This is no longer necessary as all the methods that take it are
running on on the handler thread, either in Tethering itself or
on the state machine thread in IpServer, which runs on the same
thread as Tethering.
Specifically:
- interfaceStatusChanged, interfaceAdded, interfaceRemoved,
interfaceLinkStateChanged: run from mNetdCallback, which always
posts them to mHandler.
- setWifiTethering: only called by enableTetheringInternal, which
is called by the following:
- startTethering, stopTethering: via lambda posted to mHandler
- IpServerCallback#requestEnableTethering: called by IpServer
while processing a command.
- setEthernetTethering: only called by enableTetheringInternal.
- EthernetCallback: runs on mExecutor, which posts to mHandler.
- getLastTetherError: only used by the test. Renamed to
getLastErrorForTest to ensure no other callers.
- sendTetherStateChangedBroadcast: called only by
notifyInterfaceStateChange, which is called only by
- IpServerCallback#updateInterfaceState, which is called only
by sendInterfaceState, which is called by various IpServer
state enter methods.
- notifyLinkPropertiesChanged: called only by
IpServerCallback#updateLinkProperties, which is only called by
IpServer#sendLinkProperties, which is only called by:
- Code that processes CMD_IPV6_TETHER_UPDATE
- IpServer#handleNewPrefixRequest: only called when processing
CMD_NEW_PREFIX_REQUEST.
- IpServer#sendInterfaceState (see above)
- handleWifiApAction, handleWifiP2pAction: only called by
mStateReceiver, which runs on the handler thread
- tether(String, int): called by:
- tether(String, IIntResultListener): posted to mHandler
- changeInterfaceState: called by:
- EthernetCallback (see above)
- enableWifiIpServingLocked: called by handleWifiApAction and
handleWifiP2pAction (see above)
- tetherMatchingInterfaces: only called by handleUsbAction,
which is run from mStateReceiver on the handler thread.
- untether(String): called by:
- untether(String, IIntResultListener): posted to mHandler
- changeInterfaceState (see above)
- setUsbTethering: called by:
- setUsbTethering(boolean, IIntResultListener): posted to mHandler
- enableTetheringInternal (see above)
- setNcmTethering: called by enableTetheringInternal (see above)
- getTetheredIfaces: called only by TetheringTest. Renamed to
getTetheredIfacesForTest to ensure no other callers.
- getErroredIfaces: unused, deleted in this CL
- getTetheredIfaces: called by:
- isTetheringActive: called by onUserRestrictionsChanged, which
is only called by mStateReceiver
- TetheringTest
- dump(): changed to run on handler thread
- upstreamWanted: called by
- TetherModeAliveState#enter
- TetherModeAliveState#updateUpstreamWanted, which is called
only by TetherModeAliveState#processMessage.
Test: atest TetheringCoverageTests
Test: enabled/disabled hotspot, USB tethering
Change-Id: Id49d33f027b8df4c97fda480ff239c0ba90bb96a
This is in preparation for removing mPublicSync.
Test: m
Test: adb shell dumpsys tethering
Test: atest TetheringTests TetheringIntegrationTests
Change-Id: Ib2c9d0bff23614f76c8e075d32cb03412d3d21f7
Some OEM may have special mobile data icon show up when non-default
(e.g. DUN) mobile connection connected even wifi is also connected.
So always connected DUN may let user hard to distinguish tethering
upstream in those OEM's devices. Also release unused mobile connection
may safe power.
This CL removes unnecessary code from selectPreferredUpstreamType.
In particular:
- When a DUN or HIPRI upstream is selected, calling
registerMobileNetworkRequest is unnecessary. A mobile
NetworkRequest is always registered unless a non-mobile upstream
is selected.
- When a non-mobile upstream is found, releasing the mobile
NetworkRequest is unnecessary in selectPreferredUpstreamType
because it will be done by chooseUpstreamType immediately after
selectPreferredUpstreamType returns.
- When no upstream is found and cellular upstream is not permitted,
it is not necessary to release the mobile NetworkRequest. When
cellular is not permitted, no such NetworkRequest will be filed
because registerMobileNetworkRequest checks with EntitlementManager
before actually requesting the network. If cellular becomes the
upstream and then later becomes not permitted because of an
entitlement failure, all tethering will be stopped by Settings.
Note: currently legacy upstream selection has two known bugs:
1. If mobile has higher priority than non-mobile network, mobile request
should never be released and always prefer use mobile. But in practice,
mobile request would be released when tethering select non-mobile network
as upstream.
2. If mobile has higher priority than wifi network and default network
is wifi but mobile is still connected, tethering would choose mobile as
upstream because it has higher priority. Mobile disconnecting may not
trigger tethering to switch its upstream to wifi because currnetly
tethering rely on CONNECTIVITY_ACTION broadcast to handle upstream
disconnect.
Bug: 173068192
Test: atest TetheringTests
Change-Id: Id5df58af830cc534ecd79041ddf8a04171047e9b
This is a no-op change that try to use 1.1 HAL if available.
Otherwise, fallback to 1.0 HAL. The change also provides version
information for subsequent patches to determine what to do for
specific version.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I6a3ce877cdff2496087b97b191a9bfd5b0792827
This is useful for OEMs that want to use RNDIS or NCM as a
local-only link that is directly connected to some other host.
This can be used to implement USB tethering using NCM, which
currently only supports local-only mode.
Bug: 175090447
Test: TetheringIntegrationTests:EthernetTetheringTest#testLocalOnlyTethering
Change-Id: I0ffaa46e4640e5b235340a15d25909106ceb0c07
When a 464xlat upstream disconnects, onLinkPropertiesChanged is
called after onLost. This breaks an UpstreamNetworkMonitor
assumption that no callback will ever arrive after onLost.
Bug: 173068192
Fix: 185117377
Test: new unit test
Change-Id: I4ff1eca6d5ed1680ff716c71b683891c8a0e5a77
Current upstream selection code suffers from a race where if the
CONNECTIVITY_ACTION broadcast for a given network switch is
received and processed before the NetworkCallbacks for that
network switch, upstream selection just re-selects the same
upstream it had before. The incorrect upstream persists until
another CONNECTIVITY_ACTION is received.
Fix this by defining a new EVENT_DEFAULT_SWITCHED message code
communicated from UpstreamNetworkMonitor to Tethering, and send
that whenever the default network switches.
The message is sent in onLinkPropertiesChanged, because the
tethering code stores all information about networks in an
UpstreamNetworkState structure that contains Network,
LinkProperties and NetworkCapabilities. When a network switch
occurs, onLinkPropertiesChanged always follows onAvailable and
onCapabilitiesChanged, and thus marks the first point in time
when all the information is available.
This CL tries not to change existing codepaths too much, but
it does move the update of mDefaultInternetNetwork from
onCapabilitiesChanged to onLinkPropertiesChanged. This should
not be a problem because the only thing that reads
mDefaultInternetNetwork is getCurrentPreferredUpstream, which,
in the case of a default network switch, will be run by the
onLinkPropertiesChanged which will immediately follow.
Bug: 173068192
Test: changes to existing unit tests show bug is fixed
Change-Id: Ic9196bc92892811b25bda463ffd839ee5c19d294
This is needed for forwarding to work, so it should be dumped.
New output:
Forwarding rules:
29(29) -> 14(rmnet2) 86dd 00:00:00:00:00:00 00:00:00:00:00:00
[ap_br_wlan2]: iif(iface) oif(iface) v6addr srcmac dstmac
14(rmnet2) 29(ap_br_wlan2) 2001:240:2423:13fa:3c21:e35a:6a59:ff8a da:17:fd:70:3d:14 26:5b:b2:ee:bc:ba
IPv4: [inDstMac] iif(iface) src -> nat -> dst
[da:17:fd:70:3d:14] 29(29) 192.168.222.151:39208 -> 14(rmnet2) 100.102.14.231:39208 -> 172.217.175.3:80
[da:17:fd:70:3d:14] 29(29) 192.168.222.151:47386 -> 14(rmnet2) 100.102.14.231:47386 -> 216.58.197.196:443
Also add a call to getHostAddress() to remove the / on IPv6
forwarding rules.
Test: manual
Change-Id: I347ea5a3fd88c51f1fae0c76c75dfa30c68a55ad
Add a unit test to verify that BPF coordinator access downstream4
and upstream4 map while the conntrack event was received.
Verify shim API for IPv4:
- tetherOffloadRuleAdd
- tetherOffloadRuleRemove
- tetherOffloadGetAndClearStats
- tetherOffloadSetInterfaceQuota
- isAnyIpv4RuleOnUpstream
Test: atest TetheringCoverageTests
Change-Id: Ia57f07990d8750fd6ff67d7f4a18aa610336024a
Required because XDP offload needs input interface mac address
to be a part of the key. The mac address is used for checking
packets which are received from exceped input interface.
Test: atest TetheringCoverageTests, TetheringPrivilegedTests
Change-Id: Ied159454b516c0d70efe0a85744d1bb606892f2d
Currently, BpfCoordinator only sets the data limit on a given
upstream whenever the first IPv6 rule is created on that
upstream, and clears it whenever the last rule is deleted on that
upstream. It never does this when adding or removing IPv4 rules.
This makes it impossible to offload traffic on IPv4-only
networks.
Fix this by setting the limit when IPv4 rules are created or
deleted as well.
Test: atest TetheringCoverageTests
Manual tests as the follows
Test {add, clear} limit with IPv6-only network [OK]
Test {add} limit with IPv4-only upstream [OK]
TODO:
Test {clear} limit with IPv4-only network. blocked by aosp/1579873
because the IPv4 rules have never deleted.
Change-Id: I5a29bdd18e564318759f617023163e23fb5a3ed0
Currently, Tethering files NetworkRequests even when
config_tether_upstream_automatic is enabled. This is incorrect:
when the automatic upstream selection is enabled, the tethering
upstream should always follow the default network and there is
no need to file any requests.
These requests are harmful when tethering is not using cellular
as its upstream, because:
- If the device does not use mobile data always on, the request
causes the cellular network to be brought up, causing power
draw.
- Even if the device does use mobile data always on, the request
causes the cellular network to come to the foreground, which
allows all apps to access it, causing potential data usage.
Amend the existing testGetCurrentPreferredUpstream to cover these
changes, by making that test case always set automatic upstream
mode. This does not result in any loss of meaningful test
coverage, because getCurrentPreferredUpstream is only ever called
when chooseUpstreamAutomatically is enabled.
Bug: 173068192
Test: atest TetheringTests
Change-Id: I068a5338699a3ed04f24f97f785ea89ff5890e50
UpstreamNetworkMonitor is the part of tethering that files
NetworkRequests for upstream netwoks, but it currently does not
know all the requirements for upstream selection. For example, it
does not know whether automatic upstream selection is in use.
This forces the upstream selection code to be split between
UpstreamNetworkMonitor and Tethering. This makes it difficult to
follow.
This CL ensures that all information about upstream requirements
(DUN required, automatic upstream selection, tryCell) is passed
to UpstreamNetworkMonitor so it can be aware of it.
This CL also removes the ability for UpstreamNetworkMonitor's
callers to call registerMobileNetworkRequest or
releaseMobileNetworkRequest. In a future CL, this will be
automatically done by UpstreamNetworkMonitor depending on the
upstream requirements.
This CL is a no-op refactoring with no behaviour changes.
Bug: 173068192
Test: atest TetheringTests
Change-Id: I174f765c616e0dbe2aa493c12613e6131cff0666
