- This binder interface can be used by clients to know the
active visible region for a display(pri/ext/virt)
- When external orientation is used, return the destFrame of
the FrameBuffer layer, as its the viewFrame
Change-Id: I7cfd149c76c16b9a3031103c89b1932d44bcbecd
This API is meant for system level users that need to get/set
various display attributes that are normally not available via
the regular Android framework channels.
Initially the APIs exposed are to check HDMI status, get display
attributes and set HSIC data.
Only physically connected displays are supported for now.
Change-Id: Ia783ce2ab0c4599a54c992171e01e2f0504550dc
The current binder implementation is inflexible when it comes to
adding new input/output parameters. It also needs a lot of
boilerplate code written when adding a simple enable/disable type
command.
Instead, let clients specify the parcels they want to pass and
unparcel them at the end points only.
Please note that it is assumed that all commands coming in
need the same permission checks. If this is no longer the case,
some commands need to be split out on the receiver end in
IQService.cpp.
This change also simplifies the code end clients need to write.
They should be able to include QServiceUtils and call a single
function to set the binder up and make the call.
Change-Id: I4db66f2427ecf16d7a6264462ae85815217a16b1
Stub implementation of VPU in HWC.
This commit passes through binder calls from HWC
to the VPU library. It also has stub prepare/draw calls
in the VPU client object which can be used to configure
VPU in the composition cycle.
Change-Id: I2606f2884e870448d29ef26e02faac92e157e2c6
- In Buffer mirror mode, the output on the external should be rotated
based on the primary orientation.
- this is used for the side sync feature.
- buffermirrormode has higher precedence over external orientation
- Add binder interface to enable/disable buffermirror mode
Change-Id: Ibea0af9627d69b4d42453adc868b113d82613437
Remove the unnecessary blank lock, mdp comp lock, secure lock.
Rename the ext lock to a more appropriate draw lock.
The mdp comp lock is at an incorrect place and causes unwanted
objects to show up in dumpsys, since configDone hasnt cleaned
them up yet.
dump(), blank(), draw() should all acquire a common lock.
draw() includes prepare() and set().
Change-Id: I595547dd5a393a8af6cd8c9297d50793b715e658
Define and Use mSecureLock in composition and binder
thread. This is to ensure both variables mSecureMode
and mSecuring are updated in binder thread without
any context switch to composition thread
Change-Id: Ibd701bd3363515e2f7e8a9711bbc5b66053cfa03
- In Buffer mirror mode, the output on the external should be rotated
based on the primary orientation.
- this is used for the side sync feature.
- buffermirrormode has higher precedence over external orientation
- Add binder interface to enable/disable buffermirror mode
Change-Id: I1768dbfac239ae663927358ca9b8e5510b683385
- The required orientation on External can be set using the
properyt sys.ext_orientation.
- Values can be HAL_TRANSFORM_ROT_90, HAL_TRANSFORM_ROT_270
- According to the value set, the FB_TARGET for External will
be rotated and positioned as per aspect ratio on Ext
- For YUV(video layer) it just calculates the position, as the
rotation should be the source orientation
- This feature is supported only for low resolution panel.
Change-Id: I3d532ee0cb8dca3c37869537b55cd8044fd9047e
Subscribing to mediaplayer death on bootup delays
display startup because it depends on mediaplayer startup.
Defer until later.
Change-Id: Id73e90e5cc8581d8e2359d7c7effee1b65de488b
DSI command mode panels do not need to be refreshed on each
vsync. Due to one frame latency in CABL LUT calculation, when CABL is
enabled for DSI command mode panels, the LUT doesnt get updated for last
frame. Triggering an extra update for DSI command mode panels fixes it.
Change-Id: I7a22e338609430746dda4d3081ff199109a95035
Add support to get notified of media player death.
This is useful in reseting secure sessions initiated by mediaserver.
Change-Id: I215b5b552a0874c86a07426cd7d16ed48f307b5d
Add a client interface which interfaces with hwc.
qservice upon receiving IPC, provides a callback notification to the qclient
which does appropriate stuff in hwc.
In future, qservice can safely be even made a separate process with no changes
to exisiting code. This was not true earlier owing to the hwc pointer held by
qservice forcing it to be in the same process that hwc is in.
CRs-fixed: 452977
Change-Id: I05838c213f5d4606a6573693de1bacbc5876107e
