This is no longer necessary as all the methods that take it are
running on on the handler thread, either in Tethering itself or
on the state machine thread in IpServer, which runs on the same
thread as Tethering.
Specifically:
- interfaceStatusChanged, interfaceAdded, interfaceRemoved,
interfaceLinkStateChanged: run from mNetdCallback, which always
posts them to mHandler.
- setWifiTethering: only called by enableTetheringInternal, which
is called by the following:
- startTethering, stopTethering: via lambda posted to mHandler
- IpServerCallback#requestEnableTethering: called by IpServer
while processing a command.
- setEthernetTethering: only called by enableTetheringInternal.
- EthernetCallback: runs on mExecutor, which posts to mHandler.
- getLastTetherError: only used by the test. Renamed to
getLastErrorForTest to ensure no other callers.
- sendTetherStateChangedBroadcast: called only by
notifyInterfaceStateChange, which is called only by
- IpServerCallback#updateInterfaceState, which is called only
by sendInterfaceState, which is called by various IpServer
state enter methods.
- notifyLinkPropertiesChanged: called only by
IpServerCallback#updateLinkProperties, which is only called by
IpServer#sendLinkProperties, which is only called by:
- Code that processes CMD_IPV6_TETHER_UPDATE
- IpServer#handleNewPrefixRequest: only called when processing
CMD_NEW_PREFIX_REQUEST.
- IpServer#sendInterfaceState (see above)
- handleWifiApAction, handleWifiP2pAction: only called by
mStateReceiver, which runs on the handler thread
- tether(String, int): called by:
- tether(String, IIntResultListener): posted to mHandler
- changeInterfaceState: called by:
- EthernetCallback (see above)
- enableWifiIpServingLocked: called by handleWifiApAction and
handleWifiP2pAction (see above)
- tetherMatchingInterfaces: only called by handleUsbAction,
which is run from mStateReceiver on the handler thread.
- untether(String): called by:
- untether(String, IIntResultListener): posted to mHandler
- changeInterfaceState (see above)
- setUsbTethering: called by:
- setUsbTethering(boolean, IIntResultListener): posted to mHandler
- enableTetheringInternal (see above)
- setNcmTethering: called by enableTetheringInternal (see above)
- getTetheredIfaces: called only by TetheringTest. Renamed to
getTetheredIfacesForTest to ensure no other callers.
- getErroredIfaces: unused, deleted in this CL
- getTetheredIfaces: called by:
- isTetheringActive: called by onUserRestrictionsChanged, which
is only called by mStateReceiver
- TetheringTest
- dump(): changed to run on handler thread
- upstreamWanted: called by
- TetherModeAliveState#enter
- TetherModeAliveState#updateUpstreamWanted, which is called
only by TetherModeAliveState#processMessage.
Test: atest TetheringCoverageTests
Test: enabled/disabled hotspot, USB tethering
Change-Id: Id49d33f027b8df4c97fda480ff239c0ba90bb96a
This is in preparation for removing mPublicSync.
Test: m
Test: adb shell dumpsys tethering
Test: atest TetheringTests TetheringIntegrationTests
Change-Id: Ib2c9d0bff23614f76c8e075d32cb03412d3d21f7
Attach BPF program may be failed with the netlink error message
"Invalid argument". Per debug kernel trace, it is failed in
comparing the kind name in tc_new_tfilter.
Log:
05-05 19:44:42.329 1073 2332 2332 W tc_new_tfilter:
Specified filter kind does not match existing one
Test: enable usb tethering and check the follows
$ adb shell tc filter show dev <upstream, downstream> ingress
filter protocol ipv6 pref 1 bpf chain 0
filter protocol ipv6 pref 1 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_upstream6_ether:[*fsobj]
direct-action not_in_hw id 3 tag 94ca9b12972fdea8
filter protocol ip pref 2 bpf chain 0
filter protocol ip pref 2 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_upstream4_ether:[*fsobj]
direct-action not_in_hw id 9 tag 992aa9bfd0503457
filter protocol ipv6 pref 1 bpf chain 0
filter protocol ipv6 pref 1 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_downstream6_rawip:[*fsobj]
direct-action not_in_hw id 4 tag 7fb60e556b8f3be7
filter protocol ip pref 2 bpf chain 0
filter protocol ip pref 2 bpf chain 0 handle 0x1
prog_offload_schedcls_tether_downstream4_rawip:[*fsobj]
direct-action not_in_hw id 6 tag e41426095404fb64
Change-Id: I471a2e34c626a3737cbd2754e4d1b3000bcf6ba6
This allows the coverage tests to manually trigger native coverage
collection, as a workaround for collection not being triggered
automatically by the coverage infrastructure.
Bug: 185202279
Test: atest TetheringCoverageTests
Change-Id: I619fc267cf1743dd2218e3dd42546b0d4e9da193
Some OEM may have special mobile data icon show up when non-default
(e.g. DUN) mobile connection connected even wifi is also connected.
So always connected DUN may let user hard to distinguish tethering
upstream in those OEM's devices. Also release unused mobile connection
may safe power.
This CL removes unnecessary code from selectPreferredUpstreamType.
In particular:
- When a DUN or HIPRI upstream is selected, calling
registerMobileNetworkRequest is unnecessary. A mobile
NetworkRequest is always registered unless a non-mobile upstream
is selected.
- When a non-mobile upstream is found, releasing the mobile
NetworkRequest is unnecessary in selectPreferredUpstreamType
because it will be done by chooseUpstreamType immediately after
selectPreferredUpstreamType returns.
- When no upstream is found and cellular upstream is not permitted,
it is not necessary to release the mobile NetworkRequest. When
cellular is not permitted, no such NetworkRequest will be filed
because registerMobileNetworkRequest checks with EntitlementManager
before actually requesting the network. If cellular becomes the
upstream and then later becomes not permitted because of an
entitlement failure, all tethering will be stopped by Settings.
Note: currently legacy upstream selection has two known bugs:
1. If mobile has higher priority than non-mobile network, mobile request
should never be released and always prefer use mobile. But in practice,
mobile request would be released when tethering select non-mobile network
as upstream.
2. If mobile has higher priority than wifi network and default network
is wifi but mobile is still connected, tethering would choose mobile as
upstream because it has higher priority. Mobile disconnecting may not
trigger tethering to switch its upstream to wifi because currnetly
tethering rely on CONNECTIVITY_ACTION broadcast to handle upstream
disconnect.
Bug: 173068192
Test: atest TetheringTests
Change-Id: Id5df58af830cc534ecd79041ddf8a04171047e9b
This is useful for OEMs that want to use RNDIS or NCM as a
local-only link that is directly connected to some other host.
This can be used to implement USB tethering using NCM, which
currently only supports local-only mode.
Bug: 175090447
Test: TetheringIntegrationTests:EthernetTetheringTest#testLocalOnlyTethering
Change-Id: I0ffaa46e4640e5b235340a15d25909106ceb0c07
When a 464xlat upstream disconnects, onLinkPropertiesChanged is
called after onLost. This breaks an UpstreamNetworkMonitor
assumption that no callback will ever arrive after onLost.
Bug: 173068192
Fix: 185117377
Test: new unit test
Change-Id: I4ff1eca6d5ed1680ff716c71b683891c8a0e5a77
Add separate testing for unicast and multicast RAs.
Make the test more realistic by:
- Enabling forwarding. This ensures that the daemon actually
receives the RS.
- Adding a link-local route. This ensures that the daemon is
actually able to send a unicast response.
Bug: 154669942
Test: atest TetheringPrivilegedTests
Change-Id: Ibb1f51b5b1871657d7feff39335d3c71586cf64f
If a tc ebpf program writes into a packet using direct packet access
then the packet will automatically be uncloned and pulled by
additional prologue inserted by the kernel itself. See
tc_cls_act_prologue() & bpf_unclone_prologue() in kernel sources
(this is how the clat ebpf program works, which does DPA writes).
However in the forwarding programs we only *read* from the packets
using direct packet access, but never write. All writes happen via
kernel bpf helpers (this is mostly an implementation detail: since
we need to use helpers for checksum updates, I decided to also use
checksums for the writes themselves). As such the insert 'automatic
unclone/pull' logic doesn't trigger.
It is thus possible (it depends on the skb layout delivered by the
nic driver) for 0 bytes of the packet to be accessible for read
using direct packet access. We thus need to explicitly try to pull
in the header of the packet so that we can inspect it.
In most cases (on most drivers for most packet types) this will
end up being a no-op (because the headers will already be in
the linear portion of the skb). But on some drivers for some
packet types it ends up mattering.
Test: TreeHugger, makes icmpv6 tether forwarding work on bramble
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: I4b07e57728ce544ffb908527ea11ecc315e5acec
When forwarding is on, DadProxyTest fails because forwarding
disables optimistic addresses. This results in the DAD proxy
getting EADDRNOTAVAIL.
Forwarding is on quite often on real hardware because many
solutions for wifi calling use forwarding.
Fix the test to retry after two seconds if the packet is not
forwarded on the first attempt.
It would also be possible to make this work more reliably in the
test by simply disabling DAD or disabling forwarding. However,
because DAD does happen in real usage (downstream interfaces
always disable DAD, but upstream interfaces don't), that seems
risky. For example, if the test disabled DAD, it would not catch
bugs where the DAD proxy crashed or stopped forwarding if it got
EADDRNOTAVAIL.
Test: atest TetheringPrivilegedTests on coral, which has forwarding on
Change-Id: I58280ef7c0e40371cd770ead4c8baa7190c288fd
Current upstream selection code suffers from a race where if the
CONNECTIVITY_ACTION broadcast for a given network switch is
received and processed before the NetworkCallbacks for that
network switch, upstream selection just re-selects the same
upstream it had before. The incorrect upstream persists until
another CONNECTIVITY_ACTION is received.
Fix this by defining a new EVENT_DEFAULT_SWITCHED message code
communicated from UpstreamNetworkMonitor to Tethering, and send
that whenever the default network switches.
The message is sent in onLinkPropertiesChanged, because the
tethering code stores all information about networks in an
UpstreamNetworkState structure that contains Network,
LinkProperties and NetworkCapabilities. When a network switch
occurs, onLinkPropertiesChanged always follows onAvailable and
onCapabilitiesChanged, and thus marks the first point in time
when all the information is available.
This CL tries not to change existing codepaths too much, but
it does move the update of mDefaultInternetNetwork from
onCapabilitiesChanged to onLinkPropertiesChanged. This should
not be a problem because the only thing that reads
mDefaultInternetNetwork is getCurrentPreferredUpstream, which,
in the case of a default network switch, will be run by the
onLinkPropertiesChanged which will immediately follow.
Bug: 173068192
Test: changes to existing unit tests show bug is fixed
Change-Id: Ic9196bc92892811b25bda463ffd839ee5c19d294
In the current tethering code, upstream selection is only
triggered by CONNECTIVITY_ACTION. But in automatic mode, the
upstream network is selected by listening to a NetworkCallback
that tracks the default network.
This causes a race where if the CONNECTIVITY_ACTION for a network
switch is received and processed before the callbacks for that
network switch, upstream selection just re-selects the upstream
currently in use.
Make it possible to test this by giving TestConnectivityManager
the ability to choose the ordering between NetworkCallbacks and
CONNECTIVITY_ACTION, and to run an arbitrary Runnable between
calling one and calling the other. TetheringTest passes a
Runnable that calls mLooper.dispatchAll(), which ensures that
the tethering code fully processes the first set of information
it receives (either the broadcast (or the callbacks) before
receiving any more information.
Add test coverage to testAutomaticUpstreamSelection that
exercises various orderings, and make the test pass by expecting
the buggy behaviour of the current code.
An upcoming CL will fix the bug and update the tests.
Bug: 173068192
Test: test-only change
Change-Id: I7805444dcf59f6d5f8517fbcf2f2b1641783d50b
This is needed for forwarding to work, so it should be dumped.
New output:
Forwarding rules:
29(29) -> 14(rmnet2) 86dd 00:00:00:00:00:00 00:00:00:00:00:00
[ap_br_wlan2]: iif(iface) oif(iface) v6addr srcmac dstmac
14(rmnet2) 29(ap_br_wlan2) 2001:240:2423:13fa:3c21:e35a:6a59:ff8a da:17:fd:70:3d:14 26:5b:b2:ee:bc:ba
IPv4: [inDstMac] iif(iface) src -> nat -> dst
[da:17:fd:70:3d:14] 29(29) 192.168.222.151:39208 -> 14(rmnet2) 100.102.14.231:39208 -> 172.217.175.3:80
[da:17:fd:70:3d:14] 29(29) 192.168.222.151:47386 -> 14(rmnet2) 100.102.14.231:47386 -> 216.58.197.196:443
Also add a call to getHostAddress() to remove the / on IPv6
forwarding rules.
Test: manual
Change-Id: I347ea5a3fd88c51f1fae0c76c75dfa30c68a55ad
Add a unit test to verify that BPF coordinator access downstream4
and upstream4 map while the conntrack event was received.
Verify shim API for IPv4:
- tetherOffloadRuleAdd
- tetherOffloadRuleRemove
- tetherOffloadGetAndClearStats
- tetherOffloadSetInterfaceQuota
- isAnyIpv4RuleOnUpstream
Test: atest TetheringCoverageTests
Change-Id: Ia57f07990d8750fd6ff67d7f4a18aa610336024a
Required because XDP offload needs input interface mac address
to be a part of the key. The mac address is used for checking
packets which are received from exceped input interface.
Test: atest TetheringCoverageTests, TetheringPrivilegedTests
Change-Id: Ied159454b516c0d70efe0a85744d1bb606892f2d
Currently, BpfCoordinator only sets the data limit on a given
upstream whenever the first IPv6 rule is created on that
upstream, and clears it whenever the last rule is deleted on that
upstream. It never does this when adding or removing IPv4 rules.
This makes it impossible to offload traffic on IPv4-only
networks.
Fix this by setting the limit when IPv4 rules are created or
deleted as well.
Test: atest TetheringCoverageTests
Manual tests as the follows
Test {add, clear} limit with IPv6-only network [OK]
Test {add} limit with IPv4-only upstream [OK]
TODO:
Test {clear} limit with IPv4-only network. blocked by aosp/1579873
because the IPv4 rules have never deleted.
Change-Id: I5a29bdd18e564318759f617023163e23fb5a3ed0
