Add dumpsys information from writeback data structure.
Remove some unused fields, formatting to save space.
Change-Id: I808ce67aae16e27c3aa6d6db45983929b1386b69
1.Framework notifies HAL with "HWC_FORMAT_RB_SWAP" layer flag to handle
a limitation where R and B components were swapped in Rendering phase.
2.Add "R/B swap" in hwc query to enable framework to query for support
in display HAL, at run-time.
Change-Id: I3b44d15b51b4f24939048fee9d1bac2b9009c97c
Adding support for interleaved HAL_PIXEL_FORMAT_YCbCr_422_I and
HAL_PIXEL_FORMAT_YCrCb_422_I format in display HAL.
Change-Id: Ib87d9bf481c20bf6a92293dd04746719b1d928c1
The NV12 encodeable format is set for wifi displays but isn't
mapped to any MDP format. On B-Family targets the format is
equivalent to the venus yuv format.
Change-Id: I75e20c079e4b2e21decc39c29d9ed25953276df9
Implement sync for rotator.
If a buffer is rotated, it can be used by producer soon after
rotation (and it wont have to wait until vsync).
Mdp waits for the rotator buffer's release fence to signal
to start display.
Hwc waits for previous access to rotator buffer by MDP to finish
before using it
Change-Id: I5664806a17c44d58af62a2825ce454089fcd31cf
Add a BWC policy manager that decides if BWC needs to be disabled on
certain conditions.
These conditions are statically determined. BWC might get used and
still fail (or cause failure of subsequent pipe requests) if SMP
blocks are not sufficient.
Change-Id: I805738911a8da7dfc6232c133c74ef844c3af5b1
In extreme cases, when all pipes are used, the buffer is insufficient.
Reduce logging by striping off unnecessary bytes.
Change-Id: I5a6ffb9ff288e389eea4e9ca4ac850ed59d539ff
Add support for decimation on top of what MDP can downscale,
because decimation can have quality issues.
B-family MDP downscale of 1/4, plus decimation of 1/16 can let
us have a total downscale of 1/64.
Also decimate by 2 (min) if width is greater than what layer mixer
supports and is not handled by the client.
Change-Id: I3b7c4bf321c7561bd98206ad118f4ac1ee2879ae
Older mdp rotator does 90 first and flip next,
forcing HAL to swap flips, in presence of 90.
Newer mdp does flip first and 90 next, owing to DMA pipe.
(Also similar to GPU flip handling). So we can pass flips as-is.
Change-Id: I379509a07e45966262005666e7727e7923079d3a
This patch removes the usage of the framebuffer HAL which is
deprecated in JB MR1 onwards. The code is left for compatibility
such as conformance tests but it is unused for normal display
usage.
Change-Id: If98133bdaa759cdc41d4503ff695b225ee43cb6f
Conflicts:
libhwcomposer/hwc_utils.cpp
--Fix MDP_SOURCE_ROTATED_90 removal.
Since mdp flags are updated fresh each round,
this flag should not be removed if there is no 90.
If pre-rotation is used, this flag is set by hwc and removed here.
(Affects anything having a 90 component in transform)
--Provide MDP adjusted transform to prerotation calcs.
Clients on Android don't switch flips if 90 component is present,
but expect the output to be that way. (camera)
We do it in HAL and then calculate final crop for MDP.
(Affects anything using 90 + Just 1 flip i.e camera)
--Pass 0 transform to MDP even for flips, since we
prerotate if there is 90 with flips or use MDP to flip via flags,
so no need to flip transform calcs.
(Affects anything using just flips).
Change-Id: I115a82ee4558794db0b6b641710494b9007d6f54
Userspace can retrieve MDP revision number and number of different
types of MDP pipes (RGB,VG,DMA) information from driver. Add target
specific flag as previous MDP versions do not provide this support.
- Make use of this information while maintaining PipeBook.
- Move PipeBook related functions from overlay utils to PipeBook.
Change-Id: I46578bb27e515c4b9525d90b6619c11d7749914f
-Add support for Video via overlay on 4k2k external panel.
-Add support for rotating videos on 4k2k panels. We use
pre-rotation in hwc to rotate a video into a single buffer,
irrespective of panel size. Then this buffer is fed to MDP.
Rotator objects are managed by the new RotMgr.
-Cleaup mdpcomp and overlay.
Change-Id: Ifb08534747e8e18b6c58dd8a3e1a9947409100f1
Fix rotator output buffer size for mdp and mdss rotators.
Output size is based on rotated width & height.
Output format can be different than source format.
It could be same if using mdss rot or using fastyuv mode in mdp rot.
Deprecate the static mapping of rotator input and output formats.
Driver will be responsible for correctly populating the dest format that its
wishes to use.
Change-Id: I17352d6d460cac24eb97083aed38668929c66807
1. Due to alignment requirements on HAL_PIXEL_FORMAT_YV12 format,
rotator buffer size calculation needs to be performed based on
rotated width and height because buffer size can be different when
width & height are swapped due to 90 degree rotation.
2. Input and output color formats are same for MDSS Rotator.
Change-Id: I0a06ef9bb7bdceb951e7ab5160dac3e92a28bcda
CRs-Fixed: 451871
The MDSS driver takes care of this cleanup itself.
Also - MDSS driver does not export the mixer info ioctl
Change-Id: I3b736dfaaf355d71fe999b89027aced75ca1e248
Remove state based pipe handling and make pipes tracked dynamically.
Add the configStart, configDone, nextPipe availablePipes APIs.
Remove setState API.
-configStart marks all pipes available.
-configDone garbage-collects unused pipe objects.
-nextPipe returns the index of next available pipe and create a corresponding
pipe object if not present
-availablePipes returns total of "unallocated" pipes. (Pipes could be allocated
but unused)
Changes in hwc adapt to the new overlay APIs.
Compile out MDP comp.
Remove unused files in overlay and hwc.
Update licenses.
Conflicts:
libhwcomposer/hwc.cpp
libhwcomposer/hwc_utils.cpp
Bug: 7626586
Change-Id: Id8e56901d34e5dc0fd088260d05e3e46f68ff090
Signed-off-by: Saurabh Shah <saurshah@codeaurora.org>
Signed-off-by: Iliyan Malchev <malchev@google.com>
b/7147557
Add initOverlay() function to close all the opened pipes when
Surfaceflinger process gets killed.
Change-Id: I9c65a61c81f9c81198f1076d6cbd27933b164c05
Signed-off-by: Iliyan Malchev <malchev@google.com>
Android uses different alignments for YV12 buffers.
Hence, introduce a new format (MDP_Y_CR_CB_GH2V2) for
such buffers.
Acked-by: Amara Venkata Mastan Manoj Kumar <manojavm@codeaurora.org>
Change-Id: Id4d58dd77f22c9efb8ece9caa34a8717964bf58d
- MSMFB_OVERLAY_GET does not need to be called.
- MDSS always supports border fill.
Acked-by: Sushil Chauhan <sushilchauhan@codeaurora.org>
Change-Id: I04afc5119b2467eb026b11b6f558cca21b5454c7
Update format translation from HAL to MDP.
Add support for RGB_888, YCbCr_444_SP, YCrCb_444_SP formats.
Change-Id: Ic3f0ff96a8f587feaa82b5dd80fb52aa53199495
Acked-by: Saurabh Shah <saurshah@codeaurora.org>
* Fix memory leak during copying pipe objects.
* Remove unused / unnecessary code.
* setMemoryId API is merged with queueBuffer.
* setParameter API is setTransform now.
* Rotator upgraded to:
--Allow different rotator hardware types.
--Remove dependency on MDP code.
--Allocate memory only during first playback,
close when the associated pipe is closed.
* Have single commit implementation.
* Include new format types.
* Remove WAIT and CHANNEL enums and usage. Replace BypassPipe with
GenericPipe. Client expected to set alignments and parameters.
Add transform combination enums.
* Allow APIs to be called in any order. Do transform calcs in commit.
Move ext type setter and getter functions.
* Add calculations for 180 transform.
* Add secure session support in rotator
* Implement all rotations in terms of H flip, V flip and 90 rotation.
Change-Id: I34a9a2a0f1255b3467a0abbaa254d0b584e901ce
- Update the display HAL from Code Aurora Forum
- Add updated overlay library
- Enable HWC with basic video going through overlay
- Cleanup some files
Change-Id: I65c687c51be458cee71213c79e03eeda962d9086
