This is a op CL which prepare for refactor.
Bug: 185649441
Bug: 189410000
Bug: 178116595
Test: atest TetheringTests
Change-Id: I270ff43c01736b9d18bd40a8e88e1379e9e4e863
Adding the configuration to decide using rndis or ncm for usb tethering.
If ncm is configured for TETHEIRNG_USB, then TETHERING_NCM is not
available.
Bug: 162920185
Test: atest TetheringTests
manul testing usb tethering
Change-Id: Ifc7eee2457a950a0e2d1c3cc89a3373a7ad23c9c
The current code does not print these correctly: it prints the
public address twice and then the NAT address. Fix this to print
the src, nat, and dst addresses.
Also dump the output MAC address.
Example output:
IPv4 Upstream: [inDstMac] iif(iface) src -> nat -> dst [outDstMac] age
[66:f1:6f:d8:66:0a] 31(31) 192.168.146.173:48594 -> 11(rmnet_data1) 100.100.109.185:48594 -> 8.8.8.8:853 [00:00:00:00:00:00] 32305ms
[66:f1:6f:d8:66:0a] 31(31) 192.168.146.173:45806 -> 11(rmnet_data1) 100.100.109.185:45806 -> 8.8.4.4:853 [00:00:00:00:00:00] 32305ms
IPv4 Downstream: [inDstMac] iif(iface) src -> nat -> dst [outDstMac] age
[00:00:00:00:00:00] 11(rmnet_data1) 8.8.8.8:853 -> 31(31) 100.100.109.185:48594 -> 192.168.146.173:48594 [0e:a8:7f:ba:76:48] 32305ms
[00:00:00:00:00:00] 11(rmnet_data1) 8.8.4.4:853 -> 31(31) 100.100.109.185:45806 -> 192.168.146.173:45806 [0e:a8:7f:ba:76:48] 32305ms
Test: manual
Bug: 190783768
Change-Id: I93a82064c95027c7c63cb30baf8482ecddcbd09d
1. Dump both upstream and downstream rules.
2. Also dump rule last used time.
Test: manual
Bug: 190783768
Change-Id: I3fffbf4a5dea68e61349de8b41bea49b8a319f86
To avoid log flooding, suppress CMD_IPV6_TETHER_UPDATE and
CMD_NEIGHBOR_EVENT message log because they appear frequentlg and
don't have any content which means they are ueseless for debugging.
Also remove logMessage from BaseServingState to fix duplicated
message because all the message already log in TetheredState
and LocalHotspotState which inherit BaseServingState.
Bug: 162920185
Bug: 185649441
Test: atest TetheringCoverageTests
atest MtsTetheringTestLatestSdk
atest CtsTetheringTest
Change-Id: Ib8fe719f3c1c4a65e6b5152df5e5adf33aba2079
Since tethering run in single thread without any synchronized lock,
remove "Locked" wording from the methods which the use lock before.
Bug: 162920185
Test: atest TetheringCoverageTest
Change-Id: Ia8c057800cab30cdcbacae4db2d706b6427e9861
Currently, when a network that uses 464xlat is torn down,
NetworkCallbacks will receive onLinkPropertiesChanged after
onLost. This is confusing and incorrect.
The incorrect callback is sent because handleLinkProperties
checks that the netId of the agent still exists, not that the
NetworkAgent is still registered. This is normally correct,
because the NetworkAgent is removed from mNetworkAgentInfos and
the netId are removed from mNetworkForNetId by the same method,
disconnectAndDestroyNetwork.
In this specific case it's not correct, because the call to
handleUpdateLinkProperties is from disconnectAndDestroyNetwork
itself via nai.clatd.update and calls Nat464Xlat#stop.
No other callers of handleUpdateLinkProperties are affected
because:
- EVENT_NETWORK_PROPERTIES_CHANGED is called only by
maybeHandleNetworkAgentMessage, which first checks that the
NetworkAgent is registered.
- handlePrivateDnsSettingsChanged only looks at registered
NetworkAgents (it loops over mNetworkAgentInfos).
- handlePrivateDnsValidationUpdate, handleNat64PrefixEvent and
handleCapportApiDataUpdate call getNetworkAgentInfoForNetId,
which will correctly determine that the agent is no longer
registered, since they run on the handler thread and thus
cannot run at the same time as disconnectAndDestroyNetwork.
The existing code contains a check for the netId being current.
This is intended to ensure that an update from a NetworkAgent
cannot affect another agent with the same Network. This extra
check is not necessary, because code running on the handler
thread can never observe a NetworkAgent in mNetworkAgentInfos
unless mNetworkForNetId maps that NetworkAgent's Network to that
NetworkAgent. This is because mNetworkForNetId is updated by the
same methods as mNetworkAgentInfos, and those updates occur on
the handler thread. So all code on the handler thread will see
those two as consistent.
Bug: 176496580
Test: atest FrameworksNetTests CtsNetTestCases HostsideVpnTests
Change-Id: I944f4c6ad36206bdccd85a6ea7ef71324a29c685
Before this change, tethering always report a list of tethered
interfaces and the caller need to use each tethering type's interface
regex to matching tethered list to manual implement the mapping of
tethering type and interface. This change allow caller to get rid of
tethering interface regex.
Bug: 162920185
Bug: 152203943
Test: atest CtsTetheringTest on S
Merged-In: I91bcccd676d109c1b974497ac29bd366a41b8899
Change-Id: I91bcccd676d109c1b974497ac29bd366a41b8899
tryCell configuration would not be force disabled UpstreamMonitor stop.
If tethering stop with using mobile upstream and swap with SIM fron no
dun to dun supported, dun request would be filed even tethering is not
active.
Bug: 173068192
Test: atest TetheringTests
Change-Id: I5505655f52da9fdca2fd43a58e043a9ab727741d
Before this change, tethering always report a list of tethered
interfaces and the caller need to use each tethering type's interface
regex to matching tethered list to manual implement the mapping of
tethering type and interface. This change allow caller to get rid of
tethering interface regex.
Bug: 162920185
Bug: 152203943
Test: atest CtsTetheringTest on S
Ignore-AOSP-First: Currently aosp would automerge to mainlne-prod, merge
to sc-dev first to avoid adding new API to mainline-prod
CTS-Coverage-Bug: I already add cts test(ag/14622456), but Lint
still complaint because my cts is under packages/modules/Connectivity/
but it only check whether CL touching platform/cts
Change-Id: I91bcccd676d109c1b974497ac29bd366a41b8899
Replace the isFeatureEnabled function which is check with apex version.
Bug: 187946226
Test: Set device config flag and check the result
Change-Id: Iba44a01e2fdd0698dcb338ea4a8fe8147cbaa7dd
TetheringService call different Settings API to check write settings
permission between R and S.
Bug: 182211575
Test: install S module to R device and both run mts tests build with S
and R.
Ignore-AOSP-First: to address the conflict
Change-Id: I3e7f6525e9776992bd96b17c132b749b12285bbd
This is supported by:
1. Utilize the new API from both NetworkStatsProvider
and IOffloadControl to send data warning quota to hardware.
And pass the warning reached notification back to NPMS.
2. Disable software solution introduced in R release for
V1.1+ hardware, since now we can fully offload data warning
and limit notification to hardware.
Test: atest TetheringTests
Fix: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: Ie49461694d77ab7f25a549433b01b5b0167bd489
This is a no-op change that just adapt new API from
NetworkStatsProvider to get warning and limit bytes at the same
time. This change also stores them locally for subsequent
patches to set warning bytes to hardware.
Test: Will be included in the subsequent patch.
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: Iec01cb01fd1ce481ce0bd736762baddde1e38084
This is a no-op change that redirect both V1.0 and V1.1 callback
events to the same handling function. Since the V1.1 callback
is extended from V1.0 callback, we can safely use V1.1
callback for both V1.0 and V1.1 control.
The change also provides interface for subsequent
OffloadController changes to set warning and limit at the
same time.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I6505a04de8c57357dd1fa9ce898c13395e497816
While the actual part that track default request is inside
UpstreamNetworkMonitor, instead of passing it from Tethering,
move it into counter-part CL and use it from
UpstreamNetworkMonitor.
Since the current code is replaced by registerSystemDefaultCallback
in Android S, implement it inside the api30 shim implementation
to provide an unified interface to tethering.
Test: atest TetheringCoverageTests
Bug: 185952829
Change-Id: Iaf21b6b662aa6aba79c2b75379128b8523f81f02
This is no longer necessary as all the methods that take it are
running on on the handler thread, either in Tethering itself or
on the state machine thread in IpServer, which runs on the same
thread as Tethering.
Specifically:
- interfaceStatusChanged, interfaceAdded, interfaceRemoved,
interfaceLinkStateChanged: run from mNetdCallback, which always
posts them to mHandler.
- setWifiTethering: only called by enableTetheringInternal, which
is called by the following:
- startTethering, stopTethering: via lambda posted to mHandler
- IpServerCallback#requestEnableTethering: called by IpServer
while processing a command.
- setEthernetTethering: only called by enableTetheringInternal.
- EthernetCallback: runs on mExecutor, which posts to mHandler.
- getLastTetherError: only used by the test. Renamed to
getLastErrorForTest to ensure no other callers.
- sendTetherStateChangedBroadcast: called only by
notifyInterfaceStateChange, which is called only by
- IpServerCallback#updateInterfaceState, which is called only
by sendInterfaceState, which is called by various IpServer
state enter methods.
- notifyLinkPropertiesChanged: called only by
IpServerCallback#updateLinkProperties, which is only called by
IpServer#sendLinkProperties, which is only called by:
- Code that processes CMD_IPV6_TETHER_UPDATE
- IpServer#handleNewPrefixRequest: only called when processing
CMD_NEW_PREFIX_REQUEST.
- IpServer#sendInterfaceState (see above)
- handleWifiApAction, handleWifiP2pAction: only called by
mStateReceiver, which runs on the handler thread
- tether(String, int): called by:
- tether(String, IIntResultListener): posted to mHandler
- changeInterfaceState: called by:
- EthernetCallback (see above)
- enableWifiIpServingLocked: called by handleWifiApAction and
handleWifiP2pAction (see above)
- tetherMatchingInterfaces: only called by handleUsbAction,
which is run from mStateReceiver on the handler thread.
- untether(String): called by:
- untether(String, IIntResultListener): posted to mHandler
- changeInterfaceState (see above)
- setUsbTethering: called by:
- setUsbTethering(boolean, IIntResultListener): posted to mHandler
- enableTetheringInternal (see above)
- setNcmTethering: called by enableTetheringInternal (see above)
- getTetheredIfaces: called only by TetheringTest. Renamed to
getTetheredIfacesForTest to ensure no other callers.
- getErroredIfaces: unused, deleted in this CL
- getTetheredIfaces: called by:
- isTetheringActive: called by onUserRestrictionsChanged, which
is only called by mStateReceiver
- TetheringTest
- dump(): changed to run on handler thread
- upstreamWanted: called by
- TetherModeAliveState#enter
- TetherModeAliveState#updateUpstreamWanted, which is called
only by TetherModeAliveState#processMessage.
Test: atest TetheringCoverageTests
Test: enabled/disabled hotspot, USB tethering
Change-Id: Id49d33f027b8df4c97fda480ff239c0ba90bb96a
This is in preparation for removing mPublicSync.
Test: m
Test: adb shell dumpsys tethering
Test: atest TetheringTests TetheringIntegrationTests
Change-Id: Ib2c9d0bff23614f76c8e075d32cb03412d3d21f7
