tryCell configuration would not be force disabled UpstreamMonitor stop.
If tethering stop with using mobile upstream and swap with SIM fron no
dun to dun supported, dun request would be filed even tethering is not
active.
Bug: 173068192
Test: atest TetheringTests
Original-Change: https://android-review.googlesource.com/1715791
Merged-In: I5505655f52da9fdca2fd43a58e043a9ab727741d
Change-Id: I5505655f52da9fdca2fd43a58e043a9ab727741d
Adding the configuration to decide using rndis or ncm for usb tethering.
If ncm is configured for TETHEIRNG_USB, then TETHERING_NCM is not
available.
Bug: 162920185
Test: atest TetheringTests
manul testing usb tethering
Original-Change: https://android-review.googlesource.com/1730541
Merged-In: Ifc7eee2457a950a0e2d1c3cc89a3373a7ad23c9c
Change-Id: Ifc7eee2457a950a0e2d1c3cc89a3373a7ad23c9c
The stable connectivity shims are updated to now contain S API, so
tethering tests that assumed that compatibility R behavior was used need
to be updated.
To avoid such failures Tethering tests should have a test target using
updated shims (TetheringNextTests), but this was not done in S
timeframe.
Ignore-AOSP-First: topic needs differences in AOSP
Bug: 189581241
Test: atest TetheringTests
Change-Id: Ibc04e64a1e9d82b67aff10d1a6d77f9e6b1bbdfb
startTrackDefaultNetwork was allowed to called multiple times
before even though there is no one actually do it. However,
in the TetheringTest#verifyDefaultNetworkRequestFiled, a
manual invocation is used to ensure that function supports
multiple entrance.
But with aosp/1697371, startTrackDefaultNetwork is no longer
allowed to be called multiple times, it would lead to log.wtf
and crash system in eng build.
Since the manual invocation of startTrackDefaultNetwork is not
realistic and no longer valid anymore, remove the invocation
that caused the trouble.
Test: atest TetheringCoverageTests
Bug: 188613493
Merged-In: I61f6088783d521fd17ae1e87370842b4239fbe75
Change-Id: I61f6088783d521fd17ae1e87370842b4239fbe75
(cherry-picked from aosp/1711433)
The change aosp/1708088 break tethering unit test in R.
Bug: 187946226
Test: atest TetheringTests in R and S
Change-Id: I4eb4b757f6d7cd3458964c81310dcf0687a4f091
Merged-In: I4eb4b757f6d7cd3458964c81310dcf0687a4f091
Before this change, tethering always report a list of tethered
interfaces and the caller need to use each tethering type's interface
regex to matching tethered list to manual implement the mapping of
tethering type and interface. This change allow caller to get rid of
tethering interface regex.
Bug: 162920185
Bug: 152203943
Test: atest CtsTetheringTest on S
Ignore-AOSP-First: Currently aosp would automerge to mainlne-prod, merge
to sc-dev first to avoid adding new API to mainline-prod
CTS-Coverage-Bug: I already add cts test(ag/14622456), but Lint
still complaint because my cts is under packages/modules/Connectivity/
but it only check whether CL touching platform/cts
Change-Id: I91bcccd676d109c1b974497ac29bd366a41b8899
This is supported by:
1. Utilize the new API from both NetworkStatsProvider
and IOffloadControl to send data warning quota to hardware.
And pass the warning reached notification back to NPMS.
2. Disable software solution introduced in R release for
V1.1+ hardware, since now we can fully offload data warning
and limit notification to hardware.
Test: atest TetheringTests
Fix: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: Ie49461694d77ab7f25a549433b01b5b0167bd489
This is a no-op change that just adapt new API from
NetworkStatsProvider to get warning and limit bytes at the same
time. This change also stores them locally for subsequent
patches to set warning bytes to hardware.
Test: Will be included in the subsequent patch.
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: Iec01cb01fd1ce481ce0bd736762baddde1e38084
This is a no-op change that redirect both V1.0 and V1.1 callback
events to the same handling function. Since the V1.1 callback
is extended from V1.0 callback, we can safely use V1.1
callback for both V1.0 and V1.1 control.
The change also provides interface for subsequent
OffloadController changes to set warning and limit at the
same time.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I6505a04de8c57357dd1fa9ce898c13395e497816
While the actual part that track default request is inside
UpstreamNetworkMonitor, instead of passing it from Tethering,
move it into counter-part CL and use it from
UpstreamNetworkMonitor.
Since the current code is replaced by registerSystemDefaultCallback
in Android S, implement it inside the api30 shim implementation
to provide an unified interface to tethering.
Test: atest TetheringCoverageTests
Bug: 185952829
Change-Id: Iaf21b6b662aa6aba79c2b75379128b8523f81f02
Create *LatestSdk variant build target which have target sdk specify
to allow test apk install to released platform.
Bug: 182211575
Test: test S MtsTetheringTest in R device
Change-Id: I4d5c5e8c3d74993a67380e0211da31884cbf8792
This is no longer necessary as all the methods that take it are
running on on the handler thread, either in Tethering itself or
on the state machine thread in IpServer, which runs on the same
thread as Tethering.
Specifically:
- interfaceStatusChanged, interfaceAdded, interfaceRemoved,
interfaceLinkStateChanged: run from mNetdCallback, which always
posts them to mHandler.
- setWifiTethering: only called by enableTetheringInternal, which
is called by the following:
- startTethering, stopTethering: via lambda posted to mHandler
- IpServerCallback#requestEnableTethering: called by IpServer
while processing a command.
- setEthernetTethering: only called by enableTetheringInternal.
- EthernetCallback: runs on mExecutor, which posts to mHandler.
- getLastTetherError: only used by the test. Renamed to
getLastErrorForTest to ensure no other callers.
- sendTetherStateChangedBroadcast: called only by
notifyInterfaceStateChange, which is called only by
- IpServerCallback#updateInterfaceState, which is called only
by sendInterfaceState, which is called by various IpServer
state enter methods.
- notifyLinkPropertiesChanged: called only by
IpServerCallback#updateLinkProperties, which is only called by
IpServer#sendLinkProperties, which is only called by:
- Code that processes CMD_IPV6_TETHER_UPDATE
- IpServer#handleNewPrefixRequest: only called when processing
CMD_NEW_PREFIX_REQUEST.
- IpServer#sendInterfaceState (see above)
- handleWifiApAction, handleWifiP2pAction: only called by
mStateReceiver, which runs on the handler thread
- tether(String, int): called by:
- tether(String, IIntResultListener): posted to mHandler
- changeInterfaceState: called by:
- EthernetCallback (see above)
- enableWifiIpServingLocked: called by handleWifiApAction and
handleWifiP2pAction (see above)
- tetherMatchingInterfaces: only called by handleUsbAction,
which is run from mStateReceiver on the handler thread.
- untether(String): called by:
- untether(String, IIntResultListener): posted to mHandler
- changeInterfaceState (see above)
- setUsbTethering: called by:
- setUsbTethering(boolean, IIntResultListener): posted to mHandler
- enableTetheringInternal (see above)
- setNcmTethering: called by enableTetheringInternal (see above)
- getTetheredIfaces: called only by TetheringTest. Renamed to
getTetheredIfacesForTest to ensure no other callers.
- getErroredIfaces: unused, deleted in this CL
- getTetheredIfaces: called by:
- isTetheringActive: called by onUserRestrictionsChanged, which
is only called by mStateReceiver
- TetheringTest
- dump(): changed to run on handler thread
- upstreamWanted: called by
- TetherModeAliveState#enter
- TetherModeAliveState#updateUpstreamWanted, which is called
only by TetherModeAliveState#processMessage.
Test: atest TetheringCoverageTests
Test: enabled/disabled hotspot, USB tethering
Change-Id: Id49d33f027b8df4c97fda480ff239c0ba90bb96a
This is necessary change for minimize the code size when
repeatedly restarting OffloadController in subsequent
patches.
Test: atest TetheringTests
Bug: 149467454
Merged-In: I0b02d01cd8749d81c9d020dee7fdb4f80e18ae98
Change-Id: I0b02d01cd8749d81c9d020dee7fdb4f80e18ae98
(cherry-picked from ag/14234078)
Some OEM may have special mobile data icon show up when non-default
(e.g. DUN) mobile connection connected even wifi is also connected.
So always connected DUN may let user hard to distinguish tethering
upstream in those OEM's devices. Also release unused mobile connection
may safe power.
This CL removes unnecessary code from selectPreferredUpstreamType.
In particular:
- When a DUN or HIPRI upstream is selected, calling
registerMobileNetworkRequest is unnecessary. A mobile
NetworkRequest is always registered unless a non-mobile upstream
is selected.
- When a non-mobile upstream is found, releasing the mobile
NetworkRequest is unnecessary in selectPreferredUpstreamType
because it will be done by chooseUpstreamType immediately after
selectPreferredUpstreamType returns.
- When no upstream is found and cellular upstream is not permitted,
it is not necessary to release the mobile NetworkRequest. When
cellular is not permitted, no such NetworkRequest will be filed
because registerMobileNetworkRequest checks with EntitlementManager
before actually requesting the network. If cellular becomes the
upstream and then later becomes not permitted because of an
entitlement failure, all tethering will be stopped by Settings.
Note: currently legacy upstream selection has two known bugs:
1. If mobile has higher priority than non-mobile network, mobile request
should never be released and always prefer use mobile. But in practice,
mobile request would be released when tethering select non-mobile network
as upstream.
2. If mobile has higher priority than wifi network and default network
is wifi but mobile is still connected, tethering would choose mobile as
upstream because it has higher priority. Mobile disconnecting may not
trigger tethering to switch its upstream to wifi because currnetly
tethering rely on CONNECTIVITY_ACTION broadcast to handle upstream
disconnect.
Bug: 173068192
Test: atest TetheringTests
Change-Id: Id5df58af830cc534ecd79041ddf8a04171047e9b
This is a no-op change that try to use 1.1 HAL if available.
Otherwise, fallback to 1.0 HAL. The change also provides version
information for subsequent patches to determine what to do for
specific version.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I6a3ce877cdff2496087b97b191a9bfd5b0792827
This is necessary change for minimize the code size when
repeatedly restarting OffloadController in subsequent
patches.
Test: atest TetheringTests
Bug: 149467454
Ignore-AOSP-First: avoid long automerger delay
Change-Id: I0b02d01cd8749d81c9d020dee7fdb4f80e18ae98
This is useful for OEMs that want to use RNDIS or NCM as a
local-only link that is directly connected to some other host.
This can be used to implement USB tethering using NCM, which
currently only supports local-only mode.
Bug: 175090447
Test: TetheringIntegrationTests:EthernetTetheringTest#testLocalOnlyTethering
Change-Id: I0ffaa46e4640e5b235340a15d25909106ceb0c07
When a 464xlat upstream disconnects, onLinkPropertiesChanged is
called after onLost. This breaks an UpstreamNetworkMonitor
assumption that no callback will ever arrive after onLost.
Bug: 173068192
Fix: 185117377
Test: new unit test
Change-Id: I4ff1eca6d5ed1680ff716c71b683891c8a0e5a77
Current upstream selection code suffers from a race where if the
CONNECTIVITY_ACTION broadcast for a given network switch is
received and processed before the NetworkCallbacks for that
network switch, upstream selection just re-selects the same
upstream it had before. The incorrect upstream persists until
another CONNECTIVITY_ACTION is received.
Fix this by defining a new EVENT_DEFAULT_SWITCHED message code
communicated from UpstreamNetworkMonitor to Tethering, and send
that whenever the default network switches.
The message is sent in onLinkPropertiesChanged, because the
tethering code stores all information about networks in an
UpstreamNetworkState structure that contains Network,
LinkProperties and NetworkCapabilities. When a network switch
occurs, onLinkPropertiesChanged always follows onAvailable and
onCapabilitiesChanged, and thus marks the first point in time
when all the information is available.
This CL tries not to change existing codepaths too much, but
it does move the update of mDefaultInternetNetwork from
onCapabilitiesChanged to onLinkPropertiesChanged. This should
not be a problem because the only thing that reads
mDefaultInternetNetwork is getCurrentPreferredUpstream, which,
in the case of a default network switch, will be run by the
onLinkPropertiesChanged which will immediately follow.
Bug: 173068192
Test: changes to existing unit tests show bug is fixed
Change-Id: Ic9196bc92892811b25bda463ffd839ee5c19d294
In the current tethering code, upstream selection is only
triggered by CONNECTIVITY_ACTION. But in automatic mode, the
upstream network is selected by listening to a NetworkCallback
that tracks the default network.
This causes a race where if the CONNECTIVITY_ACTION for a network
switch is received and processed before the callbacks for that
network switch, upstream selection just re-selects the upstream
currently in use.
Make it possible to test this by giving TestConnectivityManager
the ability to choose the ordering between NetworkCallbacks and
CONNECTIVITY_ACTION, and to run an arbitrary Runnable between
calling one and calling the other. TetheringTest passes a
Runnable that calls mLooper.dispatchAll(), which ensures that
the tethering code fully processes the first set of information
it receives (either the broadcast (or the callbacks) before
receiving any more information.
Add test coverage to testAutomaticUpstreamSelection that
exercises various orderings, and make the test pass by expecting
the buggy behaviour of the current code.
An upcoming CL will fix the bug and update the tests.
Bug: 173068192
Test: test-only change
Change-Id: I7805444dcf59f6d5f8517fbcf2f2b1641783d50b
Add a unit test to verify that BPF coordinator access downstream4
and upstream4 map while the conntrack event was received.
Verify shim API for IPv4:
- tetherOffloadRuleAdd
- tetherOffloadRuleRemove
- tetherOffloadGetAndClearStats
- tetherOffloadSetInterfaceQuota
- isAnyIpv4RuleOnUpstream
Test: atest TetheringCoverageTests
Change-Id: Ia57f07990d8750fd6ff67d7f4a18aa610336024a
Required because XDP offload needs input interface mac address
to be a part of the key. The mac address is used for checking
packets which are received from exceped input interface.
Test: atest TetheringCoverageTests, TetheringPrivilegedTests
Change-Id: Ied159454b516c0d70efe0a85744d1bb606892f2d
Currently, BpfCoordinator only sets the data limit on a given
upstream whenever the first IPv6 rule is created on that
upstream, and clears it whenever the last rule is deleted on that
upstream. It never does this when adding or removing IPv4 rules.
This makes it impossible to offload traffic on IPv4-only
networks.
Fix this by setting the limit when IPv4 rules are created or
deleted as well.
Test: atest TetheringCoverageTests
Manual tests as the follows
Test {add, clear} limit with IPv6-only network [OK]
Test {add} limit with IPv4-only upstream [OK]
TODO:
Test {clear} limit with IPv4-only network. blocked by aosp/1579873
because the IPv4 rules have never deleted.
Change-Id: I5a29bdd18e564318759f617023163e23fb5a3ed0
