A simple mechanism for doing this is to take advantage of the fact
that we require the device to reboot after a sim has been changed.
Thus when connectivity service is started we wait to get a connection
then call checkMobileProvisioning once. We also add a check that
the DEVICE_PROVISIONED is true, i.e. SetupWizard has been run.
Bug: 9784024
Change-Id: I5c1936744f6fc55a447ae44cd36eec3849d27e21
Add support for routing sockets as if they were another user's.
This is for services that handle delegated network tasks like MediaServer and DownloadManager.
Change-Id: Id20efc1f5c2cce6f8838d777762f6c0a703a9437
VPNs are now per user instead of global. A VPN set by user A routes only
user A's traffic and no other user can access it.
Change-Id: Ia66463637b6bd088b05768076a1db897fe95c46c
Various applications such as Skype and our legacy VPN code
do not understand routes pointed directly at point-to-point
interfaces and require a default gateway IPv4 address in
order to function.
Grudgingly accept that routes without default gateways Are Hard
and use gatewayed routes instead. This causes routing to go from:
default dev clat4 scope link
to:
default via 192.0.0.4 dev clat4 scope link
192.0.0.4 dev clat4 scope link
and those apps now work.
Bug: 9597256
Bug: 9597516
Change-Id: I7b7890873802d3cb99affd6eb70b8ab75e7a2cf6
The new one is often null when disconnected, so using the new fails.
In other situations, it's the connections on the old network we want
to reset anyway, so the old code when it would work would also do
the wrong thing (unless new iface == old iface).
bug:9112928
Change-Id: I1fcae89cc3aa9d712e516e7c97cece0b89869bd9
To date WiFi only devices were defined by the list of networkAttributes
in config.xml overriden in on a per-device basis. This change is the
simplest change needed to determine this at runtime and therefore allowing
a single build to support the two different configurations.
Bug: 8562845
Change-Id: I34de5c6accc718b199c13815537de1debfe3dc91
VPN used to just watch the interface, but that is insufficient. There
is no promise that the interface will go down when we're done with it.
Now that wifi stays on in scan-only mode despite user turning it off
it seems that the interface is left up, even in AP mode.
Now listening for ConnectivityService broadcast that the network we were on
has disconnected and tearing down the VPN then or when the interface
goes away.
bug:8550083
Change-Id: Icf414497bc55bead69de04e91f39f90ac2e6578a
Fixes issues brought in by change to isHostRoute. isHostRoute
was technically correct, but the callers really wanted hasNextHop
behavior.
bug:8597268
Change-Id: I360761ccfa98b2ba34642f717a78fa71ec1bae4f
The Global http proxy shouldn't be used by apps, but can be useful in certain
conditions.
bug:8264794
bug:8557674
Change-Id: Ia3cbe542e448d9e74d0492626a13e9fd34ad797a
Change our order of operations so that secondary route table
adds succeed. Working to understand the why of this too.
bug:8361314
Change-Id: Ie25061eb38c62eaa5e60aa8a488496de49bdbd9d
Normally, clatd is stopped when a connection disconnects.
However, if the connection's LinkProperties change, or if the
disconnect somehow gets lost (e.g., because of bug 8486114),
then we need to stop it (and possibly restart it).
Bug: 8276725
Change-Id: Ib8ad0d653ed8d0cd70b7414bcaa8fdaef8ba5fcc
Allows the external BT stack the means to communicate with
ConnectivityService during reverse tethering.
bug:8445208
Change-Id: Ice7dfb0b50c9481d359aed14a51372878185171c
1. Add a Nat464Xlat service that ConnectivityService can use
to start and stop clat. When clat is started, the service
waits for the clat interface to come up and then calls
ConnectivityService to add the appropriate routes.
2. Make ConnectivityService start clat when an IPv6-only mobile
interface is connected. We only support clat on mobile for
now.
3. Make tethering use the interface that has the IPv4 default
route insted of using the base interface of the
LinkProperties. This allows us to tether to a stacked
interface, which is needed for tethering with 464xlat.
Bug: 8276725
Change-Id: I24480af69ee280f504399062638af0836a56268e
Currently, ConnectivityService adds and removes routes to/from
the routing table only based on the LinkProperties's routes.
Make it update routes based on the stacked links as well.
Bug: 8276725
Change-Id: I9a2adf537af5a04de0aaab3780afbcc3bb5c6acb
modifyRoute takes both an interface name and a LinkProperties.
This is redundant because all callers get the interface name
from the LinkProperties. Make modifyRoute get the interface
name from the LinkProperties instead.
Change-Id: I41ba8e0a10241c2f1107204fcaca2be74556042b
These checks while technically reasonable are a hard to swallow API change
that may break existing apps and pragmatically serves no purpose: the protected
data is available in publicly readable java VM properties.
Change-Id: I522c493c2604a33e28d99e2be31054326c9a8323
Removing these properties broke video playback as they used
a custom dns resolver. We'll work together to resolve our
resolver issues in the future, but this was the easy fix to
get things working again.
bug:8173236
Change-Id: I687dae59eda4fc449efc34eed11c3dc88a110ad0
Set dns servers for secondary nets and attach the
processes (pids) that are using the secondary nets
to the secondary nets associated dns cache.
bug:5465296
Change-Id: I1eaf92d5c6b81d287e9fb2763b3d972d9de34395
