meizu-m86/kexec-tools-arm64
1
0
Fork 0
mirror of https://github.com/meizu-m86/kexec-tools-arm64 synced 2025-11-04 05:46:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
116d9ac04e7a0d461e80e13d9ca343ab24da1be4
kexec-tools-arm64/Makefile.in
Laurent Dufour 75efb890f9 kexec/ppc64: bring up new ppc64le architecture 
This patch provides support for the new Power PC litte endian (LE) mode. The
LE mode only differs in the way the instructions and data are stored in memory
thus there is no real need to duplicate the ppc64 code.

However some compilation's options, especially for the purgatory, differ
between little and big endian mode's support. A new "SUBARCH" build variable
is introduced which is currently only used for PPC64 to specify the
endianness.

Another set of changes in this patch is fixing minor endianess issues in the
ppc64 code and fix an alignment issue raised on Power7 little endian mode.
Among these fixes, the check on the kernel binary endianess is removed,
since we can imagine kexecing a LE kernel from a BE environment, as far as
the specified root filesystem and initrd file are containing the right
binaries.

This patch depends on the patch "kexec/ppc64: use common architecture
fs2dt.c file" I sent earlier on the kexec mailing list.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2013-11-19 09:26:28 +09:00

328 lines
8.9 KiB
Makefile
Raw Blame History

# Hey Emacs this is a -*- makefile-*-
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
datarootdir = @datarootdir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
# The target architecture
ARCH = @ARCH@
SUBARCH = @SUBARCH@
OBJDIR = @OBJDIR@
target = @target@
host = @host@
# Compiler for building kexec
CC = @CC@
CPP = @CPP@
LD = @LD@
AS = @AS@
OBJCOPY = @OBJCOPY@
AR = @AR@
# C compiler for binaries to run during the build
BUILD_CC = @BUILD_CC@
BUILD_CFLAGS = @BUILD_CFLAGS@
TARGET_CC = @TARGET_CC@
TARGET_LD = @TARGET_LD@
TARGET_CFLAGS = @TARGET_CFLAGS@
# Base compiler flags. These are extended by the subcomponent-Makefiles
# where necessary.
CPPFLAGS = @CPPFLAGS@ -I$(srcdir)/include -I$(srcdir)/util_lib/include \
-Iinclude/ $($(ARCH)_CPPFLAGS)
CFLAGS = @CFLAGS@ -fno-strict-aliasing -Wall -Wstrict-prototypes
PURGATORY_EXTRA_CFLAGS = @PURGATORY_EXTRA_CFLAGS@
ASFLAGS = @ASFLAGS@ $($(ARCH)_ASFLAGS)
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
# Utilities called by the makefiles
INSTALL = @INSTALL@
MKDIR = @MKDIR@
RM = @RM@
CP = @CP@
LN = @LN@
TAR = @TAR@
RPMBUILD = @RPMBUILD@
SED = @SED@
FIND = @FIND@
XARGS = @XARGS@
DIRNAME = @DIRNAME@
STRIP = @STRIP@
pkgdatadir = $(datadir)/$(PACKAGE_NAME)
pkglibdir = $(libdir)/$(PACKAGE_NAME)
pkgincludedir = $(includedir)/$(PACKAGE_NAME)
# You can specify DESTDIR on the command line to do a add
# a prefix to the install so it doesn't really happen
# Useful for building binary packages
DESTDIR =
srcdir = @srcdir@
VPATH = .:$(srcdir)
# install paths
BUILD_PREFIX:=build
SBINDIR=$(BUILD_PREFIX)/sbin
BINDIR=$(BUILD_PREFIX)/bin
LIBEXECDIR=$(BUILD_PREFIX)/libexec
DATADIR=$(BUILD_PREFIX)/share
SYSCONFDIR=$(BUILD_PREFIX)/etc
SHAREDSTATEDIR=$(BUILD_PREFIX)/com
LOCALSTATEDIR=$(BUILD_PREFIX)/var
LIBDIR=$(BUILD_PREFIX)/lib
INFODIR=$(BUILD_PREFIX)/info
MANDIR=$(BUILD_PREFIX)/man
MAN1DIR=$(MANDIR)/man1
MAN2DIR=$(MANDIR)/man2
MAN3DIR=$(MANDIR)/man3
MAN4DIR=$(MANDIR)/man4
MAN5DIR=$(MANDIR)/man5
MAN6DIR=$(MANDIR)/man6
MAN7DIR=$(MANDIR)/man7
MAN8DIR=$(MANDIR)/man8
INCLUDEDIR=$(BUILD_PREFIX)/include
PKGDATADIR=$(DATADIR)/$(PACKAGE_NAME)
PKGLIBDIR=$(LIBDIR)/$(PACKAGE_NAME)
PKGINCLUDEIR=$(INCLUDEDIR)/$(PACKAGE_NAME)
all: targets
# generic build rules
%.o: %.c
@$(MKDIR) -p $(@D)
$(COMPILE.c) -MD -o $@ $<
%.o: %.S
@$(MKDIR) -p $(@D)
$(COMPILE.S) -MD -o $@ $<
# collect objects to be removed in 'make clean'
clean =
dist = AUTHORS COPYING INSTALL News TODO Makefile.in configure.ac configure \
kexec-tools.spec.in config/
# utility function for converting a list of files (with extension) to
# file.o (or file.d) format.
objify = $(addsuffix .o, $(basename $(1)))
depify = $(addsuffix .d, $(basename $(1)))
# Documentation
#
include $(srcdir)/doc/Makefile
# Headers
#
include $(srcdir)/include/Makefile
# Utility function library
#
include $(srcdir)/util_lib/Makefile
#
# Stand alone utilities
#
include $(srcdir)/util/Makefile
#
# purgatory (code between kernels)
#
include $(srcdir)/purgatory/Makefile
#
# kexec (linux booting linux)
#
include $(srcdir)/kexec/Makefile
# kdump (read a crashdump from memory)
#
include $(srcdir)/kdump/Makefile
# vmcore-dmesg (read dmesg from a vmcore)
#
include $(srcdir)/vmcore-dmesg/Makefile
#
# kexec_test (test program)
#
include $(srcdir)/kexec_test/Makefile
SPEC=$(PACKAGE_NAME).spec
GENERATED_SRCS:= $(SPEC)
TARBALL=$(PACKAGE_NAME)-$(PACKAGE_VERSION).tar
TARBALL.gz=$(TARBALL).gz
SRCS:= $(dist)
PSRCS:=$(foreach s, $(SRCS), $(PACKAGE_NAME)-$(PACKAGE_VERSION)/$(s))
PGSRCS:=$(foreach s, $(GENERATED_SRCS), $(PACKAGE_NAME)-$(PACKAGE_VERSION)/$(s))
MAN_PAGES:=$(KEXEC_MANPAGE) $(KDUMP_MANPAGE) $(VMCORE_DMESG_MANPAGE)
BINARIES_i386:=$(KEXEC_TEST)
BINARIES_x86_64:=$(KEXEC_TEST)
BINARIES:=$(KEXEC) $(KDUMP) $(VMCORE_DMESG) $(BINARIES_$(ARCH))
TARGETS:=$(BINARIES) $(MAN_PAGES)
targets: $(TARGETS)
Makefile: Makefile.in config.status
./config.status
configure: configure.ac
cd $(srcdir) && autoheader && autoconf && rm -rf autom4te.cache
tarball: $(TARBALL.gz)
$(TARBALL): $(SRCS) $(GENERATED_SRCS)
$(RM) -f $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(LN) -s $(srcdir) $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(TAR) -cf $@ $(PSRCS)
$(RM) -f $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(LN) -sf . $(PACKAGE_NAME)-$(PACKAGE_VERSION)
$(TAR) -rf $@ $(PGSRCS)
$(RM) -f $(PACKAGE_NAME)-$(PACKAGE_VERSION)
@echo $(dist)
$(TARBALL.gz): $(TARBALL)
gzip -c < $^ > $@
rpm: $(TARBALL.gz)
unset MAKEFLAGS MAKELEVEL;
$(RPMBUILD) -ta $(TARBALL.gz)
$(SPEC): kexec-tools.spec.in Makefile
$(SED) -e 's,^Version: $$,Version: $(PACKAGE_VERSION),' $< > $@
echo::
@echo ARCH=$(ARCH)
@echo BINARIES=$(BINARIES)
@echo TARGETS=$(TARGETS)
@echo CC=$(CC)
@echo AR=$(AR)
@echo LD=$(LD)
@echo STRIP=$(STRIP)
clean:
$(RM) -f $(clean)
$(RM) -rf build
$(RM) -f $(TARBALL) $(TARBALL.gz)
distclean: dist-clean
dist-clean: clean
$(RM) -f config.log config.status config.cache Makefile include/config.h
$(RM) -f include/config.h.in configure $(SPEC)
$(RM) -rf autom4te.cache
install: $(TARGETS)
for file in $(TARGETS) ; do \
if test `$(DIRNAME) $$file` = "$(SBINDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(sbindir)/; \
$(INSTALL) -m 755 $$file $(DESTDIR)/$(sbindir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(BINDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(bindir)/; \
$(INSTALL) -m 755 $$file $(DESTDIR)/$(bindir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(LIBEXECDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(libexecdir)/; \
$(INSTALL) -m 755 $$file $(DESTDIR)/$(libexecdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(DATADIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(datadir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(datadir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(SYSCONFDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(sysconfdir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(sysconfdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(SHAREDSTATEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(sharedstatedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(sharedstatedir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(LOCALSTATEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(localstatedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(localstatedir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(LIBDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(libdir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(libdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(INFODIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(infodir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(infodir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN1DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man1; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man1; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN2DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man2; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man2; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN3DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man3/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man3/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN4DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man4/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man4/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN5DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man5/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man5/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN6DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man6/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man6/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN7DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man7/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man7/; \
fi; \
if test `$(DIRNAME) $$file` = "$(MAN8DIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(mandir)/man8/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(mandir)/man8/; \
fi; \
if test `$(DIRNAME) $$file` = "$(INCLUDEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(includedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(includedir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(PKGDATADIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(pkgdatadir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkgdatadir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(PKGLIBDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(pkglibdir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkglibdir)/; \
fi; \
if test `$(DIRNAME) $$file` = "$(PKGINCLUDEDIR)" ; then \
$(MKDIR) -p $(DESTDIR)/$(pkgincludedir)/; \
$(INSTALL) -m 644 $$file $(DESTDIR)/$(pkgincludedir)/; \
fi; \
done
.PHONY: echo install all targets clean dist-clean distclean \
maintainer-clean maintainerclean tarball rpm
Reference in New Issue View Git Blame Copy Permalink