for ND cache events on the
downstream interface, and push downstream IPv6 fowarding rules
to netd.
Rules are pushed when:
- IPv6 neighbours appear/disappear on the downstream interface.
- The upstream changes.
Test: new unit test
Change-Id: I7b01ba179a4d6bb248fd6c4994e48800613a4efa
This makes the IpServer tests a bit more realistic. It is needed
by an upcoming change that adds new functionality, and is in its
own commit because it modifies the behaviour of all the existing
tests.
Test: atest TetheringTests
Change-Id: I8c3267bea983d1453c010b7b6b85548b9481a153
The callbacks are fired when the list of connected clients or their IP
addresses / hostname change.
Test: flashed, connected 2 devices, verified callbacks
Test: atest TetheringTests
Bug: 135411507
Change-Id: I96291038cf7b39a67547a5f74fcd7cbedc1ca002
Merged-In: I96291038cf7b39a67547a5f74fcd7cbedc1ca002
- Ensure that addAddresses preserves the ordering of addresses
- Fix assertion that was supposed to check equality of TetheredClient
with a different tethering type, and used the same type.
Bug: 148996181
Test: atest TetheringTests
Change-Id: I86cef7b834d7ae7afa3d1d748ccac6b3a7e57ebc
Before this change, tetherStatesParcel may be null when there is no
avaialbe tethering interface yet. TetheringManager should handle null
case. But it is annoy to check null case each time and easy to have error.
Report non-null empty TetherStatesParcel object instead.
Bug: 148874619
Test: -build, flash, boot
-atest TetheringTests
-OFF/ON hotspot
Change-Id: I0717e7958c9409648170498d5e76322207856de3
Add a onClientsChanged callback to OnTetheringEventCallback.
The callback will provide information on connected clients combining
at least DHCP leases and WiFi AP information (WiFi AP tethering used).
Test: atest TetheringTests
Bug: 135411507
Change-Id: I7065d081c11bc606d691f76ac8b499dd075d6504
Merged-In: I7065d081c11bc606d691f76ac8b499dd075d6504
This is initial work to allow caller to pass their prefered
configuration to start tethering. Caller may able to specify the
downstream interface ipv4 address with dhcp server disabled for
static IP configuration, or able to exempt entitlement check if
they have permission in follow up CL.
Bug: 141256482
Test: -atest TetheringTest
-ON/OFF wifi tethering
Change-Id: Ic7c3a33195bbd7e72f9b8e73fa148be476b87bf3
Merged-In: Ic7c3a33195bbd7e72f9b8e73fa148be476b87bf3
Also deprecated tethering APIs in ConnectivityManager.
Will have follow up change to remove @hide tethering function in
ConnectivityManager.
Bug: 145093446
Bug: 148038547
Test: -build, flash, boot
-atest TetheringTests
Change-Id: Ia432057bf9056727c4a0ca97d160a49274d33581
Merged-In: Ia432057bf9056727c4a0ca97d160a49274d33581
When leaving a group, all information are erased and no group interface
is passed to tethering service.
For separate group interface, tethering could be stopped
on p2p group interface removed. For shared group interface,
i.e. management interface and group interface share one
interface, ex. p2p0, tethering has no chance to be stopped since management
interface won't be removed after leaving a group.
Bug: 141382930
Test: atest FrameworksNetTests
Test: atest FrameworksWifiTests
Test: atest TetheringTests
Change-Id: Ib611018b67c76ff79c7e6658136721090feb145b
When data saver enabled, tethering would be OFF.
Currently settings would not allow user to turning tethering back.
After aosp/1181583 is merged, user can turn tethering back without
turning data saver OFF.
Bug: 145711175
Bug: 142374233
Test: atest TetheringTests
OFF/ON tethering when data saver ON
Change-Id: I59e662ba771a563f5f1766ba29e05246b8280220
Currently NetworkStatsService is notified when downstream is
updated. However, it seems unnecessary given that tether stats
is persist since boot, and there is no any upstream change when
downstream is changed.
Test: atest NetworkStatsServiceTest IpServerTest
Bug: 130855321
Change-Id: Ie300bfeb0a04678fcfcf300843b6f859af9df91d
Instead use Mockito to achieve the same thing.
Bug: 138801922
Test: atest TetheringTests
Change-Id: I41edd697017f4ce59e6707302bebc0da3d75831d
Merged-In: I41edd697017f4ce59e6707302bebc0da3d75831d
Legacy dhcp server can also be enabled by resource config.
Bug: 144814607
Test: -build, flash, boot
-atest TetheringTests
Change-Id: I8ae5fa3d5bbd88129bd0890f71be6f8a1bfec0eb
Tethering used some PendingIntent/NotificationManager @hide APIs
but they are not able to call now. Replace them with similar
System APIs.
Bug: 122085773
Test: atest TetheringTests
Change-Id: I2201d0e44a6356b8b1974ce0ed80d9913a7aeff5
Replace some ConnectivityManager constants as TetheringManager inside
tethering module. No API change, will have follow up CL to delete
@hide tethering constants in ConnectivityManager and replace caller
to using TetheringManager.
Bug: 144753389
Test: build
Change-Id: Ia1b963669722c32d147375763205ed2f3af52fed
- Using INetd to communicate with netd directly instead of using
NetworkManagementService which is a wrapper of INetd and don't have plan
to be updatable.
- Also replace InterfaceConfiguration by InterfaceController.
- Remove redundant interface flags. Only set interface up/down flag to
netd because netd only use these two flags for INetd#interfaceSetCfg.
- Note that tethering still use NetworkManagementService
to register tethering stats provider and it would also be replaced with
other way in follow up change.
Bug: 136040414
Test: -build, flash, boot
-atest TetheringTests
Change-Id: I4ab0ad387d4bd1773ff94d3b380c1720df07f8d5
Merged-In: I4ab0ad387d4bd1773ff94d3b380c1720df07f8d5
Using alternative way to replace some @hide API.
Bug: 144814072
Test: build, flash, boot
atest TetheringTests
Change-Id: I1e12d69db1ad91dff553e142e17c6a70808e1639
Previous tethering use NetworkState to encapsulate network states.
But NetworkState is hide API and Tethering just use NetworkState
locally that it don't interact with other module by NetworkState.
To avoid hide API accessing and reduce dependency, replace
NetworkState as UpstreamNetworkState in tethering.
Bug: 144758082
Test: atest TetheringTests
OFF/ON hotspot
Change-Id: Ia1837b6ed983a64c3ed72ecf0e6f46d91b3af7da
Move tethering out of ConnectivityService. All client would
use TetheringManager to talk with TetheringService directly.
Bug: 144320246
Test: -build, flash, boot
-atest TetheringTests
Change-Id: Ib051bea724a256f9c4572b566e46ae7b9c4abe6e
Merged-In: Ib051bea724a256f9c4572b566e46ae7b9c4abe6e
To be the unbundled application, tethering can not use UserManagerInternal
method anymore. Replace it by listening user restriction change intent.
Also fix some cleanup from
https://android-review.googlesource.com/c/platform/frameworks/base/+/1131002
Bug: 143195885
Test: -build, flash, boot
-atest TetheringTests
-manual test. Add a trigger point to call
UserManager.setUserRestriction(DISALLOW_CONFIG_TETHERING) from
Settings. Open hotspot -> restrict tethering from new adding trigger
point -> hotspot is OFF and Tethering settings are not available.
Change-Id: I4ed08d20f8b7476b8ecd5d018b75806dd2f22cc1
Merged-In: I4ed08d20f8b7476b8ecd5d018b75806dd2f22cc1
Now tethering would be run in dedicated service.
TetheringManager is the interface used to communicate with
TetheringService. The new call flow would be: ConnectivityManager
-> ConnectivityService -> TetheringManager -> TetheringService.
Note: the return value of #tether(), #untether() and #setUsbTethering()
APIs would always be no error. Client can use #getLastTetherError()
or #getTetheredIfaces or listen tether state change to check
status of corresponding interface.
Bug: 136040414
Bug: 144742179
Test: -build, flash, boot
-atest TetheringTests
-atest FrameworksNetTests
Change-Id: I7e78c0e0a3e70f940a749ba2a39ece7c7ec5b9b3
Merged-In: I7e78c0e0a3e70f940a749ba2a39ece7c7ec5b9b3
1. getTetherApnRequired API rename to isTetherApnRequired.
2. Expose isTetherApnRequired API as system API.
Bug: 142365448
Test: Build pass.
atest TetheringConfigurationTest (PASS)
Change-Id: Iafb2e4fbddb0251e23673742d990ad098a8ae375
Merged-In: Iafb2e4fbddb0251e23673742d990ad098a8ae375
The tether offload JNI library in this patch still have many dependencies
with internal libraries. Will have follow up changes to cut the
dependencies to let it be a unbundled library.
Bug: 136040414
Test: -build, flash, boot
-atest TetheringTests
-atest FrameworksNetTests
Change-Id: Iacf8e0b94135e35672de3ee77c474ee39a00c591
