bt-devicetree: Import changes from CPH2581_15.0.0.850(EX01)

Change-Id: I01559291086e3fb5ee94e205f51f21e1cb9f3f49
Signed-off-by: chandu078 <chandudyavanapelli03@gmail.com>

qcom/bt/Kbuild

@@ -3,7 +3,11 @@ dtbo-y += kalama-bt.dtbo
 endif
 
 ifeq ($(CONFIG_ARCH_PINEAPPLE),y)
+ifeq ($(OPLUS_WIFI_ONLY),true)
+dtbo-y += oplus/caihong-23926-bt-pineapple-overlay.dtbo
+else
 dtbo-y += pineapple-kiwi-bt.dtbo
+endif
 dtbo-y += pineapple-hdk-kiwi-bt.dtbo
 dtbo-y += pineapple-aim500-kiwi-bt.dtbo
 endif

qcom/bt/oplus/caihong-23926-bt-pineapple-overlay.dts

@@ -0,0 +1,14 @@
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/oplus/hw-id.h>
+#include "caihong-23926-bt-pineapple-overlay.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Pineapple SoCs";
+	compatible = "qcom,pineapple", "qcom,pineapplep";
+	qcom,msm-id = <557 0x10000>, <577 0x10000>, <557 0x20000>, <577 0x20000>;
+	qcom,board-id = <0 0>;
+
+	oplus,project-id = <23926 23927 23976 23978>;
+};

qcom/bt/oplus/caihong-23926-bt-pineapple-overlay.dtsi

@@ -0,0 +1,78 @@
+#include <dt-bindings/interconnect/qcom,pineapple.h>
+
+&tlmm {
+        bt_en_sleep: bt_en_sleep {
+                mux {
+                        pins = "gpio17";
+                        function = "gpio";
+                };
+
+                config {
+                        pins = "gpio17";
+                        drive-strength = <2>;
+                        output-low;
+                        bias-pull-down;
+                };
+        };
+};
+
+&soc {
+	bluetooth: bt_kiwi {
+			compatible = "qcom,kiwi";
+			pinctrl-names = "bt_en_sleep";
+			pinctrl-0 = <&bt_en_sleep>;
+			/* List of GPIOs to be setup for interrupt wakeup capable*/
+			mpm_wake_set_gpios = <18>;
+			qcom,bt-reset-gpio = <&tlmm 17 0>; /* BT_EN */
+			qcom,wl-reset-gpio = <&tlmm 16 0>; /* WL_EN */
+			qcom,bt-sw-ctrl-gpio = <&tlmm 18 0>; /* SW_CTRL */
+			mboxes = <&qmp_aop 0>;
+
+			qcom,bt-vdd18-aon-supply  = <&L15B>; /* BT VDD1.8 AON */
+			qcom,bt-vdd12-io-supply   = <&L3C>;  /* BT VDD1.2V IO */
+			//qcom,bt-ant-ldo-supply    = <&L3K>;  /* BT ANT */
+			qcom,bt-vdd-dig-supply    = <&S3C>;  /* BT LDO*/
+			qcom,bt-vdd-aon-supply    = <&S3C>;  /* BT AON LDO*/
+			qcom,bt-vdd-rfaOp8-supply = <&S3C>;  /* BT RFAOp8 CMN LDO*/
+			qcom,bt-vdd-rfa1-supply   = <&S1C>;  /* BT RFA1.2 LDO */
+			qcom,bt-vdd-rfa2-supply   = <&S6C>;  /* BT RFA1.8 LDO */
+
+			qcom,bt-vdd18-aon-config  = <1800000 1800000 0 1>;
+			qcom,bt-vdd12-io-config   = <1200000 1200000 0 1>;
+			//qcom,bt-ant-ldo-config    = <1200000 1200000 0 1>;
+			qcom,bt-vdd-aon-config    = <916000 916000 0 1>;
+			qcom,bt-vdd-dig-config    = <916000 916000 0 1>;
+			qcom,bt-vdd-rfaOp8-config = <916000 916000 0 1>;
+			qcom,bt-vdd-rfa1-config   = <1316000 1316000 0 1>;
+			qcom,bt-vdd-rfa2-config   = <1864000 1864000 0 1>;
+			qcom,pdc_init_table=
+				"{class: wlan_pdc, ss: rf, res: s3c.v, upval: 916}",
+				"{class: wlan_pdc, ss: rf, res: s3c.v, dwnval: 612}",
+				"{class: wlan_pdc, ss: rf, res: s1c.v, upval: 1316}",
+				"{class: wlan_pdc, ss: rf, res: s1c.v, dwnval: 944}",
+				"{class: wlan_pdc, ss: rf, res: s6c.v, upval: 1864}",
+				"{class: wlan_pdc, ss: rf, res: s6c.v, dwnval: 1820}";
+	};
+	slim_msm: slim@6C40000 {
+		status =  "ok";
+		ngd@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			//slimbus child nodes
+			slimbus: btfmslim-driver {
+				compatible = "slim217,221";
+				reg = <1 0>;
+				qcom,btslim-address  = <0x0>; /* BT SLIM EP address*/
+				qcom,btslimtx-channels = <159 160>; /* slimbus FM_Tx, SCO_Tx channels */
+				qcom,btslimrx-channels = <157 158>; /* slimbus SCO_A2DP_Rx A2DP_Rx */
+			};
+		};
+	};
+};
+
+
+//uart instance
+&qupv3_se14_4uart {
+       status = "ok";
+};

qcom/bt/pineapple-kiwi-bt.dtsi

@@ -30,7 +30,9 @@
 
 			qcom,bt-vdd18-aon-supply  = <&L15B>; /* BT VDD1.8 AON */
 			qcom,bt-vdd12-io-supply   = <&L3C>;  /* BT VDD1.2V IO */
-			qcom,bt-ant-ldo-supply    = <&L6K>;  /* BT ANT */
+//#ifndef OPLUS_BUG_STABILITY
+			//qcom,bt-ant-ldo-supply    = <&L6K>;  /* BT ANT */
+//#endif /* OPLUS_BUG_STABILITY */
 			qcom,bt-vdd-dig-supply    = <&S3C>;  /* BT LDO*/
 			qcom,bt-vdd-aon-supply    = <&S3C>;  /* BT AON LDO*/
 			qcom,bt-vdd-rfaOp8-supply = <&S3C>;  /* BT RFAOp8 CMN LDO*/
@@ -77,7 +79,10 @@
 	fm_rtc6226: nq@64 {
 		compatible = "rtc6226";
 		reg = <0x64>;
-		fmint-gpio = <&tlmm 85 0>;
+//#ifdef OPLUS_BUG_COMPATIBILITY
+//remove fm gpio config
+		//fmint-gpio = <&tlmm 85 0>;
+//#endif /* OPLUS_BUG_COMPATIBILITY */
 		vdd-supply = <&L16B>;
 		rtc6226,vdd-supply-voltage = <2800000 2800000>;
 		rtc6226,vdd-load = <15000>;