The change is specific to AT&T as they want no signaling from device during provisioning.
I've tested following cases:
- expired AT&T SIM to make sure provisioning flow works as expected.
- airplane mode on/off with both active and expired AT&T SIM.
- wifi <-> mobile transitions work okay.
- LTE with Verizon SIM (basic sanity).
bug: 13190133
Change-Id: I215963174ae6000ae71d1dda693f95413f3d6e81
This is a start and two tests succeed:
Tested expired AT&T SIM and waiting 15min for alarm to fire.
Tested a provisioned Verizon SIM and works normally.
I've NOT tested AT&T where I've properly completed the provisioning.
I've NOT tested T-Mobile SIM either provisioned or not-provisioned.
I've NOT tested provisioning over WiFi.
I've NOT tested that WiFi <-> Mobile works
I've NOT tested voice calls, SMS, MMS
...
The current bug is below, but it is poorly named either it should be
renamed or a new bug created.
Bug: 13190133
Change-Id: I0a09f642614cd27a8655e9dae764b8999ce485b8
With netd allowing overlapping rules for uid range rules the interface
name is needed to make sure only the correct rule is removed.
Bug: 12134439
Change-Id: I94f77f154f49ca8d5f6cf49683a4473cc92c3eb7
The value for the TCP initial receive window comes from,
in order,
kernel
/proc/sys/net/ipv4/tcp_default_init_rwnd
init.rc (via properties)
net.tcp.default_init_rwnd
properties
net.tcp.default_init_rwnd
gservices
Settings.Global.TCP_DEFAULT_INIT_RWND
Bug: 12020135
Change-Id: I0e271be19472900fa9f3bab037d53383ec014a9e
SO_BINDTODEVICE is not needed with policy routing.
SO_BINDTODEVICE was also used on the default iface which causes problems
when the default iface is IPv6 only and the socket tries to connect to a
IPv4 address.
Bug: 12940882
Change-Id: I5b2bde0ac5459433fc5749f509072a548532f730
requestRouteToHost will only allow system applications to make routes
exempt from the VPN's routing rules.
If a VPN is currently running and a non-system app requests a route it
will only succeed if that host is currently covered by a VPN exempt
routing rule. Otherwise it will fail.
For example, if a VPN is running and the MMS network is brought online
those routes will be added as VPN exempt. If an application then tries
to request a route to a MMS endpoint it will succeed because the routes
already exist. If an application tries to request a route to a host
covered by the VPN the call will fail.
Bug: 12937545
Change-Id: If7bcec91bbb96c62c8fb69748c975847e6c00b6f
The calling package name will be used to check if an application is a
system application when deciding if a route should be exempt from VPN
routing rules.
Bug: 12937545
Change-Id: I2c09c875fe9bb9685871a0a801ddcbb32fc17405
This may mean that secondary networks have bad network settings,
but currently default settings are overriden by secondary nets
which seems worse.
bug:13211589
Change-Id: I08d56e618208781bf6b21a88663c2b8503a4f226
Refactored the directory structure so that services can be optionally
excluded. This is step 1. Will be followed by another change that makes
it possible to remove services from the build.
Change-Id: Ideacedfd34b5e213217ad3ff4ebb21c4a8e73f85
This is necessary so that the framework can know whether an IPv6
address is likely to be usable (i.e., if it's global scope and
preferred). Also, it will simplify the address notification
methods in INetworkManagementEventObserver, which currently take
the address, the flags, and the scope as separate arguments.
1. Add flags and scope to the class and update the unit test.
Use the IFA_F_* and RT_SCOPE_* constants defined by libcore.
Since most callers don't know about flags and scope, provide
constructors that default the flags to zero and determine the
scope from the address. Addresses notified by the kernel will
have these properly set. Make multicast addresses invalid.
Update the class documentation.
2. Provide an isSameAddressAs() method that compares only the
address and prefix information between two LinkAddress
objects. This is necessary because an interface can't have
two addresses with the same address/prefix but different
flags.
3. Update LinkProperties's addLinkAddress and removeLinkAddress
to identify existing addresses to add/remove using
isSameAddressAs instead of implicit equals(). Specifically:
- If addLinkAddress is called with an address that is already
present, the existing address's flags and scope are updated.
This allows, for example, an address on an interface to go
from preferred to deprecated when it expires, without it
having to be removed and re-added.
- If removeLinkAddress is called with an address that is
present but with different flags, it deletes that address
instead of failing to find a match.
4. Update the INetworkManagementEventObserver address
notification methods to take just a LinkAddress instead of
LinkAddress, flags, and scope. While I'm at it, change the
order of the arguments for consistency with the other
functions in the interface.
Change-Id: Id8fe0f09a7e8f6bee1ea3b52102178b689a9336e
Currently address{Updated,Removed} pass in the address as a
string such as "fe80::1/64". Use LinkAddresses instead, since
that's what it is.
This makes the code more robust in the unlikely case that netd
passes in an invalid string. In the future we can move flags and
scope into the LinkAddress itself and simplify the code further.
Bug: 9180552
Change-Id: I66599f9529cf421caa7676fdd0141bb110b8589e
These are sent if the device receives IPv6 Router Advertisements
with DNS server configuration options. Currently, nothing listens
to them; in a future change we will use them as IPv6 DNS servers.
[Cherry-pick of d3b7821c8f]
Bug: 9180552
Change-Id: I05000c0cd3867a68ab390102e8470b6912a9d3aa
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
bug:11598568
Change-Id: Idff5ae81119d8143da096b5291ecbfbc5875cbd4
Could occur when requestRouteToHostAddress is called on a network
with no associated tracker. Code later in the method handles
this case gracefully but code introduced in JB throws an exception.
Change-Id: I6c8a0e313ecbcca120aeb5dd0802a72114749aa1
b/11598568
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Change-Id: Ib93d24a80af1a329694f07c47bd81dfcc1e1b874
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
In isMobileOk attempting to connect to clients3.google.com/generate_204 we
sometimes see a proxy server will not let the connection go to our
server and instead returns 200 instead of 204. By using Https we by pass
proxy servers and we will always connected to our server.
The number of loops is increased from 3 to 4 and half the the retires
will use Http and half will use Https.
I also, added mTestingFailures which can be set to true by setting
persist.checkmp.testfailures to 1. This will cause checkMobileProvisiong
to always fail so we can test https & http.
Bug: 9972012
Change-Id: I870606037dcffe5250843980517ac52218266e02
Needed to do an http post instead of a get for one carrier.
Do this by putting an auto-submitting form in the data to be
interpreted as a html doc by the browser. The ACTION_VIEW
intent only works on http uri, but by specifying ACTION_MAIN/
CATEGORY_APP_BROWSER we could use data:text/html.
bug:11168810
Change-Id: Ifd33e1c3c7f9f40b6add39e446e6a7d7cde22549
We're getting some false positive results on this check and
while it was coded to try 3 times given sufficient independent addrs
the default url resolves to a single address so we'd just try once.
Rework to try again even with fewer urls to try to reduce the false
positives.
Also adds a random query param to fool proxies into not caching.
bug:9972012
Change-Id: Ib719f40ec612065ca6bcd919549fc1164506d35a
Changes the PacManager to report message back to ConnectivityService
to send a broadcast once the download has completed. This allows the
ConnectivityService to store the correct proxy info for getProxy().
This made the problem arise that ProxyProperties was not handling port
while it had PAC. Added small fix for equals() and parcelization.
The combination of these fixes seems to resolve Bug: 11028616.
Bug: 11168706
Change-Id: I92d1343a8e804391ab77596b8167a2ef8d76b378
Currently the captive portal check URL is generated by
concatenating scheme, "://", IP address, and port. This breaks
for IPv6 because IPv6 addresses in URLs must be enclosed in
square brackets (e.g., http://2001:db8::1/generate_204 is
invalid; should he http://[2001:db8::1]/generate_204 instead).
The resulting MalformedURLException causes isMobileOk to report
that there is no captive portal, even if there is one.
Fortunately the three-arg URL constructor already knows how to
construct URLs with IPv6 addresses. Use that instead of
generating the URL ourselves.
Bug: 10801896
Change-Id: I02605ef62f493a34f25bb405ef02b111543a76fd
There are two bugs one is I was clearing the notification in
CaptivePortalTracker when entering the ActivateState. (double check
according to bug 5021626 we should be calling enter)
Second is we could have the need to display both icons but can't
because we only allow one.
The solution I'm proposing here is to allow two notifications and
have then controlled separately.
Bug: 10886908
Change-Id: I30e7130bc542535492d175640a4990c592f32806
Add the condition that the connected network needs to be TYPE_MOBILE.
This eliminates checking on connecting to secondary networks like
FOTA, MMS, SUPL ...
This reduces unnecessary attempts to bring up multiple connections at
the same time. Especially in the light of the trouble we're having with HFA
on Sprint, where we don't want to connect to any other network until HFA
has completed.
Bug: 10758001
Change-Id: Id294536b70304a51de4752bc1a4ffac734f10f1a
