1. In PTOR feature, offset for the second overlap layer on render
buffer, depends on stride calculated by gralloc for RGBA (4 bpp).
2. If mCopyBit object exists for external, we need setReleaseFd()
Change-Id: I74e365def2a6e540b2f2ba2b294b6b1e00e0ea96
- Consider two smallest layers for PTOR feature which uses MDP comp.
- These two layers are rendered on a buffer and are queued to MDP
to acheive full MDP Composition
- This helps to acheive performance enhancement
Change-Id: I43d9306ff19cd2d7a410c885316523965a44cbd4
MDP bandwidth limitations can be avoided, if the overlapping region
covered by the smallest layer at a higher z-order, can be composed
on a render buffer using Copybit, and then it can be queued to MDP
along with other layers. It helps to improve performace by avoiding
GPU Composition in use cases like Home Screen pan. To enable this
feature, set system prop "persist.hwc.ptor.enable" to "true" or '1'
and enable Copybit HAL compilation.
Change-Id: Ib719d3dd42477837519518cc427f1b95356c28f7
In display list if one layer has same parameters
as framebuffer on index '0'. Use this layer
as FB and blit other layer(s) on top of it.
Change-Id: If38712781f24a2e27686d2b370643f51a9b05358
If the display list contains single layer and that layer
has same properties as Frame Buffer, avoid BLIT on Frame buffer
and pass it directly to display.
Change-Id: I24decaca4788432a55b550caa2a1354a670cd6fa
Conditionally compile layer's dirtyRect under QCOM_BSP in the copybit
file to prevent breaking builds that don't have this member in
headers.
Change-Id: I1669c5eefd1f48e45625797ef1508b5a6f23e6b1
We brings all swap rect level checks in HAL from surfaceflinger
for MDP3.
swap rect kicks in case of
1 Only one layer is updating.
2 No overlaypping layers.
3.Both src and dst has same value.(no scaling)
4.No video layer
Change-Id: I881958994e80b53d4969beaaf51518b727a8de78
Color layer always has zero transform because framework uses the
transform member of hwc layer to pass the color value to HAL.
Change-Id: I79fe204c558d1b6e1dd69ba635ba0bd87140b1b1
We are dividing (in downscaling case )the src rect value
to get intermediate value of dst. And due to rounding we
may not get exact ratio of src and tmp dst in kernel or
else where.Hence using ceil value.
CRs-Fixed: 618847
Change-Id: I8b95c3e00e83ff986d95e063d5927a3c57a13ff6
Remove all klockwork warnings and errors for libgralloc,
libhwcomposer, liboverlay, libqdutils, libqservice, libvirtual,
libexternal libraries to avoid buffer overflow and memory leaks.
Change-Id: I078143bcbcf5e4b342156bd8305a644566f7cc4b
It's better to check the source/dst crop width and height
for null and -ve value, may cause float exception.
CRs-Fixed: 596099
Change-Id: I34881cf37a99fb52be6429e27deba4ac12ed2474
8x10 has a product line that is suppose to use 256MB. The
intermediate buffers allocated are not needed when we can
compose onto fb frame.
Change-Id: I13fd2deb328a3ef4b6738cfe7030fe67ea7bd6c6
At 90/270 degree rotations, if there is vertical or horizontal flip in
layer transform, it is wrongly interpreted by display HAL due to wrong
check. So Copybit destination rectangle width & height are not swapped
which leads to unwanted out-of-range scaling.
Change-Id: Ib917b907d1284b91b7d6c25038050bbcb503a792
1. For Color layer, set zero transform value on COPYBIT_TRANSFORM
otherwise it causes MDP IOMMU page fault at 90/270 degree rotation.
2. Color layer is part of Copybit context list, so no need to call
msm_copybit() explicitly for it, that will be called during flush.
Change-Id: I4421b4bddfeca56b0ad8534d921c3d743a7d92bb
For MDP3 we cannot support scaling more/less then 4 times. Copybit
will use intermediate buffer to run scaling operation between 4
and 16, by going through MDP3 twice. But will not continue to do
so for scaling factors greater than 16 because operation takes too
long. It is in this case that we will fallback to gpu composition.
Change-Id: I99c05f6c70307823d0497cc8f9469bcc15178fea
For copybit cases we should clear wormhole region
rather than nonwormhole. Adding support to calculate
and clear the same.
Change-Id: Ie85d1b484174199e35f43ce95b30de1fac9c30b2
We are using the solid fill feature for
clearing the wormhole region using black
color.
Using the src buffer same as dst buffer to
avoid kernel checks for this use case.
Change-Id: Ia46aded9b067ece83c9df1f2c2cdd6b017fa64ea
Fixing array size to hold fence fd to count of render
buffers used in copybit and use it to store
fence of corresponding render buffer at the index.
Change-Id: Ic5e7f264c2a81ded2a0f61ef138e59a093b0023a
1. Color layer has a destination rectangle, RGBA color and plane
alpha. There is no gralloc buffer. Layer flag HWC_COLOR_FILL
denotes color layer. MDP BLIT happens via MDP_SOLID_FILL mode.
2. There is no color member in HWC layer, so RGBA color value is
passed via "tranform" member from framework to HAL.
3. Update HWC query to enable framework to query for Color layer
support in HAL, at run-time.
Change-Id: I2c698007c1689779fe86d549093bb5285432dc5f
Increment hwc version to 1.3.
Create and use a converter from float source crop to integers.
Change-Id: I5e185195c975b3a9434c5d9dce9ae4757ff98739
(cherry picked from commit 7e5637c850bcdbe21784ca3bfa9668870306adff)
Since mdp3 only has one dma pipe for overlay, which in the driver
is just a sw overlay, there is no need to force a overlay_set call
when HWC_GEOMETRY_CHANGED is set.
Also we are moving the wait for distination buffer fence to
wait inside the blit call for mdp3.
Change-Id: Id0aed8732dc49b1041d8174a5ff38703c8023abf
update the source video width and height set by the video decoder
for secure video smooth streaming usecase from metadata.
Change-Id: I73a3804d90557034604142481a232787dbc08f23
1.Framework notifies HAL with "HWC_FORMAT_RB_SWAP" layer flag to handle
a limitation where R and B components were swapped in Rendering phase.
2.Add "R/B swap" in hwc query to enable framework to query for support
in display HAL, at run-time.
Change-Id: I3b44d15b51b4f24939048fee9d1bac2b9009c97c
There was an error message that should just be a warning messages.
These error logs can cause automation testing to fail.
Change-Id: Ifb205d9f893012e9693628fcd24b2493d7ea51b8
A sw workaround was created in mdp3 so composition of layers with
rotation and roi that is not divisible by 16 is now possible to
be done by ppp.
Change-Id: Iada3707da1b85e58dad398b8271d7a26725e0d22
In case of non overlay target composition of the video
layer should be based on composition of UI layer as well.
(if taget has dynamic composition)
Change-Id: I6f312978f9168dddcf6ad0b1ac72f347b94d6920
CRs-fixed: 516630
