It is more probable that end user always use same TV to connect.
Hence make the action safe property persist, so that it is
persistent across reboot
Also, change property to sys. from hw. so that hwc can write
Change-Id: I5a77156012d121e28d1adbadb9162fcdf7ca3edd
CRs-fixed: 472431
Add support for tracking the mode in which DMA is being used in overlay.
Remove unnecessary tracking variables, and their set,reset inconsistency.
With such varibles in hwc, it still leads to overlay giving out DMA pipes.
Make overlay as the single tracking place.
Change-Id: Ib949f3d0ef5918ef323c81cb1768b68a68c83da4
Log a frame-by-frame succession of HWComposer layers' data and write
their buffers, if any, into raw or png files based on system property
values.
Change-Id: Icceccf5fff5ab4d78dbc6c28c11210b8837ddfd9
Older mdp rotator does 90 first and flip next,
forcing HAL to swap flips, in presence of 90.
Newer mdp does flip first and 90 next, owing to DMA pipe.
(Also similar to GPU flip handling). So we can pass flips as-is.
Change-Id: I379509a07e45966262005666e7727e7923079d3a
With this change we are moving MDP composition from all-or-nothing
implementation to mixed mode implementation where layers can
partially be composited through MDP and while rest of the layers are
composed / cached in framebuffer.
- Mixed mode design is based on layer caching
- Mixed mode path is configured only when non-bypassing
layers are cached.
- Never allow mixed mode when FB needs to be udpated.
- If we cannot bypass all MDP comp marked layers, bail
out completely.
Change-Id: Ie08f39db07e032b537f042d0d2bfe772ebfed049
In some cases it is seen that we receive a NULL handle on
suspend/resume. One such test case is open browser, suspend
device, resume device, unlock screen. Since we rely on the handle
to get the format, make sure it is not null.
Change-Id: Ia476887a831df33a50b2939a46c143b9c207ea9b
Set z-order of video layer to 0 and framebuffer to 1 in case
of video overlay composition so that the blending takes effect.
Also set is_fg OFF for framebuffer.
Change-Id: I05f930074d265d690f29a1003b7c28077df89bbf
CRs-fixed: 458180
copybit blit may not be effective if data for composition
is high. Add configurable threshold support beyond which
we can avoid copybit blit. set default threshold value to
2 times of fb resolution.
CRs-fixed: 462450
Change-Id: I0ee77ea1d761dc370d82ade1724caefbecfa01f5
Do not allow mdp composition when any layer format has alpha channel
and needs scaling as the VG pipes are not supporting alpha downscaling.
In few scenarios, at the beginning/ending of animations Surface Flinger
passes few frames with flag HWC_BLENDING_NONE though it has Alpha.
When such layer passed to VG piple and if needs scaling , it results in
flicker. Hence, just checking for HWC_BLENDING_NONE is not enough.
Change-Id: I70fdfe4547df6fe7b2771ed8042f43aa4e07a71d
CRs-fixed: 462508
The calculations made for the right mixer was not correct,
fixed it for both FBUpdate and video usecases
Change-Id: Iff2c296321bce14b776731528fff6f1d255d829a
This change adds support to MDP composition to use DMA pipes when
layer scaling is not needed. Also makes sure not to invoke
MDP rotator when DMA pipes are configured since MDP rotator will
expect both the DMA pipes to available for performing rotation.
In such cases, we let the first frame of rotated video frame to
fall back to FB.
Change-Id: I3c3697dd2713ce9b86ba1e23192ec5841abd25ec
Slightly different version went on jb_2.5 which caused a
mismatch. Escaped testing because FB HAL is not used.
Change-Id: Ia7ee2fb80bf937499d372383641f71530dc1feca
This patch removes the usage of the framebuffer HAL which is
deprecated in JB MR1 onwards. The code is left for compatibility
such as conformance tests but it is unused for normal display
usage.
Change-Id: If98133bdaa759cdc41d4503ff695b225ee43cb6f
Conflicts:
libhwcomposer/hwc_utils.cpp
--Fix MDP_SOURCE_ROTATED_90 removal.
Since mdp flags are updated fresh each round,
this flag should not be removed if there is no 90.
If pre-rotation is used, this flag is set by hwc and removed here.
(Affects anything having a 90 component in transform)
--Provide MDP adjusted transform to prerotation calcs.
Clients on Android don't switch flips if 90 component is present,
but expect the output to be that way. (camera)
We do it in HAL and then calculate final crop for MDP.
(Affects anything using 90 + Just 1 flip i.e camera)
--Pass 0 transform to MDP even for flips, since we
prerotate if there is 90 with flips or use MDP to flip via flags,
so no need to flip transform calcs.
(Affects anything using just flips).
Change-Id: I115a82ee4558794db0b6b641710494b9007d6f54
Userspace can retrieve MDP revision number and number of different
types of MDP pipes (RGB,VG,DMA) information from driver. Add target
specific flag as previous MDP versions do not provide this support.
- Make use of this information while maintaining PipeBook.
- Move PipeBook related functions from overlay utils to PipeBook.
Change-Id: I46578bb27e515c4b9525d90b6619c11d7749914f
-Add support for Video via overlay on 4k2k external panel.
-Add support for rotating videos on 4k2k panels. We use
pre-rotation in hwc to rotate a video into a single buffer,
irrespective of panel size. Then this buffer is fed to MDP.
Rotator objects are managed by the new RotMgr.
-Cleaup mdpcomp and overlay.
Change-Id: Ifb08534747e8e18b6c58dd8a3e1a9947409100f1
Sometimes vsync would not be disabled before the display is
blanked.
This was due to the vsync disable ioctl being kicked off in a
thread different from the event control which surfaceflinger
called. So, while the calls from surfaceflinger are in order, the
order of execution wasn't always the same. Hence, making sure
ioctls are called in the same context to ensure order.
Also
- Make blanking/unblanking logs show the operation as a string.
- Add a debug property to dump vsync timestamps (needs framework
reboot)
- Remove a log which showed delay in reading vsync. This log was
unreliable when vsync is disabled and we're still reading from
the sysfs node.
Change-Id: Ibec04e9ffebd0ac6e1d32b7031e3668abd9390ff
CRs-fixed: 443113
The earlier copybit solution involved blitting directly into
the SurfaceFlinger's framebuffer target. That solution involved
unnecessary framework changes and caused issues when the
framebuffer was being written to both by GL and copybit.
Update hwc_copybit to use our own buffers for this purpose.
We also make sure we display only the region we're interested in
so that unnecessary artifacts from previous blits do not show up
on the display. This way, we can avoid clearing the intermediate
buffers every frame.
Change-Id: I713b3fc606e0768444c621af76853ece41964da1
This patch:
-Implements MDP composition for higher resolution
panels of width more than 2k.
-Adds DMA pipe support for high res. MDP composition
Change-Id: Ib7b1f822e3600eca81521294fedfe05e948b65c3
Close acquireFenceFds always even in case of failures if a layer is either
OVERLAY or FRAMEBUFFER_TARGET to prevent leaks in case of failures.
The framework is *not* responsible for closing acquire fds, for layers
marked as above two.
Change-Id: Ia6c751d3ec25f196f5503120894fc6cc692b9d25
This change allows virtual display to be composed
by HWC for supporting Google WFD App + QCOM WFD stack.
Change-Id: If8892230256e72fa34e3fb5ae715c3ad8cbd5b64
Add a client interface which interfaces with hwc.
qservice upon receiving IPC, provides a callback notification to the qclient
which does appropriate stuff in hwc.
In future, qservice can safely be even made a separate process with no changes
to exisiting code. This was not true earlier owing to the hwc pointer held by
qservice forcing it to be in the same process that hwc is in.
CRs-fixed: 452977
Change-Id: I05838c213f5d4606a6573693de1bacbc5876107e
When YUV layers are marked for SKIP, it needs to be composed by
SurfaceFlinger. No need for tracking them in HWC
Change-Id: I4c8ca9710b709b9df9dcb6867681387b7507e14c
- Read scan_info sys file node to check if TV underscans
- Apply action safe parameters to avoid overscan on ext display
- Store action safe width and height ratio using system property
- Use these to calculate the destination position on the ext display
- Remove unsed ActionSafe Class
Change-Id: Id27e6fa20966fb13fc16aa7e237cacce8caeb642
CRs-fixed: 447367
This change introduces the following changes:
- Frames having 2 yuv layer can be bypassed
- if not handled by MDP comp, video path will not
handle any such frames and will be FB rendered
Change-Id: Id211dbc185608c482badbca00a2708fa6138a8e5
In Mdss, mSecureMode is never set, instead the secure content flag
has been set/unset on each layer buffer.
Change-Id: I3283533c11206e189ce70dbc84776b2cff3a909d
- Add CopybitEngine to hwc_context
- draw the layer on the HWC_FRAMEBUFFER_TARGET using
copybit(c2d) if it qualifies for C2D composition.
- use fence returned from the copybit during c2d
composition
Change-Id: I052da015cd031f7abd6411d83d7944c335caeff7
This change introduces hdmi pending state, where we allow
frames to fall back to FB, closing all MDP pipes.
Pipes could be used by primary (mixer 0) in which case moving
them to external (mixer 1) involves unsetting them and setting
them in the same round which is not recommended by the driver.
It will fall back to GPU till HDMI is configured on a connect
event.
CRs-Fixed: 430057
Change-Id: I4b6677883c499f6d15656c3578190be1115ee6b4
Restructure MDPComp class for 4kx2k displays.
Cleanup MDPComp class to remove unused stuff and formatting.
Add a MDPCompLowRes class for current functionality.
Add a hollow MDPCompHighRes class for future.
Change-Id: I343540e712d31ca907257a73b49567578f49d5f7
Add support for 4kx2k FB for primary and external panels.
Change class design to create appropriate version of FBUpdate on boot up based
on the panel resolution.
Change-Id: I216d815d9b81c610aa39e351f7b55736dfa48b43
Set debug.egl.swapinterval to zero to disable
fences with MDP composition enabling swap interval zero.
This is to measure performance only and will cause tearing.
CRs-fixed: 429343
Change-Id: I1460a02d568e69826800486a9a695d7a8953d4f8
Does a basic implementation of the dump function
called by SurfaceFlinger in dumpsys.
Further logs in different areas can be added later on
using the dumpsys_log utility.
Change-Id: I2194b4ed7f10947272b7b824ef802ce2ee3c8a48
MDP4 supports scaling with alpha, only in RGB pipes.
In some cases this scaling happened with video pipes.
We now fall back to GLES composition for layers that have
alpha and need scaling.
Change-Id: I084355bad1cdb17c7308077b56006c59e75d2042
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Bug: 7648647
