45 lines
2.0 KiB
Plaintext
45 lines
2.0 KiB
Plaintext
# This file contains info about ROMs capabilites and boot process.
|
|
# It should be placed in ROM's folder (eg. /media/multirom/roms/*rom_name*)
|
|
# and must be named "rom_info.txt".
|
|
# Make sure you got the syntax correct, as the parser is probably pretty
|
|
# dumb. Lines with comments must start with #. Beware the whitespaces.
|
|
# If you need to use " character in string, just use it, no need to escape it
|
|
# MultiROM searches for first and last " on the line.
|
|
# These comments should not be deleted.
|
|
|
|
# So far, the only supported ROM type for these files is kexec-based linux
|
|
type="kexec"
|
|
|
|
# Paths to root of the ROM.
|
|
# Both image and folder can be specified at one time, MultiROM will use
|
|
# the one which it can find. If both are present, folder is used.
|
|
# Must _not_ contain spaces.
|
|
# Path is from root of the root partition, but you will usually want
|
|
# to use following alias:
|
|
# - %m - ROM's folder (eg. /media/multirom/roms/*rom_name*)
|
|
root_dir="%m/root"
|
|
root_img="%m/root.img"
|
|
root_img_fs="ext4"
|
|
|
|
# Path to kernel and initrd. Kernel path _must_ be specified.
|
|
# Paths are relative to the folder in which is this file
|
|
# Those can be outside the root folder/image, or use %r if it is in there:
|
|
# kernel_path="%r/boot/vmlinuz"
|
|
# If ROM is in images, it will mount the image and load it from there.
|
|
# You can use * _at the end of the filename_ as wildcard character.
|
|
kernel_path="%r/boot/vmlinuz"
|
|
initrd_path="%r/boot/initrd.img-*"
|
|
|
|
# Set up the cmdline
|
|
# img_cmdline and dir_cmdline are appended to base_cmdline.
|
|
# Several aliases are used:
|
|
# - %b - base command line from bootloader. You want this as first thing in cmdline.
|
|
# - %d - root device. is either "UUID=..." (USB drive) or "/dev/mmcblk0p9" or "/dev/mmcblk0p10"
|
|
# - %r - root fs type
|
|
# - %s - root directory, from root of the root device
|
|
# - %i - root image, from root of the root device
|
|
# - %f - fs of the root image
|
|
base_cmdline="%b root=%d rootfstype=%r rw console=tty0 fbcon=rotate:1 access=m2 splash rootflags=defaults,noatime,nodiratime quiet"
|
|
img_cmdline="loop=%i loopfstype=%f"
|
|
dir_cmdline="rootsubdir=%s"
|