After detecting there is a captive portal the url used in the
notification for mobile networks should be updateable via gservices.
These urls will be the same as used by CheckMp and is needed for
carriers that have specific provisioning urls such as AT&T and Verizon.
Bug: 9622647
Change-Id: Idcf4dabc72ece1dbbe1d5e5a21e550dd06fe16c7
I needed to test the result of startUsingNetworkFeature, otherwise
on mobile networks that are slow to come up, we won't detect
warm SIMs after booting.
Bug: 9962943
Change-Id: Ib638a4e43867ecaa85d6abff65643b77a63526b6
It used to be set at boot, but that was too quick to pick up carrier
specific resources. With this change even if you switch sims subequent
checks get the new values.
bug:9865616
Change-Id: I8c270c6b02fc6bdd3c3d76ceea58172df25e058d
A simple mechanism for doing this is to take advantage of the fact
that we require the device to reboot after a sim has been changed.
Thus when connectivity service is started we wait to get a connection
then call checkMobileProvisioning once. We also add a check that
the DEVICE_PROVISIONED is true, i.e. SetupWizard has been run.
Bug: 9784024
Change-Id: I5c1936744f6fc55a447ae44cd36eec3849d27e21
The new one is often null when disconnected, so using the new fails.
In other situations, it's the connections on the old network we want
to reset anyway, so the old code when it would work would also do
the wrong thing (unless new iface == old iface).
bug:9112928
Change-Id: I1fcae89cc3aa9d712e516e7c97cece0b89869bd9
To date WiFi only devices were defined by the list of networkAttributes
in config.xml overriden in on a per-device basis. This change is the
simplest change needed to determine this at runtime and therefore allowing
a single build to support the two different configurations.
Bug: 8562845
Change-Id: I34de5c6accc718b199c13815537de1debfe3dc91
VPN used to just watch the interface, but that is insufficient. There
is no promise that the interface will go down when we're done with it.
Now that wifi stays on in scan-only mode despite user turning it off
it seems that the interface is left up, even in AP mode.
Now listening for ConnectivityService broadcast that the network we were on
has disconnected and tearing down the VPN then or when the interface
goes away.
bug:8550083
Change-Id: Icf414497bc55bead69de04e91f39f90ac2e6578a
Fixes issues brought in by change to isHostRoute. isHostRoute
was technically correct, but the callers really wanted hasNextHop
behavior.
bug:8597268
Change-Id: I360761ccfa98b2ba34642f717a78fa71ec1bae4f
The Global http proxy shouldn't be used by apps, but can be useful in certain
conditions.
bug:8264794
bug:8557674
Change-Id: Ia3cbe542e448d9e74d0492626a13e9fd34ad797a
Change our order of operations so that secondary route table
adds succeed. Working to understand the why of this too.
bug:8361314
Change-Id: Ie25061eb38c62eaa5e60aa8a488496de49bdbd9d
LinkProperties's equals() method was broken by the addition of
stacked interfaces. The reason was that equals() was checking
the equality of mStackedInterfaces.keys(), which is just an
enumeration, instead of mStackedInterfaces.keySet(), which
actually contains the keys. The test was failing, but I didn't
notice.
Fix the bug and make the test check the objects more in depth
so it can give more detailed error messages when equals() fails.
Bug: 8276725
Change-Id: Ie990bd75f641c28e63e54d953dcd0f4de13f7c9f
Normally, clatd is stopped when a connection disconnects.
However, if the connection's LinkProperties change, or if the
disconnect somehow gets lost (e.g., because of bug 8486114),
then we need to stop it (and possibly restart it).
Bug: 8276725
Change-Id: Ib8ad0d653ed8d0cd70b7414bcaa8fdaef8ba5fcc
Allows the external BT stack the means to communicate with
ConnectivityService during reverse tethering.
bug:8445208
Change-Id: Ice7dfb0b50c9481d359aed14a51372878185171c
Currently, isHostRoute returns true iff the gateway address is
the unspecified address (0.0.0.0 or ::). Thus, it will return
true for any route that has no gateway (e.g., a route pointing at
a point-to-point interface), even if the route is not a host
route.
Fix this by checking the prefix length instead. This should be
safe because:
1. mDestination cannot be null, since it's created using new.
2. Host routes created using makeHostRoute (which is what
ConnectivityService calls) always have the correct prefix
lengths (/32 or /128) set.
Bug: 8276725
Change-Id: I14285398823fa6c312349128c7cc216cad4a84c9
1. Add a Nat464Xlat service that ConnectivityService can use
to start and stop clat. When clat is started, the service
waits for the clat interface to come up and then calls
ConnectivityService to add the appropriate routes.
2. Make ConnectivityService start clat when an IPv6-only mobile
interface is connected. We only support clat on mobile for
now.
3. Make tethering use the interface that has the IPv4 default
route insted of using the base interface of the
LinkProperties. This allows us to tether to a stacked
interface, which is needed for tethering with 464xlat.
Bug: 8276725
Change-Id: I24480af69ee280f504399062638af0836a56268e
Currently, ConnectivityService adds and removes routes to/from
the routing table only based on the LinkProperties's routes.
Make it update routes based on the stacked links as well.
Bug: 8276725
Change-Id: I9a2adf537af5a04de0aaab3780afbcc3bb5c6acb
modifyRoute takes both an interface name and a LinkProperties.
This is redundant because all callers get the interface name
from the LinkProperties. Make modifyRoute get the interface
name from the LinkProperties instead.
Change-Id: I41ba8e0a10241c2f1107204fcaca2be74556042b
- Add the interface name.
- Fix a bug where a default route would match an address of
another protocol (e.g., 0.0.0.0/0 would match 2001::).
- Tweak the hashCode method.
- Write a unit test.
Change-Id: Ida8266de440a9b1d9eaa132f182b9f1ce8978c44
