mirror of
https://github.com/oplus-giulia-dev/android_kernel_oneplus_sm8650-devicetrees
synced 2025-11-04 06:44:04 +08:00
82241ff8d2
Add Goodix touch driver device node on blair for CDP platform. Change-Id: I99c6e9e1539c1c9bd2e7566563fc19f453ef1ffd
391 lines
9.7 KiB
Plaintext
391 lines
9.7 KiB
Plaintext
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/clock/qcom,gcc-blair.h>
|
|
#include <dt-bindings/input/linux-event-codes.h>
|
|
#include "blair-pmic-overlay-pm6125.dtsi"
|
|
#include "holi-pm7250b.dtsi"
|
|
#include <dt-bindings/iio/qti_power_supply_iio.h>
|
|
|
|
|
|
&ufsphy_mem {
|
|
compatible = "qcom,ufs-phy-qmp-v4-blair";
|
|
|
|
/* VDDA_UFS_CORE */
|
|
vdda-phy-supply = <&L7A>;
|
|
vdda-phy-max-microamp = <85700>;
|
|
|
|
/* VDDA_UFS_0_1P2 */
|
|
vdda-pll-supply = <&L4A>;
|
|
vdda-pll-max-microamp = <18300>;
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&ufshc_mem {
|
|
vdd-hba-supply = <&gcc_ufs_phy_gdsc>;
|
|
vdd-hba-fixed-regulator;
|
|
|
|
vcc-supply = <&L24A>;
|
|
vcc-max-microamp = <800000>;
|
|
|
|
vccq2-supply = <&L11A>;
|
|
vccq2-max-microamp = <800000>;
|
|
|
|
/* VDD_PX10 is voted for the ufs_reset_n */
|
|
qcom,vddp-ref-clk-supply = <&L4A>;
|
|
qcom,vddp-ref-clk-max-microamp = <100>;
|
|
|
|
reset-gpios = <&tlmm 156 GPIO_ACTIVE_LOW>;
|
|
resets = <&gcc GCC_UFS_PHY_BCR>;
|
|
reset-names = "rst";
|
|
|
|
status = "ok";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
|
|
vdd-supply = <&L24A>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 570000>;
|
|
|
|
vdd-io-supply = <&L11A>;
|
|
qcom,vdd-io-always-on;
|
|
qcom,vdd-io-lpm-sup;
|
|
qcom,vdd-io-voltage-level = <1800000 1800000>;
|
|
qcom,vdd-io-current-level = <0 325000>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "ok";
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
|
|
vdd-supply = <&L22A>;
|
|
qcom,vdd-voltage-level = <2960000 2960000>;
|
|
qcom,vdd-current-level = <0 800000>;
|
|
|
|
vdd-io-supply = <&L5A>;
|
|
qcom,vdd-io-voltage-level = <1800000 2960000>;
|
|
qcom,vdd-io-current-level = <0 22000>;
|
|
|
|
cd-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
&soc {
|
|
touch_avdd: touch_avdd_stub {
|
|
/*
|
|
* Touch eLDO controlled by gpio#53 is always ON.
|
|
* Using dummy regulator.
|
|
*/
|
|
compatible = "qcom,stub-regulator";
|
|
regulator-name = "touch_avdd_stub";
|
|
qcom,hpm-min-load = <10000>;
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <3544000>;
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
label = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&key_vol_up_default>;
|
|
|
|
vol_up {
|
|
label = "volume_up";
|
|
gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
gpio-key,wakeup;
|
|
debounce-interval = <15>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qupv3_se8_i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
qcom,i2c-touch-active= "synaptics,tcm-i2c";
|
|
|
|
synaptics_tcm@20 {
|
|
compatible = "synaptics,tcm-i2c";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 0x2008>;
|
|
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
|
"pmx_ts_release";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&pmx_ts_release>;
|
|
vdd-supply = <&L9A>;
|
|
avdd-supply = <&touch_avdd>;
|
|
synaptics,pwr-reg-name = "avdd";
|
|
synaptics,bus-reg-name = "vdd";
|
|
synaptics,irq-gpio = <&tlmm 22 0x2008>;
|
|
synaptics,irq-on-state = <0>;
|
|
synaptics,reset-gpio = <&tlmm 21 0x00>;
|
|
synaptics,reset-on-state = <0>;
|
|
synaptics,reset-active-ms = <20>;
|
|
synaptics,reset-delay-ms = <200>;
|
|
synaptics,power-delay-ms = <200>;
|
|
synaptics,ubl-i2c-addr = <0x20>;
|
|
synaptics,extend_report;
|
|
synaptics,firmware-name = "synaptics_firmware.img";
|
|
};
|
|
|
|
focaltech@38 {
|
|
compatible = "focaltech,fts_ts";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 0x2008>;
|
|
focaltech,reset-gpio = <&tlmm 21 0x00>;
|
|
focaltech,irq-gpio = <&tlmm 22 0x2008>;
|
|
focaltech,max-touch-number = <5>;
|
|
focaltech,display-coords = <0 0 1080 2340>;
|
|
focaltech,touch-type = "primary";
|
|
|
|
vdd-supply = <&touch_avdd>;
|
|
|
|
pinctrl-names = "pmx_ts_active", "pmx_ts_suspend",
|
|
"pmx_ts_release";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&pmx_ts_release>;
|
|
};
|
|
|
|
novatek@62 {
|
|
compatible = "novatek,NVT-ts";
|
|
reg = <0x62>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 0x2008>;
|
|
|
|
pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
|
|
"pmx_ts_release";
|
|
pinctrl-0 = <&ts_active>;
|
|
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
|
|
pinctrl-2 = <&pmx_ts_release>;
|
|
|
|
novatek,reset-gpio = <&tlmm 21 0x00>;
|
|
novatek,irq-gpio = <&tlmm 22 0x2008>;
|
|
};
|
|
|
|
goodix-berlin@5d {
|
|
compatible = "goodix,gt9916";
|
|
reg = <0x5d>;
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <22 0x2008>;
|
|
goodix,reset-gpio = <&tlmm 21 0x00>;
|
|
goodix,irq-gpio = <&tlmm 22 0x2008>;
|
|
goodix,irq-flags = <2>;
|
|
goodix,panel-max-x = <1080>;
|
|
goodix,panel-max-y = <2400>;
|
|
goodix,panel-max-w = <255>;
|
|
goodix,panel-max-p = <4096>;
|
|
goodix,firmware-name = "goodix_firmware_i2c.bin";
|
|
goodix,config-name = "goodix_cfg_group_i2c.bin";
|
|
invert_xy;
|
|
goodix,touch-type = "primary";
|
|
goodix,qts_en;
|
|
};
|
|
};
|
|
|
|
&pm7250b_charger {
|
|
status = "ok";
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_vadc ADC5_USB_IN_V_16>,
|
|
<&pm7250b_vadc ADC5_USB_IN_I>,
|
|
<&pm7250b_vadc ADC5_CHG_TEMP>,
|
|
<&pm7250b_vadc ADC5_DIE_TEMP>,
|
|
<&pm7250b_vadc ADC5_AMUX_THM3_100K_PU>,
|
|
<&pm7250b_vadc ADC5_SBUx>,
|
|
<&pm7250b_vadc ADC5_VPH_PWR>,
|
|
<&pm7250b_vadc ADC5_AMUX_THM1_100K_PU>,
|
|
<&pm7250b_qg PSY_IIO_RESISTANCE_ID>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_NOW>,
|
|
<&pm7250b_qg PSY_IIO_TEMP>,
|
|
<&pm7250b_qg PSY_IIO_CAPACITY>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_OCV>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_AVG>,
|
|
<&pm7250b_qg PSY_IIO_DEBUG_BATTERY>,
|
|
<&pm7250b_qg PSY_IIO_REAL_CAPACITY>,
|
|
<&pm7250b_qg PSY_IIO_CC_SOC>,
|
|
<&pm7250b_qg PSY_IIO_CURRENT_NOW>,
|
|
<&pm7250b_qg PSY_IIO_VOLTAGE_MAX>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_FULL>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_COUNTER>,
|
|
<&pm7250b_qg PSY_IIO_CYCLE_COUNT>,
|
|
<&pm7250b_qg PSY_IIO_CHARGE_FULL_DESIGN>,
|
|
<&pm7250b_qg PSY_IIO_TIME_TO_FULL_NOW>;
|
|
io-channel-names = "usb_in_voltage",
|
|
"usb_in_current",
|
|
"chg_temp",
|
|
"die_temp",
|
|
"conn_temp",
|
|
"sbux_res",
|
|
"vph_voltage",
|
|
"skin_temp",
|
|
"resistance_id",
|
|
"voltage_now",
|
|
"temp",
|
|
"capacity",
|
|
"voltage_ocv",
|
|
"voltage_avg",
|
|
"debug_battery",
|
|
"real_capacity",
|
|
"cc_soc",
|
|
"current_now",
|
|
"voltage_max",
|
|
"charge_full",
|
|
"charge_counter",
|
|
"cycle_count",
|
|
"charge_full_design",
|
|
"time_to_full_now";
|
|
qcom,batteryless-platform;
|
|
qcom,sec-charger-config = <0>;
|
|
qcom,auto-recharge-soc = <98>;
|
|
qcom,step-charging-enable;
|
|
qcom,sw-jeita-enable;
|
|
qcom,charger-temp-max = <800>;
|
|
qcom,smb-temp-max = <800>;
|
|
qcom,suspend-input-on-debug-batt;
|
|
};
|
|
|
|
&pm7250b_qg {
|
|
status = "ok";
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_vadc ADC5_BAT_THERM_100K_PU>,
|
|
<&pm7250b_vadc ADC5_BAT_ID_100K_PU>,
|
|
<&pm7250b_charger PSY_IIO_INPUT_CURRENT_LIMITED>,
|
|
<&pm7250b_charger PSY_IIO_RECHARGE_SOC>,
|
|
<&pm7250b_charger PSY_IIO_FORCE_RECHARGE>,
|
|
<&pm7250b_charger PSY_IIO_CHARGE_DONE>;
|
|
io-channel-names = "batt-therm",
|
|
"batt-id",
|
|
"input_current_limited",
|
|
"recharge_soc",
|
|
"force_recharge",
|
|
"charge_done";
|
|
qcom,qg-iterm-ma = <100>;
|
|
qcom,hold-soc-while-full;
|
|
qcom,linearize-soc;
|
|
qcom,cl-feedback-on;
|
|
qcom,vbatt-cutoff-mv = <3400>;
|
|
qcom,vbatt-empty-mv = <3200>;
|
|
qcom,vbatt-empty-cold-mv = <3100>;
|
|
qcom,vbatt-low-mv = <3500>;
|
|
qcom,fvss-vbatt-mv = <3500>;
|
|
};
|
|
|
|
&pm7250b_charger {
|
|
dpdm-supply = <&usb2_phy0>;
|
|
|
|
smb5_vbus: qcom,smb5-vbus {
|
|
regulator-name = "smb5-vbus";
|
|
};
|
|
|
|
smb5_vconn: qcom,smb5-vconn {
|
|
regulator-name = "smb5-vconn";
|
|
};
|
|
};
|
|
|
|
&pm7250b_pdphy {
|
|
vdd-pdphy-supply = <&L7E>;
|
|
vbus-supply = <&smb5_vbus>;
|
|
vconn-supply = <&smb5_vconn>;
|
|
|
|
#io-channel-cells = <1>;
|
|
io-channels = <&pm7250b_charger PSY_IIO_PD_ACTIVE>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_CC_ORIENTATION>,
|
|
<&pm7250b_charger PSY_IIO_CONNECTOR_TYPE>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_POWER_ROLE>,
|
|
<&pm7250b_charger PSY_IIO_PD_USB_SUSPEND_SUPPORTED>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_SRC_RP>,
|
|
<&pm7250b_charger PSY_IIO_PD_IN_HARD_RESET>,
|
|
<&pm7250b_charger PSY_IIO_PD_CURRENT_MAX>,
|
|
<&pm7250b_charger PSY_IIO_PR_SWAP>,
|
|
<&pm7250b_charger PSY_IIO_PD_VOLTAGE_MIN>,
|
|
<&pm7250b_charger PSY_IIO_PD_VOLTAGE_MAX>,
|
|
<&pm7250b_charger PSY_IIO_USB_REAL_TYPE>,
|
|
<&pm7250b_charger PSY_IIO_TYPEC_MODE>,
|
|
<&pm7250b_charger PSY_IIO_PE_START>;
|
|
io-channel-names = "pd_active",
|
|
"typec_cc_orientation",
|
|
"connector_type",
|
|
"typec_power_role",
|
|
"pd_usb_suspend_supported",
|
|
"typec_src_rp",
|
|
"pd_in_hard_reset",
|
|
"pr_current_max",
|
|
"pr_swap",
|
|
"pd_voltage_min",
|
|
"pd_voltage_max",
|
|
"real_type",
|
|
"typec_mode",
|
|
"pe_start";
|
|
};
|
|
|
|
&qupv3_se10_i2c {
|
|
awinic@64 {
|
|
compatible = "awinic,aw2016_led";
|
|
reg = <0x64>;
|
|
|
|
awinic,red {
|
|
awinic,name = "red";
|
|
awinic,id = <0>;
|
|
awinic,imax = <2>;
|
|
awinic,led-current = <3>;
|
|
awinic,max-brightness = <255>;
|
|
awinic,rise-time-ms = <6>;
|
|
awinic,hold-time-ms = <0>;
|
|
awinic,fall-time-ms = <6>;
|
|
awinic,off-time-ms = <4>;
|
|
};
|
|
|
|
awinic,green {
|
|
awinic,name = "green";
|
|
awinic,id = <1>;
|
|
awinic,imax = <2>;
|
|
awinic,led-current = <3>;
|
|
awinic,max-brightness = <255>;
|
|
awinic,rise-time-ms = <6>;
|
|
awinic,hold-time-ms = <0>;
|
|
awinic,fall-time-ms = <6>;
|
|
awinic,off-time-ms = <4>;
|
|
};
|
|
|
|
awinic,blue {
|
|
awinic,name = "blue";
|
|
awinic,id = <2>;
|
|
awinic,imax = <2>;
|
|
awinic,led-current = <3>;
|
|
awinic,max-brightness = <255>;
|
|
awinic,rise-time-ms = <6>;
|
|
awinic,hold-time-ms = <0>;
|
|
awinic,fall-time-ms = <6>;
|
|
awinic,off-time-ms = <4>;
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&usb0 {
|
|
extcon = <&pm7250b_pdphy>, <&pm7250b_charger>, <&eud>;
|
|
#io-channel-cells = <1>;
|
|
io-channels= <&pm7250b_charger PSY_IIO_USB_REAL_TYPE>;
|
|
io-channel-names = "chg_type";
|
|
|
|
dwc3@4e00000 {
|
|
dr_mode = "otg";
|
|
};
|
|
|
|
};
|