diff --git a/overlay/FrameworksResXiaomi/res/values/config.xml b/overlay/FrameworksResXiaomi/res/values/config.xml
index 22bbd95..1954eea 100644
--- a/overlay/FrameworksResXiaomi/res/values/config.xml
+++ b/overlay/FrameworksResXiaomi/res/values/config.xml
@@ -7,371 +7,6 @@
     <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
     <integer name="config_shutdownBatteryTemperature">580</integer>
 
-    <!-- Minimum screen brightness setting allowed by power manager.
-         -2 is invalid so setting will resort to int value specified above.
-         Set this to 0.0 to allow screen to go to minimal brightness.
-         The user is forbidden from setting the brightness below this level. -->
-    <item format="float" name="config_screenBrightnessSettingMinimumFloat" type="dimen">0</item>
-
-    <!-- Maximum screen brightness allowed by the power manager.
-         -2 is invalid so setting will resort to int value specified above.
-         Set this to 1.0 for maximum brightness range.
-         The user is forbidden from setting the brightness above this level. -->
-    <item format="float" name="config_screenBrightnessSettingMaximumFloat" type="dimen">1</item>
-
-    <!-- Default screen brightness setting set.
-         -2 is invalid so setting will resort to int value specified above.
-         Must be in the range specified by minimum and maximum. -->
-    <item format="float" name="config_screenBrightnessSettingDefaultFloat" type="dimen">0.5</item>
-
-    <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
-         for debouncing the light sensor.  Different constants are used to debounce the light sensor
-         when adapting to brighter or darker environments.  This parameter controls how quickly
-         brightness changes occur in response to an observed change in light level that exceeds the
-         hysteresis threshold. -->
-    <integer name="config_autoBrightnessBrighteningLightDebounce">1000</integer>
-    <integer name="config_autoBrightnessDarkeningLightDebounce">1000</integer>
-
-    <!-- The maximum range of gamma adjustment possible using the screen
-         auto-brightness adjustment setting. -->
-    <fraction name="config_autoBrightnessAdjustmentMaxGamma">100.0%</fraction>
-
-    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
-         The N entries of this array define N + 1 control points as follows:
-         (1-based arrays)
-
-         Point 1:            (0, value[1]):             lux <= 0
-         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
-         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
-         ...
-         Point N+1: (level[N], value[N+1]):  level[N] < lux
-
-         The control points must be strictly increasing.  Each control point
-         corresponds to an entry in the brightness backlight values arrays.
-         For example, if lux == level[1] (first element of the levels array)
-         then the brightness will be determined by value[2] (second element
-         of the brightness values array).
-
-         Spline interpolation is used to determine the auto-brightness
-         backlight values for lux levels between these control points.
-
-         Must be overridden in platform specific overlays -->
-    <integer-array name="config_autoBrightnessLevels">
-        <item>1</item>
-        <item>2</item>
-        <item>4</item>
-        <item>6</item>
-        <item>8</item>
-        <item>10</item>
-        <item>15</item>
-        <item>20</item>
-        <item>25</item>
-        <item>30</item>
-        <item>35</item>
-        <item>40</item>
-        <item>45</item>
-        <item>50</item>
-        <item>55</item>
-        <item>60</item>
-        <item>65</item>
-        <item>70</item>
-        <item>75</item>
-        <item>80</item>
-        <item>85</item>
-        <item>90</item>
-        <item>95</item>
-        <item>100</item>
-        <item>120</item>
-        <item>140</item>
-        <item>160</item>
-        <item>180</item>
-        <item>200</item>
-        <item>220</item>
-        <item>240</item>
-        <item>260</item>
-        <item>280</item>
-        <item>300</item>
-        <item>320</item>
-        <item>340</item>
-        <item>360</item>
-        <item>380</item>
-        <item>400</item>
-        <item>420</item>
-        <item>440</item>
-        <item>460</item>
-        <item>480</item>
-        <item>500</item>
-        <item>700</item>
-        <item>900</item>
-        <item>1100</item>
-        <item>1300</item>
-        <item>1500</item>
-        <item>1700</item>
-        <item>1900</item>
-        <item>2000</item>
-        <item>2500</item>
-        <item>3000</item>
-        <item>3500</item>
-        <item>4000</item>
-        <item>4500</item>
-        <item>5000</item>
-        <item>5500</item>
-        <item>6000</item>
-        <item>6500</item>
-        <item>7000</item>
-        <item>7500</item>
-        <item>8000</item>
-        <item>8500</item>
-        <item>9000</item>
-        <item>9500</item>
-        <item>10000</item>
-        <item>10500</item>
-        <item>11000</item>
-        <item>11500</item>
-        <item>12000</item>
-        <item>12500</item>
-        <item>13000</item>
-        <item>13500</item>
-        <item>14000</item>
-        <item>14500</item>
-        <item>15000</item>
-        <item>16000</item>
-        <item>17000</item>
-        <item>18000</item>
-        <item>19000</item>
-        <item>20000</item>
-        <item>21000</item>
-        <item>22000</item>
-        <item>23000</item>
-        <item>24000</item>
-        <item>25000</item>
-        <item>26000</item>
-        <item>27000</item>
-        <item>28000</item>
-        <item>29000</item>
-        <item>30000</item>
-        <item>35000</item>
-        <item>40000</item>
-        <item>45000</item>
-        <item>50000</item>
-        <item>55000</item>
-        <item>60000</item>
-        <item>65000</item>
-        <item>70000</item>
-        <item>75000</item>
-        <item>80000</item>
-        <item>85000</item>
-        <item>90000</item>
-        <item>95000</item>
-        <item>100000</item>
-    </integer-array>
-
-    <!-- Array of output values for LCD backlight corresponding to the lux values
-         in the config_autoBrightnessLevels array.  This array should have size one greater
-         than the size of the config_autoBrightnessLevels array.
-         The brightness values must be between 0 and 255 and be non-decreasing.
-         This must be overridden in platform specific overlays -->
-    <integer-array name="config_autoBrightnessLcdBacklightValues" />
-
-    <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. The display brightness is defined as the measured
-         brightness of an all-white image.
-
-         If this is defined then:
-            - config_autoBrightnessLcdBacklightValues should not be defined
-            - config_screenBrightnessNits must be defined
-            - config_screenBrightnessBacklight must be defined
-
-         This array should have size one greater than the size of the config_autoBrightnessLevels
-         array. The brightness values must be non-negative and non-decreasing. This must be
-         overridden in platform specific overlays -->
-    <array name="config_autoBrightnessDisplayValuesNits">
-        <item>2.0</item>
-        <item>2.5</item>
-        <item>2.8</item>
-        <item>16.3</item>
-        <item>26.2</item>
-        <item>32.0</item>
-        <item>36.9</item>
-        <item>49.4</item>
-        <item>63.7</item>
-        <item>82.5</item>
-        <item>89.9</item>
-        <item>91.6</item>
-        <item>91.6</item>
-        <item>91.6</item>
-        <item>93.0</item>
-        <item>93.0</item>
-        <item>93.0</item>
-        <item>94.6</item>
-        <item>94.6</item>
-        <item>95.7</item>
-        <item>95.7</item>
-        <item>95.7</item>
-        <item>95.7</item>
-        <item>97.2</item>
-        <item>97.2</item>
-        <item>98.4</item>
-        <item>101.2</item>
-        <item>102.2</item>
-        <item>103.8</item>
-        <item>106.3</item>
-        <item>107.7</item>
-        <item>110.2</item>
-        <item>111.6</item>
-        <item>114.0</item>
-        <item>115.2</item>
-        <item>116.5</item>
-        <item>120.4</item>
-        <item>121.1</item>
-        <item>122.6</item>
-        <item>125.3</item>
-        <item>126.5</item>
-        <item>128.7</item>
-        <item>129.6</item>
-        <item>132.1</item>
-        <item>134.0</item>
-        <item>156.3</item>
-        <item>174.4</item>
-        <item>193.5</item>
-        <item>223.4</item>
-        <item>252.0</item>
-        <item>290.1</item>
-        <item>315.4</item>
-        <item>332.4</item>
-        <item>404.2</item>
-        <item>433.1</item>
-        <item>446.1</item>
-        <item>460.9</item>
-        <item>474.8</item>
-        <item>488.7</item>
-        <item>500.0</item>
-        <item>500.0</item>
-        <item>512.5</item>
-        <item>525.0</item>
-        <item>537.5</item>
-        <item>550.0</item>
-        <item>562.5</item>
-        <item>575.0</item>
-        <item>587.5</item>
-        <item>600.0</item>
-        <item>610.0</item>
-        <item>620.0</item>
-        <item>630.0</item>
-        <item>640.0</item>
-        <item>650.0</item>
-        <item>660.0</item>
-        <item>670.0</item>
-        <item>680.0</item>
-        <item>690.0</item>
-        <item>700.0</item>
-        <item>705.0</item>
-        <item>710.0</item>
-        <item>715.0</item>
-        <item>720.0</item>
-        <item>725.0</item>
-        <item>730.0</item>
-        <item>735.0</item>
-        <item>740.0</item>
-        <item>745.0</item>
-        <item>750.0</item>
-        <item>755.0</item>
-        <item>760.0</item>
-        <item>765.0</item>
-        <item>770.0</item>
-        <item>775.0</item>
-        <item>800.0</item>
-        <item>816.7</item>
-        <item>833.3</item>
-        <item>850.0</item>
-        <item>866.7</item>
-        <item>883.3</item>
-        <item>900.0</item>
-        <item>914.3</item>
-        <item>928.6</item>
-        <item>942.9</item>
-        <item>957.1</item>
-        <item>971.4</item>
-        <item>985.7</item>
-        <item>1000.0</item>
-    </array>
-
-    <!-- An array describing the screen's backlight values corresponding to the brightness
-         values in the config_screenBrightnessNits array.
-
-         This array should be equal in size to config_screenBrightnessBacklight. -->
-    <integer-array name="config_screenBrightnessBacklight">
-        <item>1</item>
-        <item>255</item>
-    </integer-array>
-
-    <!-- An array of floats describing the screen brightness in nits corresponding to the backlight
-         values in the config_screenBrightnessBacklight array.  On OLED displays these  values
-         should be measured with an all white image while the display is in the fully on state.
-         Note that this value should *not* reflect the maximum brightness value for any high
-         brightness modes but only the maximum brightness value obtainable in a sustainable manner.
-
-         This array should be equal in size to config_screenBrightnessBacklight -->
-    <array name="config_screenBrightnessNits">
-        <item>2.0</item>
-        <item>850.0</item>
-    </array>
-
-    <!-- Array of ambient lux threshold values. This is used for determining hysteresis constraint
-         values by calculating the index to use for lookup and then setting the constraint value
-         to the corresponding value of the array. The new brightening hysteresis constraint value
-         is the n-th element of config_ambientBrighteningThresholds, and the new darkening
-         hysteresis constraint value is the n-th element of config_ambientDarkeningThresholds.
-
-         The (zero-based) index is calculated as follows: (MAX is the largest index of the array)
-         condition                       calculated index
-         value < level[0]                0
-         level[n] <= value < level[n+1]  n+1
-         level[MAX] <= value             MAX+1 -->
-    <integer-array name="config_ambientThresholdLevels">
-        <item>2</item>
-        <item>10</item>
-        <item>30</item>
-        <item>100</item>
-        <item>800</item>
-        <item>2000</item>
-        <item>4000</item>
-    </integer-array>
-
-    <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
-         percent. The length of this array is assumed to be one greater than
-         config_ambientThresholdLevels. The brightening threshold is calculated as
-         lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
-         the screen brightness is recalculated. See the config_ambientThresholdLevels
-         description for how the constraint value is chosen. -->
-    <integer-array name="config_ambientBrighteningThresholds">
-        <item>2</item>
-        <item>6</item>
-        <item>10</item>
-        <item>30</item>
-        <item>100</item>
-        <item>400</item>
-        <item>600</item>
-        <item>1000</item>
-    </integer-array>
-
-    <!-- Array of hysteresis constraint values for darkening, represented as tenths of a
-         percent. The length of this array is assumed to be one greater than
-         config_ambientThresholdLevels. The darkening threshold is calculated as
-         lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
-         the screen brightness is recalculated. See the config_ambientThresholdLevels
-         description for how the constraint value is chosen. -->
-    <integer-array name="config_ambientDarkeningThresholds">
-        <item>800</item>
-        <item>800</item>
-        <item>500</item>
-        <item>500</item>
-        <item>500</item>
-        <item>500</item>
-        <item>500</item>
-        <item>500</item>
-    </integer-array>
-
     <!-- Doze: should the TYPE_PICK_UP_GESTURE sensor be used as a pulse signal. -->
     <bool name="config_dozePulsePickup">true</bool>