This change updates the getSocket calls to getFileDescriptor, persuant
to new API.
Bug: 72473753
Test: CTS tests run on walleye
Merged-In: I65479cb35c88aee1f65c8597c3382cd30fa8d4a9
Change-Id: I65479cb35c88aee1f65c8597c3382cd30fa8d4a9
(cherry picked from commit 94d33818769cf60b9801b39875f5bc5dff2dc734)
Resetting battery status makes the "disabling battery saver mode"
operation that follows it a no-op if the device is plugged-in to power.
In this case, sticky battery saver status won't get reset and might
affect the tests following it.
Also, change back turnBatteryOff -> "cmd battery reset" since issue "72502904"
is fixed now.
Fixes: 77236363
Test: cts-tradefed run singleCommand cts-dev -m CtsHostsideNetworkTests -t \
com.android.cts.net.HostsideRestrictBackgroundNetworkTests
Change-Id: I93e11c714200e8de6864a3bd7627eb66842a39d1
In some cases, we verify network connection is available to an app while
in foreground. If the app's foreground status is due to top activity, it
will lose the foreground status in case the screen goes off. So, turn
the screen-on while verifying for network connectivity.
Fixes: 71694434
Test: cts-tradefed run singleCommand cts-dev -m CtsHostsideNetworkTests -t \
com.android.cts.net.HostsideRestrictBackgroundNetworkTests
Change-Id: Id1a49cedc2501859f73deead372afb7f6a41baac
This patch adds tests for cases where only auth or crypt are enabled.
These cases are supported, and this patch adds test coverage.
Bug: 75049573
Test: this, run on walleye
Merged-In: I656d9c4a86c13ce4928d6bd68a9e0d48cf805191
Change-Id: I656d9c4a86c13ce4928d6bd68a9e0d48cf805191
(cherry picked from commit 69517633288bac80d31f53720b2837b261926485)
This change adds tests to ensure that SPI expiration timers are set to a
high value, greater than 1 hour (3600s).
Bug: 72316671
Test: Ran this, and MultiNetworkSysCtlTest.
Merged-In: Ib4776322bd5df772a3700b6e7ed1b5e7ed6b4637
Change-Id: Ib4776322bd5df772a3700b6e7ed1b5e7ed6b4637
(cherry picked from commit 45bc61034edee35d4ea5ab1753e15411d4c9d15c)
The availability status change test performs the following:
- Disable RTT
- Verifies broadcast informing of RTT status change arrives (and then
validates disabled)
- Enable RTT
- Verifies broadcast informing of RTT status change arrives (and then
validates enabled)
However: there is no API available to CTS (to apps) to disable RTT in
a robust way:
- No APM control API
- Disabling Wi-Fi is possible but that only disables RTT if scans are
also disabled and there is no API for that and the rest of the tests
requires scans to be on (higher priority tests).
Bug: 74518964
Test: atest CtsNetTestCases:WifiRttTest
Change-Id: Ieaeca065661cebae1921933fad56f82dd6f30c2f
Update the test to use the associated AP as the test AP:
- Make sure associated
- Find associated AP
- Disable Wi-Fi
- Run test
- Enable Wi-Fi
Bug: 74518964
Test: CtsNetTestCases:WifiRttTest pass
Change-Id: I0ee4eb56f32b4b3d119b86442d8e5912a6694fc8
Baseline set of tests for the public Wi-Fi RTT API.
Note: some of these tests require an IEEE 802.11mc capable AP.
Bug: 63446747
Test: tests pass
Change-Id: I176d9adbef15ce1c33b4572d5eb7e6cdf672f021
Changes in the CL:
a) Separate the scan part of testWifiManagerActions test into a
separate test.
b) The new scan test should check the |WIFI_SCAN_AVAILABLE| broadcast to
determine if the scan is expected to pass or not.
Bug: 72863107
Test: `atest
android.net.wifi.cts.WifiManagerTest#testWifiManagerActions`
Test: `atest
android.net.wifi.cts.WifiManagerTest#
testWifiManagerScanWhenWifiOffLocationTurnedOn`
Change-Id: I595c73152459ab09ad4061997b02a7165106915c
Aware is now disabled whenever Location Mode is off. Update CTS
to check for Location Mode and fail if not available with relevant
notification.
Bug: 70218191
Test: CTS tests fail with Location Mode off
Test: CTS tests pass (with known failure for MAC randomization) with Location Mode on
Change-Id: I0739012a2a5fce56e76c1607e7b700c12fa8e083
The AccessPrivateDataTest and CreatePrivateDataTest is directly testing
the proc file of xt_qtaguid module. These two test will no longer valid
after we block the access from untrusted app to qtaguid proc file. So
remove the AccessPrivateDataTest and added a new qtaguid test to make
sure apps with SDK 28 or above cannot access qtaguid proc file.
Bug: 30950746
Bug: 68774956
Test: run cts -m CtsAppSecurityHostTestCases \
-t android.appsecurity.cts.AppSecurityTests
Change-Id: I957ba31fea392982e7d15eda2afd9580299192f2
Test: I solemnly swear I tested this conflict resolution.
Merged-In: I5afdfc8e1e523768db9065dd3571cb31bc1dfac5
Change-Id: I5c5b85f516dba0d403eeee06055953931d2198aa
This change sets LOCAL_SDK_VERSION for all packages where
this is possible without breaking the build, and
LOCAL_PRIVATE_PLATFORM_APIS := true otherwise.
Setting one of these two will be made required soon, and this
is a change in preparation for that. Not setting LOCAL_SDK_VERSION
makes the app implicitly depend on the bootclasspath, which is
often not required. This change effectively makes depending on
private apis opt-in rather than opt-out.
Test: make relevant packages
Bug: 73535841
Change-Id: I687153389dd4bfab1c83df5d9af83d89bed76fd4
Merged-In: I5afdfc8e1e523768db9065dd3571cb31bc1dfac5
This change sets LOCAL_SDK_VERSION for all packages where
this is possible without breaking the build, and
LOCAL_PRIVATE_PLATFORM_APIS := true otherwise.
Setting one of these two will be made required soon, and this
is a change in preparation for that. Not setting LOCAL_SDK_VERSION
makes the app implicitly depend on the bootclasspath, which is
often not required. This change effectively makes depending on
private apis opt-in rather than opt-out.
Test: make relevant packages
Bug: 73535841
Change-Id: I5afdfc8e1e523768db9065dd3571cb31bc1dfac5
Aware API which permitted a Responder (Publisher) to accept data
path requests from ANY peer (as opposed to a specific peer with a
Peer ID or MAC address) is deprecated in the API update.
The CTS tests in any case cannot test the full exchange (which
requires 2 devices and is tested using CtsVerifier). They tested
the creation of a valid Network Specifier and a network request
which then times-out. However, the network request did not specify
a peer - a now deprecated API.
Update the tests:
- For OOB data-path specify a dummy MAC address
- Remove the in-band data-path tests since there is no public API
to create a dummy PeerHandle.
Bug: 72175022
Test: CTS passes
Change-Id: I97b74d80d0f9dfdc43c4c743a18c960c05ab6a53
