display: Add API to set qsync mode.

- Add qsync mode enums and API to set a mode.

Change-Id: I172f238ca16bdaf96e4cbfb0946c2c3fc32800fe
CRs-Fixed: 2497000
This commit is contained in:
Dileep Marchya
2019-07-25 16:44:21 +05:30
parent 6b24176e4e
commit a88187682c
2 changed files with 79 additions and 1 deletions

View File

@@ -0,0 +1,77 @@
/*
* Copyright (c) 2019 The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
package vendor.display.config@1.11;
import @1.10::IDisplayConfig;
interface IDisplayConfig extends @1.10::IDisplayConfig {
enum QsyncMode : int32_t {
/* Clear previous qsync mode if any */
NONE,
/*
* Enable qsync only for the next frame. Qsync mode will be
* automatically cleared after next frame has been composed.
* Subsequent frames will not be affected.
*/
WAIT_FOR_FENCES_ONE_FRAME,
/*
* Enable qsync for every frame from next cycle onwards. Vsync timelines
* will be extended only if a frame has been committed to HWC i.e. if
* HWC does not receive frames from client, vsync will be triggered at
* normal intervals. This is similar to setting qsync mode as
* WAIT_FOR_FENCES_ONE_FRAME with every commit.
*/
WAIT_FOR_FENCES_EACH_FRAME,
/*
* Enable qsync for every vsync interrupt from next cycle onwards.
* Vsync timelines will be extended to maximum stretch possible in an
* anticipation that a frame will be commited shortly. If frames are
* not commited, final frame rate will eventually drop to lowest
* possible frame rate.
*/
WAIT_FOR_COMMIT_EACH_FRAME,
};
/*
* Set the desired qsync mode which will ideally take effect from next
* composition cycle. Mode change may take longer than one cycle if there
* is a conflict with current operation mode.
*
* @param disp_id display id.
* @param mode desired qsync mode.
*
* @return error is NONE upon success.
*/
@callflow(next="*")
setQsyncMode(uint32_t disp_id, QsyncMode mode) generates (int32_t error);
};

View File

@@ -47,3 +47,4 @@ a34b984a4eee8b76a123390002843f050288a92f0f0c6b8d576930f738858f4c vendor.display.
fd36f8dbe80403d93f0e94651ae4efa1aa22053351e7783f5d99457cff9dbacc vendor.display.config@1.9::IDisplayConfig
f78bba2991501438ad9ca1a0812f6a2a3991cb178bec4c00bd8eec841777d8d9 vendor.display.config@1.10::IDisplayConfig
50369a070405a1f0cac44648f39ca32864c1339896d6eb16524b32fff9e95f03 vendor.display.config@1.10::IDisplayCWBCallback
10a290fc22df7680d00c53370870d5e941b7d60afcb94e90d2dd03369e7ccebc vendor.display.config@1.11::IDisplayConfig