When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
This change starts tracking traffic quality data for WiFi and mobile
networks. The quality is tracked based on incidental traffic, and not
on specific measurements. Theoretical bandwidths are hard-coded, as
well as sampling interval; although sampling interval can be changed
by setting a system policy.
Bugs filed to remove shortcomings of this change -
10342372 Change LinkInfo name to something better
10342318 Move hardcoded values of MobileLinkInfo to resources
so they can be updated without changing code
Bug: 10006249
Change-Id: I83d8c7594da20fe53abbd5e1f909b1f606b035bb
1. Make addLinkAddress a no-op if the address already exists.
2. Make addLinkAddress, addStackedLink and removeStackedLink
return a boolean indicating whether something changed.
3. Add a removeLinkAddress method (currently there is no way of
removing an address).
3. Move hasIPv6Address from ConnectivityService to
LinkProperties, where it belongs.
Bug: 9625448
Bug: 10232006
Change-Id: If641d0198432a7a505e358c059171f25bc9f13d5
This helps to prepare for future updates from external sources.
Bug: 9298955
Change-Id: I4c63ad5fc1ea3564aab38cfce955de19bad75c0c
(cherry picked from commit fb40801ed8c217ae01082fb1cbd0c30bbf5532ac)
PAC (Proxy auto-config) files contain a single javascript function,
FindProxyForURL(url, host). It gets called to determine what proxy should be
used for a specific request.
This adds PAC support to the system. The ProxyProperties has been modified
to hold the PAC file when one is present. The Proxy method
setHttpProxySystemProperty has been modified to insert a PacProxySelector
as the default ProxySelector when it is required. This new ProxySelector
makes calls to the ConnectivityService to parse the PAC file.
The ConnectivityService and the WifiConfigStore have been modified to support
saving the extra PAC file data.
The ConnectivityService now has a class attached (PacProxyNative) that
interfaces to the native calls for PAC files. The parsing of the PAC file
is handled by libpac (which is being added to external/) which utilizes
libv8 to parse the javascript.
As a fallback to applications that don't use the java ProxySelector, the proxy
is setup to point to a local proxy server that will handle the pac parsing.
bug:10182711
Change-Id: I5eb8df893c632fd3e1b732385cb7720ad646f401
When captive portal checking completes pass back the result.
This is used to enable/disable failing fast for mobile. When
failing fast is enabled we don't check for data stalls and thus
won't be continually trying to do recovery operations, such as
restarting the radio.
Bug: 9462512
Change-Id: I0dea0eee519f8ee7f94e79d40e82c18f30d7fe2e
After detecting there is a captive portal the url used in the
notification for mobile networks should be updateable via gservices.
These urls will be the same as used by CheckMp and is needed for
carriers that have specific provisioning urls such as AT&T and Verizon.
Bug: 9622647
Change-Id: Idcf4dabc72ece1dbbe1d5e5a21e550dd06fe16c7
1. Add a method to return all addresses and all LinkAddresses on
all links (both base links and stacked links). We already had
one for routes, but did not yet have any for addresses.
2. Rename compareRoutes to compareAllRoutes, because unlike the
other compare* methods, it looks at all interfaces. Update
what appears to be its only caller.
3. Update the documentation of the compare* methods to match
reality (they don't return lists) and clarify whether they
look at all links or only the base link.
Change-Id: Ie22e6c7f163d5de8e407248b45171dc28382d2d3
Add a network type for establishing connections to the apn used for
the initial connection.
Enable some debug for now.
Bug: 8733613
Change-Id: Ia627ac0cf5715660b6d02bb13a83d46ec1727b87
Move away from storing the configs in the Intent to prevent issues with
PendingIntents and multiple configs.
The Dialog now queries ConnectivityService for the configuration to
display in the management dialog.
Change-Id: I0e0ef52db840152914d117a24f776d8106e836ff
Move markSocketAsUser to the top of IConnectivityManager.aidl to make
calls from
framework/native/services/connectivitymanager less fragile
Change-Id: Iba92c21dfef175b570521f34e7ee2732e5a0a9c9
Add support for routing sockets as if they were another user's.
This is for services that handle delegated network tasks like MediaServer and DownloadManager.
Change-Id: Id20efc1f5c2cce6f8838d777762f6c0a703a9437
Network stats are now read out of the kernel in one sweep, instead of
reading per-UID. We now accumulate the delta traffic between each
stats snapshot using the well-tested SamplingCounter pattern.
Since Wi-Fi and mobile traffic have different costs, track each
separately. Avoids counting misc interfaces like loopback and
ethernet under total.
Bug: 5543387
Change-Id: I642004dc530113c27ef79f2abbae51d8af30117f
VPN used to just watch the interface, but that is insufficient. There
is no promise that the interface will go down when we're done with it.
Now that wifi stays on in scan-only mode despite user turning it off
it seems that the interface is left up, even in AP mode.
Now listening for ConnectivityService broadcast that the network we were on
has disconnected and tearing down the VPN then or when the interface
goes away.
bug:8550083
Change-Id: Icf414497bc55bead69de04e91f39f90ac2e6578a
Fixes issues brought in by change to isHostRoute. isHostRoute
was technically correct, but the callers really wanted hasNextHop
behavior.
bug:8597268
Change-Id: I360761ccfa98b2ba34642f717a78fa71ec1bae4f
The Global http proxy shouldn't be used by apps, but can be useful in certain
conditions.
bug:8264794
bug:8557674
Change-Id: Ia3cbe542e448d9e74d0492626a13e9fd34ad797a
LinkProperties's equals() method was broken by the addition of
stacked interfaces. The reason was that equals() was checking
the equality of mStackedInterfaces.keys(), which is just an
enumeration, instead of mStackedInterfaces.keySet(), which
actually contains the keys. The test was failing, but I didn't
notice.
Fix the bug and make the test check the objects more in depth
so it can give more detailed error messages when equals() fails.
Bug: 8276725
Change-Id: Ie990bd75f641c28e63e54d953dcd0f4de13f7c9f
Allows the external BT stack the means to communicate with
ConnectivityService during reverse tethering.
bug:8445208
Change-Id: Ice7dfb0b50c9481d359aed14a51372878185171c
Currently, isHostRoute returns true iff the gateway address is
the unspecified address (0.0.0.0 or ::). Thus, it will return
true for any route that has no gateway (e.g., a route pointing at
a point-to-point interface), even if the route is not a host
route.
Fix this by checking the prefix length instead. This should be
safe because:
1. mDestination cannot be null, since it's created using new.
2. Host routes created using makeHostRoute (which is what
ConnectivityService calls) always have the correct prefix
lengths (/32 or /128) set.
Bug: 8276725
Change-Id: I14285398823fa6c312349128c7cc216cad4a84c9
