- reworked EthernetNetworkFactory to support multiple active Ethernet
interfaces
- allow vendors to specify network capabilities + ip config through XML
config overlay
Test: manual using hikey960 + multiple usb->eth adapters
Change-Id: Ie39bcb0d2a3f960f497222159c7bd5797accaa68
Can be used by a network to indicate when it's congested, meaning that
apps should defer network traffic that could be done at a later time.
Test: bit FrameworksNetTests:android.net.,com.android.server.net.,com.android.server.connectivity.VpnTest,com.android.server.ConnectivityServiceTest
Bug: 64133169
Change-Id: I97664d041920c8d6e3f9fb7c9e8638925b15c30e
The "roaming" state of a network really belongs on NetworkCapabilities
instead of being published through NetworkInfo.isRoaming(). One major
reason is to support developers creating NetworkRequests for a
non-roaming network.
Test: bit FrameworksNetTests:android.net.,com.android.server.net.,com.android.server.connectivity.
Bug: 68397798, 16207332
Change-Id: I0722d7b38d0478de3834b869552f48403af9d553
add different logic to handle static ip configuration.
Bug: b/64914694 <http://b/issue?id=64914694&query=64914694>
Test: follow the following steps to switch ethernet config
1.Plug Ethernet cable ,Ethernet succeed to access internet with DHCP mode
2.Change Ethernet IP settings to Static
3.Input correct ip , gateway, prefix length, DNS
4.UI show Connected, but failed to access Internet.
Change-Id: I223bca85814e94745fbb8b50ca677eb7032e9bb3
(cherry picked from commit 44a107bc8f058c6ac1aab6fbfbf60bf8f3474711)
If the interface disappears between interfaceAdded() and
setInterfaceUp, we'll crash with an IllegalStateException in
NetworkManagementService#setInterfaceConfig.
Ignore the error instead. This should be safe because we don't
modify any state unless our calls succeed.
Bug: 62870779
Test: builds aosp_bullhead-eng
Change-Id: If8c2375f7fffe25a9fa79dc4f1981c745384a276
1. Remove the IP provisioning thread and just attempt
provisioning indefinitely whenever we have an interface.
2. Make all methods run on the passed-in handler thread. This
makes it easier to verify correctness by code inspection.
3. Remove the code that changes the factory score depending on
whether we're tracking an interface and have link. This is
unnecessary complexity, as there is no penalty to accepting a
request even if we don't have an interface.
4. Remove code duplication and only have one codepath for
stopping layer 3.
Tested the following are tested with this CL:
- Booting with an interface connected.
- Disconnecting/reconnecting the Ethernet cable repeatedly,
particularly at inconvenient times (e.g., during provisioning).
- Similarly, disconnecting/reconnecting USB Ethernet interfaces.
- Falling back to another Ethernet interface if the currently
tracked Ethernet interface is unplugged.
- Disconnecting and restarting provisioning when provisioning is
lost (e.g., if the default route is deleted).
- Crashing the system server causes Ethernet to reconnect on
restart.
- The above while running watch -n 0.1 adb shell dumpsys ethernet
(cherry picked from commit 9effed6f9e)
Bug: 62308954
Test: tested on marlin with USB ethernet adapters, as described
Test: smoketested on aosp_bullhead
Change-Id: Ie3041f1d453d15c81eee81adfc8593269c499d79
This fixes a longstanding bug where after a DHCP timeout, we
would never restart the DHCP client and get an IP address until
the link bounced.
Also, two minor improvements:
1. Dump IpManager info when dump() is called.
2. When onLinkPropertiesChange is called, also update
mLinkProperties. We were already sending the updated
LinkProperties to the NetworkAgent, so this is really only
useful for dump(), but it's just one line and safe because
onLinkPropertiesChange already grabs the lock.
Bug: 17733693
Change-Id: I42c3319cb4bc151c547ed721baf5e83f97e23862
Requiring CHANGE_NETWORK_STATE is pointless, since immediately
after doing that we require CONNECTIVITY_INTERNAL, which is
a system-only permission.
Bug: 23597341
Change-Id: If4c8ecbb319e547c2c81d2dcc3c7bbb63e0bc2af
The intent of the code was to catch exceptions, but it wasn't
actually doing that because when a netd command fails we get an
IllegalStateException, not a RemoteException.
Bug: 23581852
Change-Id: I66c7c33bdc7b0d0de4fa5cd92dff054797cf860f
Replaced the method where we used to enforce static permission
CHANGE_NETWORK_STATE to method calls that also check for WRITE_SETTINGS.
This is due to the merging of CHANGE_NETWORK_STATE permission with
WRITE_SETTINGS in M.
Change-Id: I104ac41733663b4f6b5cd30e7314574ec4acdc07
Previously we did not stop DHCP or try to force a disconnect.
This made it impossible to reconnect by unplugging and
replugging an USB Ethernet adapter.
Bug: 17736828
Change-Id: Idd8576a96b063b5ca726ee9149800bdcb0f62bd1
Network Factories are allowed to go below, but networks need to be
constrained. Allowing the network to go below 0 meant that -1 could
sometimes leak through and foul the logic.
bug:17361330
Change-Id: Ife34ca0f9c233dd3c3df80f6fea580af43afcdeb
Also make static IP configuration more robust (e.g., tear down
our NetworkAgent when we switch between static and DHCP).
Bug: 16114392
Bug: 16893413
Change-Id: Ib33f35c004e30b6067bb20235ffa43c247d174df
NetworkFactory only indicates if we're interested in new connections. It
shouldn't be used to tear down existing connections (they have unwanted callbacks
for that).
Supports linger properly as well as dealing with tie scores.
bug:15612739
Change-Id: Ib3dfe673d3645b9dc4756c176958409a64ec32e4
(cherry picked from commit 8b07ee36a2)
It was attempting to update the NetworkAgent before the NetworkAgent
was created, causing NullPointerExceptions.
bug:15407938
Change-Id: Ie36b906df4b12f095a16d1b30c847a55b074d60c
Make NetworkFactory a concrete class and divide responsibilites between it and NetworkAgent.
Factory will track requests and by default give a single connect/disconnect api for ease
of use. Then NetworkAgent is created and destroyed as needed with very simple logic.
Change-Id: I401c14a6e5466f2fc63b04219b97ff85bb9af291
(cherry picked from commit 8af038d056)
1. If DHCP fails, set the score to 0. Coupled with changes in
NetworkAgent, that will cause us to retry DHCP the next time
the link is plugged in.
2. Send LinkProperties before sending NetworkInfo, because of
a race in NetworkAgent.
3. Make Ethernet work properly after a runtime restart.
4. Improve locking.
5. Clarify how things work in comments.
Bug: 15295359
Change-Id: I06cd683a1633838bca1ec177e61f1829889d3934
(cherry picked from commit 21be8b6dc7)
