This is in preparation for removing mPublicSync.
Test: m
Test: adb shell dumpsys tethering
Test: atest TetheringTests TetheringIntegrationTests
Change-Id: Ib2c9d0bff23614f76c8e075d32cb03412d3d21f7
Attach BPF program may be failed with the netlink error message
"Invalid argument". Per debug kernel trace, it is failed in
comparing the kind name in tc_new_tfilter.
Log:
05-05 19:44:42.329 1073 2332 2332 W tc_new_tfilter:
Specified filter kind does not match existing one
Test: enable usb tethering and check the follows
$ adb shell tc filter show dev <upstream, downstream> ingress
filter protocol ipv6 pref 1 bpf chain 0
filter protocol ipv6 pref 1 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_upstream6_ether:[*fsobj]
direct-action not_in_hw id 3 tag 94ca9b12972fdea8
filter protocol ip pref 2 bpf chain 0
filter protocol ip pref 2 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_upstream4_ether:[*fsobj]
direct-action not_in_hw id 9 tag 992aa9bfd0503457
filter protocol ipv6 pref 1 bpf chain 0
filter protocol ipv6 pref 1 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_downstream6_rawip:[*fsobj]
direct-action not_in_hw id 4 tag 7fb60e556b8f3be7
filter protocol ip pref 2 bpf chain 0
filter protocol ip pref 2 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_downstream4_rawip:[*fsobj]
direct-action not_in_hw id 6 tag e41426095404fb64
Change-Id: I471a2e34c626a3737cbd2754e4d1b3000bcf6ba6
This allows the coverage tests to manually trigger native coverage
collection, as a workaround for collection not being triggered
automatically by the coverage infrastructure.
Bug: 185202279
Test: atest TetheringCoverageTests
Change-Id: I619fc267cf1743dd2218e3dd42546b0d4e9da193
Add ACCESS_NETWORK_STATE to Tethering CTS because tests call to
EthernetManager#isAvailable() which is enforcing permission check
now. Without ACCESS_NETWORK_STATE, some tests will fail by lack
of permission.
Bug: 174573778
Test: CtsTetheringTest
Change-Id: I735d98527c14c12fb0f2df536cda25fdd84152f1
Ignore-AOSP-First: Security vulnerability issue should not fix on
aosp branch.
Some OEM may have special mobile data icon show up when non-default
(e.g. DUN) mobile connection connected even wifi is also connected.
So always connected DUN may let user hard to distinguish tethering
upstream in those OEM's devices. Also release unused mobile connection
may safe power.
This CL removes unnecessary code from selectPreferredUpstreamType.
In particular:
- When a DUN or HIPRI upstream is selected, calling
registerMobileNetworkRequest is unnecessary. A mobile
NetworkRequest is always registered unless a non-mobile upstream
is selected.
- When a non-mobile upstream is found, releasing the mobile
NetworkRequest is unnecessary in selectPreferredUpstreamType
because it will be done by chooseUpstreamType immediately after
selectPreferredUpstreamType returns.
- When no upstream is found and cellular upstream is not permitted,
it is not necessary to release the mobile NetworkRequest. When
cellular is not permitted, no such NetworkRequest will be filed
because registerMobileNetworkRequest checks with EntitlementManager
before actually requesting the network. If cellular becomes the
upstream and then later becomes not permitted because of an
entitlement failure, all tethering will be stopped by Settings.
Note: currently legacy upstream selection has two known bugs:
1. If mobile has higher priority than non-mobile network, mobile request
should never be released and always prefer use mobile. But in practice,
mobile request would be released when tethering select non-mobile network
as upstream.
2. If mobile has higher priority than wifi network and default network
is wifi but mobile is still connected, tethering would choose mobile as
upstream because it has higher priority. Mobile disconnecting may not
trigger tethering to switch its upstream to wifi because currnetly
tethering rely on CONNECTIVITY_ACTION broadcast to handle upstream
disconnect.
Bug: 173068192
Test: atest TetheringTests
Change-Id: Id5df58af830cc534ecd79041ddf8a04171047e9b
This is a no-op change that try to use 1.1 HAL if available.
Otherwise, fallback to 1.0 HAL. The change also provides version
information for subsequent patches to determine what to do for
specific version.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I6a3ce877cdff2496087b97b191a9bfd5b0792827
This is necessary change for minimize the code size when
repeatedly restarting OffloadController in subsequent
patches.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I0b02d01cd8749d81c9d020dee7fdb4f80e18ae98
This is useful for OEMs that want to use RNDIS or NCM as a
local-only link that is directly connected to some other host.
This can be used to implement USB tethering using NCM, which
currently only supports local-only mode.
Bug: 175090447
Test: TetheringIntegrationTests:EthernetTetheringTest#testLocalOnlyTethering
Change-Id: I0ffaa46e4640e5b235340a15d25909106ceb0c07
When a 464xlat upstream disconnects, onLinkPropertiesChanged is
called after onLost. This breaks an UpstreamNetworkMonitor
assumption that no callback will ever arrive after onLost.
Bug: 173068192
Fix: 185117377
Test: new unit test
Change-Id: I4ff1eca6d5ed1680ff716c71b683891c8a0e5a77
Add separate testing for unicast and multicast RAs.
Make the test more realistic by:
- Enabling forwarding. This ensures that the daemon actually
receives the RS.
- Adding a link-local route. This ensures that the daemon is
actually able to send a unicast response.
Bug: 154669942
Test: atest TetheringPrivilegedTests
Change-Id: Ibb1f51b5b1871657d7feff39335d3c71586cf64f
