Screen fitting for out-of-bounds videos (with overlays) exists for primary
panel. Add this same support for external panels, so that GPU won't be needed
in panning use-cases.
Bug: 7313955
Change-Id: I274a821264d87098227b144752f4d0b89d342cd9
Signed-off-by: Iliyan Malchev <malchev@google.com>
MDP doesn't like out-of-screen-bounds parameters. So based on the position of
the layer, we adjust the portion of layer the MDP should pick.
However, this did not factor in orientation, so far. This patch does that and
allows panning to work in other orientations, without having to use GPU.
Bug: 7313955
Change-Id: Ice17ad144abcd60279c2ef9ad87fc617a1bd3621
Signed-off-by: Iliyan Malchev <malchev@google.com>
Cleanup overlay objects and close fds when external is disconnected. Without
this, the external does not come on when cable connected-disconnected multiple
times when device is in suspended state.
Bug: 7150885 (part of the fix)
Bug: 7295979
Bug: 7150885 (partial)
Change-Id: I1ae2ce7220b9928dde332ce3644dbe671d25c7e6
Signed-off-by: Iliyan Malchev <malchev@google.com>
* Read sysfs entries to get vsync timestamp from kernel.
* External display continues to use uevents for hotplug events
* A new thread, vsyncThread is created to read and send vsync
timestamps to HAL.
* Disable H/W VSYNC for MDP 5.x targets until kernel changes are
complete.
* Synchronization is needed to make sure read() is not called
by hwcVsyncThread when VSYNC is disabled.
Change-Id: Iab0a94a3cfce9142b8867859f2a7d9bcaecb0996
Acked-by: Neti Ravi Kumar <ravineti@codeaurora.org>
Bug: 7124159
--External disabled
--MDP comp coded but disabled.
--Videos via overlay, so that secure videos can work.
Change-Id: Ie48b264143d5e4237ab9724e28930e3f68ba49ee
Signed-off-by: Iliyan Malchev <malchev@google.com>
Add QService binder interface to enable communication
to display by the mediaserver for Securing/Unsecuring start and end
notifications.
Create separate lib for external.
Clear reserved field before applying format.
Change-Id: I463c9c6deac7587bd0c4e0b84513b5d0b5dd7e98
Secure content can not be displayed unless in an overlay. Since
getLayerStats marks all layers under the skip layer for framebuffer
composition, when there is a skip layer on top of protected content,
the protected content disappears since surfaceflinger doesn't draw
protected layers.
Acked-by: Amara Venkata Mastan Manoj Kumar <manojavm@codeaurora.org>
Change-Id: I59dd5dffad08dbf578baa459f5f4c726b6674c83
Draw sequence in hwc_set
--eglSwapBuffers
--wait for fb_post. Its ok to draw to External only at this point.
--draw to external | Parallel with PAN
--commit to external | Parallel with PAN
--wait for pan (happening in fb_post) to finish.
Call MSMFB_OVERLAY_SET ioctl only when params change.
These thing together ensure a correct sequence and should fix tearing and
stuttering, the latter assuming there are no other display pipeline delays.
Acked-by: Arun Kumar K.R <akumarkr@codeaurora.org>
Change-Id: Ibb0ad8485fa6b30dc6ac07ae8b25a760941c08ce
Also store the hwc_procs_t* into a dedicated field instead of one of
the hwc_composer_device_1_t::reserved_procs slots, which are supposed
to be NULL so the structure can be extended without breaking backwards
binary compatibility.
Change-Id: I11e6bc713958d854aba418242caa749cbcb21f1d
Add support for different types of external-only layers
EXTERNAL_ONLY: General purpose
EXTERNAL_BLOCK: Blocks the display of other ext-only layers
EXTERNAL_CC: Used for closed captions with videos.
Change-Id: I9cc7b9a1dbf1085194725474d6a4d1094e27a0c8
Acked-by: Saurabh Shah <saurshah@codeaurora.org>
This change
1) implements MDP Composition upto 3 layers
2) adds invalidator support to fall back to FB
composition during idle screen condition.
Change-Id: I55f27321fd0df096b353d66aaad1cc720cd4b84b
Acked-by: Jeykumar Sankaran <jsanka@codeaurora.org>
* Use the vsync uevents from the kernel to start
surfaceflinger composition.
* This patch also does some code cleanup
- Move copybit specific functions to copybit files.
- Cleanup verbose logging.
Change-Id: I36936e4b0a082cfb0347d8ee7d2bc936e01808e6
This change add support for copybit composition in display HAL
for MDP3 targets.
Change-Id: I9bc8e40f624b0760f4faa223cb03a13695611bb3
Acked-by: Sravan Kumar D.V.N <sravank1@codeaurora.org>
* Fix memory leak during copying pipe objects.
* Remove unused / unnecessary code.
* setMemoryId API is merged with queueBuffer.
* setParameter API is setTransform now.
* Rotator upgraded to:
--Allow different rotator hardware types.
--Remove dependency on MDP code.
--Allocate memory only during first playback,
close when the associated pipe is closed.
* Have single commit implementation.
* Include new format types.
* Remove WAIT and CHANNEL enums and usage. Replace BypassPipe with
GenericPipe. Client expected to set alignments and parameters.
Add transform combination enums.
* Allow APIs to be called in any order. Do transform calcs in commit.
Move ext type setter and getter functions.
* Add calculations for 180 transform.
* Add secure session support in rotator
* Implement all rotations in terms of H flip, V flip and 90 rotation.
Change-Id: I34a9a2a0f1255b3467a0abbaa254d0b584e901ce
* Rename qcomui directory to qdutils
* Avoid inclusion of qcom_ui header
* Add class to get MDP version
* Add namespace for qdutils to prevent collison
Change-Id: I9a3f440e6b0fea1cfcc478ddca90af5df3bbb897
- Update the display HAL from Code Aurora Forum
- Add updated overlay library
- Enable HWC with basic video going through overlay
- Cleanup some files
Change-Id: I65c687c51be458cee71213c79e03eeda962d9086
