The connection service will become the mainline module.
Remove the hidden API usage of NetworkAgent.
Bug: 170598012
CTS-Coverage-Bug: 170598012
Test: atest FrameworksNetTests FrameworksTelephonyTests
atest FrameworksWifiTests
Change-Id: I4e4040ae7f94bdf479c7df9ec2ffabafbe06331c
Merged-In: I4e4040ae7f94bdf479c7df9ec2ffabafbe06331c
Create a network callback to notify network agent after the
native network being destroyed by netd which means the network
is fully disconnected. The NetworkAgent may handle this event
after sending disconnect state to ConnectivityService to proceed
its pending works that have to be done after it.
Bug: 178725261
Test: make update-api
Change-Id: I602ff2c688909473b03b72c9407d4286608cff4c
Merged-In: I602ff2c688909473b03b72c9407d4286608cff4c
This is similar to onBlockedStatusChanged(Network, boolean) but
it allows the callback holder to know the exact reason why
networking was blocked. It is useful to privileged system
components such as JobScheduler that are able to ignore some
blocked reasons but not others.
Also add a new BLOCKED_REASON_LOCKDOWN_VPN that is used when
networking is blocked because an always-on VPN is in
lockdown mode.
Also move BLOCKED_METERED_REASON_MASK to ConnectivityManager.
This is necessary because ConnectivityService must ensure that
the blocked status callbacks are correctly sent when meteredness
changes (e.g., a UID that is blocked on metered networks will
become unblocked on a network that becomes unmetered). In order
to do this it needs to know which reasons apply only on metered
networks.
Bug: 165835257
Test: unit tests in subsequent CLs in the stack
Change-Id: I647db4f5a01280be220288e73ffa85c15bec9370
This setting is OEM upstream requirement for mobile data
preferred apps feature.
Bug: 171872461
Test: atest FrameworksNetTests
Merged-In: Ic5e0515b2b948de3d333c8d8e073d0b15514562a
Change-Id: Iba17bf68cffbe39d1c08ad94364b41bbf851bf57
Have getter/setter methods for external modules that can
get/set the setting values.
Bug: 182538166
Test: atest FrameworksNetTests
Merged-In: I82225a43f95e3e1d3e52c4e7a0fc541c0087292e
Change-Id: I61cb00216494e35b6e0dfe444b177cad36ad8afb
Create a network callback to notify network agent after
netd has created the network, so that the NetworkAgent may
wait for this callback and ensure the pre-work to communicate
with netd completed.
Bug: 178725261
Test: make update-api
Change-Id: I8c2ff7bd6980ae838abc5669f9419d62741b8666
Merged-In: I8c2ff7bd6980ae838abc5669f9419d62741b8666
Vpn constructs NetworkAgent with this exposed NetworkAgent
constructor. Given NetworkAgent is moving into the incoming
connectivity module, Vpn which is outside the module will not
be able to access it if it's not in the API surface. Thus,
expose it to allow Vpn to use it.
Bug: 182963397
Test: make update-api
Change-Id: Ic2357dcfff3233e0dd17b48b0e376a5095ef60fa
Merged-In: Ic2357dcfff3233e0dd17b48b0e376a5095ef60fa
CTS-Coverage-Bug: 172183305
(cherry-picked from ag/13966707)
NetworkScore will be a part of mainline module, so the external
callers cannot call its hidden APIs. Expose needed APIs to
the external callers.
CTS-Coverage-Bug: 182963397
Bug: 182963397
Test: m
Change-Id: Iddf8c71a5f51a40bc6ff78626b3e8ee530d1b7eb
Merged-In: Iddf8c71a5f51a40bc6ff78626b3e8ee530d1b7eb
(cherry-picked from ag/13947595)
These constants will now be including all the reasons for why an
uid's network access can be blocked, instead of only the
restrictions that could be imposed by NPMS.
Bug: 183473548
Test: atest ./tests/cts/hostside/src/com/android/cts/net/HostsideRestrictBackgroundNetworkTests.java
Merged-In: I4c544415e12adf442fd2415c371b1b70a39c3aa4
Change-Id: I6dcea43fbefa9eac8b5a971b822a5be5422a54b4
Provide a formal way to construct a new NetworkRequest from an
existing instance. The network capabilities inside the
NetworkRequest is hidden. There is no way to pass a
NetworkRequest and update its capabilities. Add
NetworkRequest.Builder creating from an existing instance to
allow to clone the network capabilities.
Bug: 172183305
Test: make update-api
Change-Id: I068462b2a1410daf67b0c95f2b643d396f079531
Merged-In: I068462b2a1410daf67b0c95f2b643d396f079531
* changes:
Expose registerDefaultNetworkCallbackAsUid.
Support calling registerDefaultNetworkCallback for another UID.
Store the effective UID in NetworkRequestInfo.
Have a new method in NetworkAgentConfig.Builder for Vpn to set
allowBypass.
Bug: 182963397
Test: m
Change-Id: I3f244464438325ee7f8a1b953d3fb28186293628
* changes:
TransportInfo: Add a generic redaction mechanism
Revert "Revert "Expose uids related APIs in NetworkRequest and N..."
Revert^2 "Replace the usage of UidRange"
This replaces the existing mechanism for redacting location sensitive
fields with a more extensible mechanism. Currently supported redactions
are for the following permissions:
i. ACCESS_FINE_LOCATION
ii. LOCAL_MAC_ADDRESS
iii. NETWORK_SETTINGS
Also, removed WifiInfo from ConnectivityServiceTest to reduce cross
dependencies on wifi code.
Bug: 156867433
Bug: 162602799
Test: atest android.net
Test: atest com.android.server
Change-Id: I2bb980c624667a55c1383f13ab71b9b97ed6eeab
Revert^2 "Add shims for NetworkRequest"
b72b3ca768fc25ef72dc78f1396b08447b8ef5c6
NetworkRequest is moving into the incoming connectivity mainline
module. The hidden setUids becomes inaccessible outside the
module. Shims for support cts in different API levels will need
to use it to verify the behavior of NetworkRequest. Thus, expose
it to the API surface.
Also, VPN uses getUids and setUids to control network
capabilities. Networkcapabilities is a part of incoming
connectivity mainline module but VPN is not. Thus, exposing these
two methods are needed to allow VPN to continue using it.
Test: make update-api
Bug: 172183305
Change-Id: I4b8e1aa558e3459a932535f9901f4ae86b0ecb67
Merged-In: I107c329d4d7130d488772166eae8b5e7aaa2ff04
Revert "Add shims for NetworkRequest"
Revert submission 1626206-replaceUidRange
Reason for revert: Breaking build - b/183106405
Reverted Changes:
I0b79c73e8:Add shims for NetworkRequest
I4bc0daf5a:Replace the usage of UidRange
I4e5aec6ef:Replace the usage of UidRange
I107c329d4:Expose uids related APIs in NetworkRequest and Net...
Change-Id: I45e08f89533af0d6851add38fecb5c6c114615ae
The API is already used by settings and should be usable by setup
wizards. It is the only way for a caller outside of the system_server to
trigger the captive portal application.
The API is already CTS tested in android.net.cts.CaptivePortalTest.
Fixes: 182871577
Test: atest CtsNetTestCases:android.net.cts.CaptivePortalTest
Change-Id: Ie8d9a546b54524ba837715baa94a07d1f993d8d3
ConnectivityManager will be a part of incoming connectivity
mainline. Settings will no longer to access the hidden methods.
For those methods that accept the interaction from users, they
should be exposed as formal interface to allow the
functionality. Expose them to API surface.
Bug: 172183305
Test: make update-api
Change-Id: Id4533b94291766bb060af0091b5ccb81a00630fd
NetworkRequest is moving into the incoming connectivity mainline
module. The hidden setUids becomes inaccessible outside the
module. Shims for support cts in different API levels will need
to use it to verify the behavior of NetworkRequest. Thus, expose
it to the API surface.
Also, VPN uses getUids and setUids to control network
capabilities. Networkcapabilities is a part of incoming
connectivity mainline module but VPN is not. Thus, exposing these
two methods are needed to allow VPN to continue using it.
Test: make update-api
Bug: 172183305
Change-Id: I107c329d4d7130d488772166eae8b5e7aaa2ff04
SystemServer cannot call the hidden API of ConnectivityManager
after it becomes a part of mainline module. So expose the hidden
API for SystemServer.
Bug: 182963354
Test: m services
Change-Id: I9c1dc8eb1401dbdc069d5c9fc3992f4c7939b70e
These constants are used by a MODULE_LIBRARIES API, they should
have the same visibility.
Test: ConnectivityServiceTest
Change-Id: I14cb189d949fe552f463cae3002801fd8cf8230c
* changes:
Remove per-user preference when the user is removed
Expose the enterprise per-profile networking API.
Implement setNetworkPreferenceForUser.
Public API for per-profile network preference.
Add tests for setNetworkPreferenceForUser
Following up on feedback from API council, change the String type
to CharSequence in the get and set Venue friendly name API.
Bug: 179163405
Test: atest ConnectivityServiceTest CtsNetTestCasesLatestSdk:CaptivePortalDataTest
Test: atest NetworkNotificationManagerTest NetworkMonitorTest
Change-Id: Ia63974cd2ff5975bde410eb93731d4b1def36d19
Also unify the listener for Oem settings, which have
never been released as public API (it is slated to be
released in S).
Test: FrameworksNetTests
Change-Id: I84ba363dd0ec03871c37b1c3a31e5557d9aa12e7
Context is more useful than ContentResolver, it can provide more
information if we want to change the behavior in the future.
Bug: 172183305
Test: atest FrameworksNetTests
Change-Id: I5702c7d74b862a76558b94f1abe2c6df9eb7f097
Merged-In: I5702c7d74b862a76558b94f1abe2c6df9eb7f097
