122 lines
3.5 KiB
Plaintext
122 lines
3.5 KiB
Plaintext
#include "anorak-idp.dtsi"
|
|
#include <dt-bindings/interconnect/qcom,anorak.h>
|
|
|
|
&wlan {
|
|
status = "disabled";
|
|
};
|
|
|
|
&bluetooth {
|
|
status = "disabled";
|
|
};
|
|
|
|
&soc {
|
|
|
|
wlan_kiwi: qcom,cnss-kiwi@b0000000 {
|
|
compatible = "qcom,cnss-kiwi";
|
|
reg = <0xb0000000 0x10000>;
|
|
reg-names = "smmu_iova_ipa";
|
|
wlan-en-gpio = <&tlmm 120 0>;
|
|
|
|
pinctrl-names = "wlan_en_active", "wlan_en_sleep";
|
|
pinctrl-0 = <&cnss_wlan_en_active>;
|
|
pinctrl-1 = <&cnss_wlan_en_sleep>;
|
|
qcom,wlan;
|
|
qcom,wlan-rc-num = <0>;
|
|
qcom,wlan-ramdump-dynamic = <0x780000>;
|
|
qcom,wlan-cbc-enabled;
|
|
use-pm-domain;
|
|
qcom,same-dt-multi-dev;
|
|
mboxes = <&qmp_aop 0>;
|
|
|
|
vdd-wlan-dig-supply = <&S3B>;
|
|
qcom,vdd-wlan-dig-config = <950000 1120000 0 0 1>;
|
|
vdd-wlan-io-supply = <&L7B>;
|
|
qcom,vdd-wlan-io-config = <1800000 1800000 0 0 1>;
|
|
vdd-wlan-rfa1-supply = <&S1B>;
|
|
qcom,vdd-wlan-rfa1-config = <1880000 2040000 0 0 1>;
|
|
vdd-wlan-rfa2-supply = <&S2B>;
|
|
qcom,vdd-wlan-rfa2-config = <1350000 1370000 0 0 1>;
|
|
vdd-wlan-supply = <&S4F>;
|
|
qcom,vdd-wlan-config = <952000 952000 0 0 1>;
|
|
|
|
interconnects =
|
|
<&pcie_noc MASTER_PCIE_0 &pcie_noc SLAVE_ANOC_PCIE_GEM_NOC>,
|
|
<&gem_noc MASTER_ANOC_PCIE_GEM_NOC &mc_virt SLAVE_EBI1>;
|
|
interconnect-names = "pcie_to_memnoc", "memnoc_to_ddr";
|
|
|
|
qcom,icc-path-count = <2>;
|
|
qcom,bus-bw-cfg-count = <9>;
|
|
qcom,bus-bw-cfg =
|
|
/** ICC Path 1 **/
|
|
<0 0>, /* no vote */
|
|
/* idle: 0-18 Mbps snoc/anoc: 150 Mhz */
|
|
<2250 1599540>,
|
|
/* low: 18-60 Mbps snoc/anoc: 150 Mhz */
|
|
<7500 1599540>,
|
|
/* medium: 60-240 Mbps snoc/anoc: 150 Mhz*/
|
|
<30000 1599540>,
|
|
/* high: 240-1200 Mbps snoc/anoc: 240 Mhz */
|
|
<100000 3199610>,
|
|
/* very high: > 1200 Mbps snoc/anoc: 403 Mhz */
|
|
<175000 6447980>,
|
|
/* ultra high: DBS mode snoc/anoc: 403 Mhz */
|
|
<175000 6447980>,
|
|
/* super high: DBS mode snoc/anoc: 403 Mhz */
|
|
<175000 6447980>,
|
|
/* low (latency critical): 18-60 Mbps snoc/anoc: 240 Mhz */
|
|
<7500 3199610>,
|
|
|
|
/** ICC Path 2 **/
|
|
<0 0>,
|
|
/* ddr: 451.2 MHz */
|
|
<2250 2749600>,
|
|
/* ddr: 451.2 MHz */
|
|
<7500 2749600>,
|
|
/* ddr: 451.2 MHz */
|
|
<30000 2749600>,
|
|
/* ddr: 451.2 MHz */
|
|
<100000 2749600>,
|
|
/* ddr: 1555 MHz */
|
|
<175000 9479200>,
|
|
/* ddr: 2092 MHz */
|
|
<175000 12756000>,
|
|
/* ddr: 2133 MHz */
|
|
<175000 13106400>,
|
|
/* ddr: 547.2 MHz */
|
|
<7500 3335200>;
|
|
|
|
qcom,pdc_init_table =
|
|
" {class: wlan_pdc, ss: rf, res: s4f.m, enable: 0}",
|
|
" {class: wlan_pdc, ss: rf, res: s4f.e, enable: 0}",
|
|
" {class: wlan_pdc, ss: bb, res: s4f.v, upval: 940}",
|
|
" {class: wlan_pdc, ss: bb, res: s4f.v, dwnval: 420}",
|
|
" {class: wlan_pdc, ss: bb, res: pdc, enable: 1}";
|
|
};
|
|
|
|
bt_hmt: bt_kiwi {
|
|
compatible = "qcom,kiwi";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_en_sleep>;
|
|
qcom,wl-reset-gpio = <&tlmm 120 0>; /* WL_CTRL */
|
|
qcom,bt-reset-gpio = <&tlmm 122 0>; /* BT_EN */
|
|
qcom,bt-sw-ctrl-gpio = <&tlmm 146 0>; /* SW_CTRL */
|
|
|
|
qcom,bt-vdd-io-supply = <&L7B>; /* BT VDD1.8 AON */
|
|
qcom,bt-vdd-aon-supply = <&S3B>; /* BT AON LDO*/
|
|
qcom,bt-vdd-rfacmn-supply = <&S3B>;
|
|
qcom,bt-vdd-dig-supply = <&S3B>; /* BT LDO*/
|
|
qcom,bt-vdd-rfa-0p8-supply = <&S3B>; /* BT RFA0p8 CMN LDO*/
|
|
qcom,bt-vdd-rfa1-supply = <&S1B>; /* BT RFA1.8 LDO */
|
|
qcom,bt-vdd-rfa2-supply = <&S2B>; /* BT RFA1.2 LDO */
|
|
|
|
qcom,bt-vdd-io-config = <1800000 1800000 0 1>;
|
|
qcom,bt-vdd-aon-config = <950000 950000 0 1>;
|
|
qcom,bt-vdd-rfacmn-config = <950000 950000 0 1>;
|
|
qcom,bt-vdd-dig-config = <950000 950000 0 1>;
|
|
qcom,bt-vdd-rfa-0p8-config = <950000 950000 0 1>;
|
|
qcom,bt-vdd-rfa1-config = <1900000 1900000 0 1>;
|
|
qcom,bt-vdd-rfa2-config = <1350000 1350000 0 1>;
|
|
};
|
|
|
|
};
|