xiaomi-unicorn2/android_kernel_xiaomi_sm8450-devicetrees
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
lineage-21
android_kernel_xiaomi_sm845…/qcom/lahaina-pmic-overlay.dtsi
Fenglin Wu 0ac2ac1053 ARM: dts: msm: add PBS device for PM8350B haptics ISC config 
Add PBS device for triggering PBS to configure haptics ISC config
during LRA impedance detection sequence.

Change-Id: Ibf17b5081c0ddd2fc4ab5778e2c7aa62e8be57f4
2020-09-01 14:48:39 +08:00

566 lines
12 KiB
Plaintext
Raw Permalink Blame History

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include "pmk8350.dtsi"
#include "pm8350.dtsi"
#include "pm8350c.dtsi"
#include "pm8350b.dtsi"
#include "pmr735a.dtsi"
#include "pmr735b.dtsi"
&pm8350_gpios {
key_vol_up {
key_vol_up_default: key_vol_up_default {
pins = "gpio6";
function = "normal";
input-enable;
bias-pull-up;
power-source = <1>;
};
};
usb2_vbus_boost {
usb2_vbus_boost_default: usb2_vbus_boost_default {
pins = "gpio8";
function = "normal";
output-low;
power-source = <0>; /* 1.8V input supply */
};
};
usb2_vbus_det {
usb2_vbus_det_default: usb2_vbus_det_default {
pins = "gpio9";
function = "normal";
input-enable;
bias-disable;
power-source = <0>; /* 1.8V input supply */
};
};
};
&pm8350c_gpios {
lcd_backlight_ctrl {
lcd_backlight_ctrl_default: lcd_backlight_ctrl_default {
pins = "gpio9";
function = "func1";
input-disable;
output-enable;
bias-disable;
power-source = <1>; /* 1.8V */
qcom,drive-strength = <2>;
};
};
};
&qupv3_se13_i2c {
#address-cells = <1>;
#size-cells = <0>;
status = "ok";
pm8008i@8 {
compatible = "qcom,i2c-pmic";
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pm8008i_active>;
pm8008-chip@900 {
compatible = "qcom,pm8008-chip";
reg = <0x900>;
PM8008I_EN: qcom,pm8008-chip-en {
regulator-name = "pm8008i-chip-en";
};
};
qcom,revid@100 {
compatible = "qcom,qpnp-revid";
reg = <0x100>;
};
};
pm8008i@9 {
compatible = "qcom,i2c-pmic";
reg = <0x9>;
#address-cells = <1>;
#size-cells = <0>;
qcom,pm8008i-regulator {
compatible = "qcom,pm8008-regulator";
#address-cells = <1>;
#size-cells = <0>;
pm8008_en-supply = <&PM8008I_EN>;
vdd_l1_l2-supply = <&S12B>;
vdd_l3_l4-supply = <&BOB>;
vdd_l5-supply = <&S1C>;
vdd_l6-supply = <&BOB>;
vdd_l7-supply = <&BOB>;
L1I: pm8008i_l1: regulator@4000 {
reg = <0x4000>;
regulator-name = "pm8008i_l1";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1104000>;
qcom,min-dropout-voltage = <224000>;
qcom,hpm-min-load = <30000>;
};
L2I: pm8008i_l2: regulator@4100 {
reg = <0x4100>;
regulator-name = "pm8008i_l2";
regulator-min-microvolt = <944000>;
regulator-max-microvolt = <1152000>;
qcom,min-dropout-voltage = <150000>;
qcom,hpm-min-load = <30000>;
};
L3I: pm8008i_l3: regulator@4200 {
reg = <0x4200>;
regulator-name = "pm8008i_l3";
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3000000>;
qcom,min-dropout-voltage = <200000>;
};
L4I: pm8008i_l4: regulator@4300 {
reg = <0x4300>;
regulator-name = "pm8008i_l4";
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <2904000>;
qcom,min-dropout-voltage = <200000>;
};
L5I: pm8008i_l5: regulator@4400 {
reg = <0x4400>;
regulator-name = "pm8008i_l5";
regulator-min-microvolt = <1696000>;
regulator-max-microvolt = <1800000>;
qcom,min-dropout-voltage = <70000>;
};
L6I: pm8008i_l6: regulator@4500 {
reg = <0x4500>;
regulator-name = "pm8008i_l6";
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <2904000>;
qcom,min-dropout-voltage = <200000>;
};
L7I: pm8008i_l7: regulator@4600 {
reg = <0x4600>;
regulator-name = "pm8008i_l7";
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <3000000>;
qcom,min-dropout-voltage = <200000>;
};
};
};
pm8008j@c {
compatible = "qcom,i2c-pmic";
reg = <0xc>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pm8008j_active>;
pm8008-chip@900 {
compatible = "qcom,pm8008-chip";
reg = <0x900>;
PM8008J_EN: qcom,pm8008-chip-en {
regulator-name = "pm8008j-chip-en";
};
};
qcom,revid@100 {
compatible = "qcom,qpnp-revid";
reg = <0x100>;
};
};
pm8008j@d {
compatible = "qcom,i2c-pmic";
reg = <0xd>;
#address-cells = <1>;
#size-cells = <0>;
qcom,pm8008j-regulator {
compatible = "qcom,pm8008-regulator";
#address-cells = <1>;
#size-cells = <0>;
pm8008_en-supply = <&PM8008J_EN>;
vdd_l1_l2-supply = <&S12B>;
vdd_l3_l4-supply = <&S1C>;
vdd_l5-supply = <&BOB>;
vdd_l6-supply = <&BOB>;
vdd_l7-supply = <&BOB>;
L1J: pm8008j_l1: regulator@4000 {
reg = <0x4000>;
regulator-name = "pm8008j_l1";
regulator-min-microvolt = <944000>;
regulator-max-microvolt = <1152000>;
qcom,min-dropout-voltage = <100000>;
qcom,hpm-min-load = <30000>;
};
L2J: pm8008j_l2: regulator@4100 {
reg = <0x4100>;
regulator-name = "pm8008j_l2";
regulator-min-microvolt = <944000>;
regulator-max-microvolt = <1056000>;
qcom,min-dropout-voltage = <225000>;
qcom,hpm-min-load = <30000>;
};
L3J: pm8008j_l3: regulator@4200 {
reg = <0x4200>;
regulator-name = "pm8008j_l3";
regulator-min-microvolt = <1728000>;
regulator-max-microvolt = <1800000>;
qcom,min-dropout-voltage = <70000>;
};
L4J: pm8008j_l4: regulator@4300 {
reg = <0x4300>;
regulator-name = "pm8008j_l4";
regulator-min-microvolt = <1728000>;
regulator-max-microvolt = <1800000>;
qcom,min-dropout-voltage = <70000>;
};
L5J: pm8008j_l5: regulator@4400 {
reg = <0x4400>;
regulator-name = "pm8008j_l5";
regulator-min-microvolt = <2696000>;
regulator-max-microvolt = <2904000>;
qcom,min-dropout-voltage = <200000>;
};
L6J: pm8008j_l6: regulator@4500 {
reg = <0x4500>;
regulator-name = "pm8008j_l6";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
qcom,min-dropout-voltage = <200000>;
};
L7J: pm8008j_l7: regulator@4600 {
reg = <0x4600>;
regulator-name = "pm8008j_l7";
regulator-min-microvolt = <2808000>;
regulator-max-microvolt = <3600000>;
qcom,min-dropout-voltage = <200000>;
};
};
};
};
&pm8350_gpios {
pm8350_rear_tof_therm {
pm8350_rear_tof_therm_default: pm8350_rear_tof_therm_default {
pins = "gpio1";
bias-high-impedance;
};
};
};
&pmk8350_vadc {
pinctrl-names = "default";
pinctrl-0 = <&pm8350_rear_tof_therm_default>;
pm8350_msm_therm {
reg = <PM8350_ADC7_AMUX_THM1_100K_PU>;
label = "pm8350_msm_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350_cam_flash_therm {
reg = <PM8350_ADC7_AMUX_THM2_100K_PU>;
label = "pm8350_cam_flash_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350_hot_pocket_therm {
reg = <PM8350_ADC7_AMUX_THM3_100K_PU>;
label = "pm8350_hot_pocket_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350_wide_rfc_therm {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
label = "pm8350_wide_rfc_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350_rear_tof_therm {
reg = <PM8350_ADC7_AMUX_THM5_100K_PU>;
label = "pm8350_rear_tof_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350b_usb_conn_therm {
reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
label = "pm8350b_usb_conn_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
pm8350b_wl_chg_therm {
reg = <PM8350B_ADC7_GPIO2_100K_PU>;
label = "pm8350b_wl_chg_therm";
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm8350_tz {
io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP>;
io-channel-names = "thermal";
};
&pm8350b_tz {
io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>;
io-channel-names = "thermal";
};
&pmk8350_sdam_2 {
hap_cl_brake: cl_brake@7c {
reg = <0x7c 0x1>;
bits = <0 8>;
};
};
&pm8350b_haptics {
nvmem-cell-names = "hap_cl_brake";
nvmem-cells = <&hap_cl_brake>;
nvmem-names = "hap_cfg_sdam";
nvmem = <&pmk8350_sdam_46>;
qcom,pbs-client = <&pm8350b_pbs2>;
};
&pmr735a_tz {
io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>;
io-channel-names = "thermal";
};
&pmr735b_tz {
io-channels = <&pmk8350_vadc PMR735B_ADC7_DIE_TEMP>;
io-channel-names = "thermal";
};
&pmk8350_adc_tm {
io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU>,
<&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU>,
<&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU>,
<&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU>,
<&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU>,
<&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>,
<&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>,
<&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
pm8350_msm_therm {
reg = <PM8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350_cam_flash_therm {
reg = <PM8350_ADC7_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350_hot_pocket_therm {
reg = <PM8350_ADC7_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350_wide_rfc_therm {
reg = <PM8350_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350_rear_tof_therm {
reg = <PM8350_ADC7_AMUX_THM5_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350b_usb_conn_therm {
reg = <PM8350B_ADC7_AMUX_THM4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pm8350b_wl_chg_therm {
reg = <PM8350B_ADC7_GPIO2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
pmk8350_xo_therm {
reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
};
};
&thermal_zones {
skin-msm-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
camera-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM2_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
hot-pock-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM3_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
rear-cam-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM4_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
tof-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350_ADC7_AMUX_THM5_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
conn-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350B_ADC7_AMUX_THM4_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
wlc-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PM8350B_ADC7_GPIO2_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
xo-therm-usr {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-governor = "user_space";
thermal-sensors = <&pmk8350_adc_tm PMK8350_ADC7_AMUX_THM1_100K_PU>;
wake-capable-sensor;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "passive";
};
};
};
};
&soc {
reboot_reason {
compatible = "qcom,reboot-reason";
nvmem-cells = <&restart_reason>;
nvmem-cell-names = "restart_reason";
};
};
&soc {
pmic-pon-log {
compatible = "qcom,pmic-pon-log";
nvmem = <&pmk8350_sdam_5>;
nvmem-names = "pon_log";
};
};
Reference in New Issue View Git Blame Copy Permalink