- Clients(SecureUI/WFD FW) will use this API to set status of the
Secondary display
- Status can be offline/pause/resume
- Secondary display will be hdmi/wfd, HWC will free up pipes for
these displays
Change-Id: I25d5e070b60c38daeb102349bed14bb6de0a5684
Add support for dynamically setting idle timeout values.
Move default idle timeout setting to IdleInvalidator.
Fix static var naming, handle errors from IdleInvalidator in hwc.
Property debug.hwc.idletime is removed with this change.
Example:
1) Set idle timeout to 100ms
adb shell service call display.qservice 16 i32 100
16 is the code for SET_IDLE_TIMEOUT, 100 is time in ms
2) Disable idle timeout
adb shell service call display.qservice 16 i32 0
Change-Id: I60e15a3ac869b4e9f4015b3be50a35c90d00d404
Add pipe life-cycle logging including set, unset, commit.
Remove the older unused logging mechanism.
This is enabled via binder as:
$adb shell service call display.qservice 15 i32 4 i32 1
where 15 is DYNAMIC_DEBUG, 4 is for pipe lifecycle debugging and
1 is to enable
Change-Id: I6c02e24aa91135d4a6c67870b4c103546947da48
Provides a way to enable/disable dumping of virtual display
frames at runtime via binder. The dumping needs to be enabled
from a priviliged shell.
For example,
$ adb shell service call display.qservice 15 i32 3 i32 1
Here 15 is the integer code for DYNAMIC_DEBUG in IQService.h
The first parameter 3 is for DEBUG_VD
The second parameter 1 is to enable.
Change-Id: Idd62c5d9ffa6e4eb7dec585984d145bc6a421336
Provides a way to enable/disable logs at runtime via binder.
The logs need to be enabled from a priviliged shell.
For example,
$ adb shell service call display.qservice 15 i32 0 i32 1
Here 15 is the integer code for DYNAMIC_DEBUG in IQService.h
The first parameter 0 is for DEBUG_ALL
The second parameter 1 is to enable.
Hence, this command enables all debug logs.
Another example - this command enables vsync logging
$ adb shell service call display.qservice 15 i32 2 i32 1
Change-Id: I13d5f397d9d03f0ac6a14d3a3c9098ed59fc62fd
Define binder interface setViewFrame to set view frame information
of a display by surfaceflinger when projection for that display
changes.
Change-Id: If737b51ae0f04303a1a29c91a9703f64354b61fb
Use change in HWC_GEOMETRY_CHANGED flag appropriately to avoid
redundant and unintentional overwrites of DisplayFrame values,
which may result fall back to GPU.
Change-Id: Ifb0f8dc5d356c965b6e80644f32392c460fb1ae7
* Provide a binder interface call for wfd module
to inform display about the start/stop/pause/resume
of wfd session.
* This is needed for wfd-hdmi synchronization in
case of v4l2 wfd solution. If hdmi is plugged
in during v4l2 wfd session, display-hal waits in
uevent thread for wfd teardown notification from
wfd module, before going ahead with configuring
external display.
* For VDS WFD solution, display-hal waits in uevent
thread for wfd-teardown to be signalled from
the composition thread.
Change-Id: I9514cb5bc7ff81de0b5dd4cdf66d8286a64ba094
Vpuclient is the client side for VFM in hwc. It follows the
similar pattern of prepare and draw. It has 2 step prepare
including: setVpuSession and prepare. The setVpuSession function
passes all the layers from the SF list to VFM, which marks
the layers that it can support. After this, the layer
allocation/configuration is done, and finally in prepare the
allocated pipes are passed down to VFM. The draw function
passes the handle to the VFM to draw the video layer.
Change-Id: I5d8795de35ed98716f7fa4cd48506b488cb3cb5d
- Client can call this when it want to pause/resume wfd
- Calling this will make sure after pause, black screen
is shown on the sink
- Currently used by the SecureDisplay module
Change-Id: If618edf76a82abe49fb676d3845ca1f1d5a8bf25
- This binder interface can be used by clients to know the
active visible region for a display(pri/ext/virt)
- When external orientation is used, return the destFrame of
the FrameBuffer layer, as its the viewFrame
Change-Id: I7cfd149c76c16b9a3031103c89b1932d44bcbecd
This API is meant for system level users that need to get/set
various display attributes that are normally not available via
the regular Android framework channels.
Initially the APIs exposed are to check HDMI status, get display
attributes and set HSIC data.
Only physically connected displays are supported for now.
Change-Id: Ia783ce2ab0c4599a54c992171e01e2f0504550dc
The current binder implementation is inflexible when it comes to
adding new input/output parameters. It also needs a lot of
boilerplate code written when adding a simple enable/disable type
command.
Instead, let clients specify the parcels they want to pass and
unparcel them at the end points only.
Please note that it is assumed that all commands coming in
need the same permission checks. If this is no longer the case,
some commands need to be split out on the receiver end in
IQService.cpp.
This change also simplifies the code end clients need to write.
They should be able to include QServiceUtils and call a single
function to set the binder up and make the call.
Change-Id: I4db66f2427ecf16d7a6264462ae85815217a16b1
Stub implementation of VPU in HWC.
This commit passes through binder calls from HWC
to the VPU library. It also has stub prepare/draw calls
in the VPU client object which can be used to configure
VPU in the composition cycle.
Change-Id: I2606f2884e870448d29ef26e02faac92e157e2c6
- In Buffer mirror mode, the output on the external should be rotated
based on the primary orientation.
- this is used for the side sync feature.
- buffermirrormode has higher precedence over external orientation
- Add binder interface to enable/disable buffermirror mode
Change-Id: Ibea0af9627d69b4d42453adc868b113d82613437
Remove the unnecessary blank lock, mdp comp lock, secure lock.
Rename the ext lock to a more appropriate draw lock.
The mdp comp lock is at an incorrect place and causes unwanted
objects to show up in dumpsys, since configDone hasnt cleaned
them up yet.
dump(), blank(), draw() should all acquire a common lock.
draw() includes prepare() and set().
Change-Id: I595547dd5a393a8af6cd8c9297d50793b715e658
Define and Use mSecureLock in composition and binder
thread. This is to ensure both variables mSecureMode
and mSecuring are updated in binder thread without
any context switch to composition thread
Change-Id: Ibd701bd3363515e2f7e8a9711bbc5b66053cfa03
- In Buffer mirror mode, the output on the external should be rotated
based on the primary orientation.
- this is used for the side sync feature.
- buffermirrormode has higher precedence over external orientation
- Add binder interface to enable/disable buffermirror mode
Change-Id: I1768dbfac239ae663927358ca9b8e5510b683385
- The required orientation on External can be set using the
properyt sys.ext_orientation.
- Values can be HAL_TRANSFORM_ROT_90, HAL_TRANSFORM_ROT_270
- According to the value set, the FB_TARGET for External will
be rotated and positioned as per aspect ratio on Ext
- For YUV(video layer) it just calculates the position, as the
rotation should be the source orientation
- This feature is supported only for low resolution panel.
Change-Id: I3d532ee0cb8dca3c37869537b55cd8044fd9047e
Subscribing to mediaplayer death on bootup delays
display startup because it depends on mediaplayer startup.
Defer until later.
Change-Id: Id73e90e5cc8581d8e2359d7c7effee1b65de488b
DSI command mode panels do not need to be refreshed on each
vsync. Due to one frame latency in CABL LUT calculation, when CABL is
enabled for DSI command mode panels, the LUT doesnt get updated for last
frame. Triggering an extra update for DSI command mode panels fixes it.
Change-Id: I7a22e338609430746dda4d3081ff199109a95035
Add support to get notified of media player death.
This is useful in reseting secure sessions initiated by mediaserver.
Change-Id: I215b5b552a0874c86a07426cd7d16ed48f307b5d
Add a client interface which interfaces with hwc.
qservice upon receiving IPC, provides a callback notification to the qclient
which does appropriate stuff in hwc.
In future, qservice can safely be even made a separate process with no changes
to exisiting code. This was not true earlier owing to the hwc pointer held by
qservice forcing it to be in the same process that hwc is in.
CRs-fixed: 452977
Change-Id: I05838c213f5d4606a6573693de1bacbc5876107e
