I'd changed DetailedState to force ConnectivityService to treat
provisioning apn's specially. In particular so that they wouldn't
be identified they were fully connected until the provisioning
actually started. The problem is that DetailedState is a public enum
that has a CTS test and just changing the CTS to allow for the new
state (CONNECTED_TO_PROVISIONING_NETWORK) was inappropriate.
Instead I've added a new mIsConnectedToProvisioningNetwork variable
and used the DetailedState.SUSPENDED as the intermediate state.
Bug: 10620248
Change-Id: Id4a842398cad67455541ce629959351c27d83639
When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
When the system becomes loaded the PhoneApp can be delayed
significantly and a call to setEnableFailFastMobileData may not
occur because the channel between the MobileDataStateTracker (MDST)
and DcTracker (DCT) is not connected.
Solution: Add a isReady to MDST and isMobileDataStateTrackerReady to
ConnectivityService and call it from isMobileOk.
Bug: 10351868
Change-Id: I92f9d58121b88186b636cd71c2fd2ef9a28f7cf6
Move the early return outside the try {} finally so we don't call
setEnableFailFastMobileData(DctContants.DISABLED). Otherwise
referencing counting is wrong and an exception is thrown in DcTrackerBase.
Bug: 10304904
Change-Id: I5ba5121e473bada9f3daa8d6f3d3577cec8212fc
When captive portal checking completes pass back the result.
This is used to enable/disable failing fast for mobile. When
failing fast is enabled we don't check for data stalls and thus
won't be continually trying to do recovery operations, such as
restarting the radio.
Bug: 9462512
Change-Id: I0dea0eee519f8ee7f94e79d40e82c18f30d7fe2e
After detecting there is a captive portal the url used in the
notification for mobile networks should be updateable via gservices.
These urls will be the same as used by CheckMp and is needed for
carriers that have specific provisioning urls such as AT&T and Verizon.
Bug: 9622647
Change-Id: Idcf4dabc72ece1dbbe1d5e5a21e550dd06fe16c7
I needed to test the result of startUsingNetworkFeature, otherwise
on mobile networks that are slow to come up, we won't detect
warm SIMs after booting.
Bug: 9962943
Change-Id: Ib638a4e43867ecaa85d6abff65643b77a63526b6
When captive portal checking completes pass back the result.
This is used to enable/disable failing fast for mobile. When
failing fast is enabled we don't check for data stalls and thus
won't be continually trying to do recovery operations, such as
restarting the radio.
Bug: 9462512
Change-Id: I0dea0eee519f8ee7f94e79d40e82c18f30d7fe2e
I needed to test the result of startUsingNetworkFeature, otherwise
on mobile networks that are slow to come up, we won't detect
warm SIMs after booting.
Bug: 9962943
Change-Id: Ib638a4e43867ecaa85d6abff65643b77a63526b6
After detecting there is a captive portal the url used in the
notification for mobile networks should be updateable via gservices.
These urls will be the same as used by CheckMp and is needed for
carriers that have specific provisioning urls such as AT&T and Verizon.
Bug: 9622647
Change-Id: Idcf4dabc72ece1dbbe1d5e5a21e550dd06fe16c7
Various applications such as Skype and our legacy VPN code
do not understand routes pointed directly at point-to-point
interfaces and require a default gateway IPv4 address in
order to function.
Grudgingly accept that routes without default gateways Are Hard
and use gatewayed routes instead. This causes routing to go from:
default dev clat4 scope link
to:
default via 192.0.0.4 dev clat4 scope link
192.0.0.4 dev clat4 scope link
and those apps now work.
Bug: 9597256
Bug: 9597516
Change-Id: I7b7890873802d3cb99affd6eb70b8ab75e7a2cf6
It used to be set at boot, but that was too quick to pick up carrier
specific resources. With this change even if you switch sims subequent
checks get the new values.
bug:9865616
Change-Id: I8c270c6b02fc6bdd3c3d76ceea58172df25e058d
A simple mechanism for doing this is to take advantage of the fact
that we require the device to reboot after a sim has been changed.
Thus when connectivity service is started we wait to get a connection
then call checkMobileProvisioning once. We also add a check that
the DEVICE_PROVISIONED is true, i.e. SetupWizard has been run.
Bug: 9784024
Change-Id: I5c1936744f6fc55a447ae44cd36eec3849d27e21
A simple mechanism for doing this is to take advantage of the fact
that we require the device to reboot after a sim has been changed.
Thus when connectivity service is started we wait to get a connection
then call checkMobileProvisioning once. We also add a check that
the DEVICE_PROVISIONED is true, i.e. SetupWizard has been run.
Bug: 9784024
Change-Id: I5c1936744f6fc55a447ae44cd36eec3849d27e21
