1. Detect and account the number of secure RGB layers present.
2. Mark secure RGB layers for MDP comp in cache based stratergy.
3. If full MDP comp and partial MDP comp fails, Mark secure RGB
layers for MDP composition.
4. In partial MDP comp reject load based composition, if secure
layer is present to avoid GPU composition.
5. Disable idlefallback feature if secure RGB layer is present
to avoid GPU composition.
Change-Id: Idb4c4f09b081ec20240a2602aa3f20332fa49ad6
Remove support for overriding a layer's z to set it up for foreground.
This is unused and can be achieved using pipes staged at required
z-orders.
Change-Id: Ia4688beed770c44c20d201a2dc5687252e002981
External only feature is completely handled in surfaceflinger, remove
unwanted code churn related to external only feature from display HAL.
Change-Id: If4f4f3fa8e91a5b8387e426b9e190abd2b06d793
* A non-updating layer requiring rotation, can make use of
the older rotator buffer written when the layer got first
updated, rather than invoking a new rotator cycle.
* A rotator play is avoided in cases where incoming layer
buffer fd, offset, whf, src-rect, dst-rect, etc are similar
to that of the previous input layer to the rotator.
* For ex: In a usecase where video layer updates happen at
30fps and all other asynchrous UI updates happen at 60fps,
instead of the traditional 60 calls of rotator play per sec,
we now do only 30 thereby saving rotator bandwidth.
* Property "debug.rotcache.disable" can be used to disable
this feature.
Change-Id: I1d1c352c63007b7e0b4fee40882086ccd2f5a4aa
Add support for rotator downscale. This is enabled from 8994 onwards
Constraints:
--Downscale should be a power of 2, max upto 32
--Both directions should have equal downscale
--{src_w, src_h} mod downscale = 0
--No BWC
--No Interlaced video support
The rotator's destination rect is modified to reflect the presence of
downscale. Any downscale calcs should be done only after adjusting
crop to meet rotator's requirements.
Smaller downscale is used if we need to chop off any more than 1
line or pixel.
Change-Id: Id07d62fefa3213035f16cca49497800716484a95
* Limit the number of rotator sessions to 4 both in
LayerRotMap and RotMgr structures
* Make use of MDPVersion getter fuctions to check
for maxMixerWidth and maxDownScale supported by MDP
Change-Id: I27dac877807fbb4ed6fcb3500a3a318a2ef5d8b2
1. For PTOR layers, MDP needs to be configured with width, height
and format of the Copybit render buffer, otherwise it will lead to
artifacts due to incorrect render buffer reads, when PTOR layer
handles have un-equal strides.
2. Remove render buffer offset for a PTOR layer and configure MDP
with modified source crop, based on its position on render buffer.
3. A layer cannot qualify for PTOR feature, if none of below layers
intersect with it.
Change-Id: Idba65789b9ed3b699a5c70107881868c0385322d
Avoid MDP composition while system running in thermal burst mode
by reading node msm_fb_thermal_level which is being updated by
thermal daemon.
Change-Id: I3a1a85f1af35b787310ac205dbed3bb2ae86deb7
* This reverts commit 52b4fdbdbd.
* Since DisplayDevices are not created for non-wfd virtual
displays(CTS/SR/SSD) anymore, we can remove these checks.
Change-Id: I9249a70c6d6f6b42f268e6ec8a28c0a86b954c4e
Provides a way to enable/disable logs at runtime via binder.
The logs need to be enabled from a priviliged shell.
For example,
$ adb shell service call display.qservice 15 i32 0 i32 1
Here 15 is the integer code for DYNAMIC_DEBUG in IQService.h
The first parameter 0 is for DEBUG_ALL
The second parameter 1 is to enable.
Hence, this command enables all debug logs.
Another example - this command enables vsync logging
$ adb shell service call display.qservice 15 i32 2 i32 1
Change-Id: I13d5f397d9d03f0ac6a14d3a3c9098ed59fc62fd
Currently for Mdss rotator we manipulate the layer buffer dimensions
to be equal to what rotator's destination dimensions would be, so that
these could be fed to MDP. Instead, this patch introduces APIs in
rotator so that hwc can directly query destination crop, width, height,
format from rotator.
This also simplifies the updateSource() and configRotator() helpers.
Change-Id: I501d998f2e0574683c764af9422742b2426ba0c7
- Consider two smallest layers for PTOR feature which uses MDP comp.
- These two layers are rendered on a buffer and are queued to MDP
to acheive full MDP Composition
- This helps to acheive performance enhancement
Change-Id: I43d9306ff19cd2d7a410c885316523965a44cbd4
1. Use MDP rotator to rotate RGB layers which are rendered by software
2. Restrict total number of rotator sessions to 4 for all displays
3. Disable RGB layer rotation for all MDP versions < MDP5
Change-Id: Ie93111082dff9a16b614e9768df5d8ce83ff9e25
Define binder interface setViewFrame to set view frame information
of a display by surfaceflinger when projection for that display
changes.
Change-Id: If737b51ae0f04303a1a29c91a9703f64354b61fb
1. Add hook to dump the layers going to VDS based virtual display.
2. Furthermore, add utility function to dump the frame buffer and
WB output buffer. This will be enabled via a system property
debug.hwc.enable_vds_dump
Once dumping is enabled, the dumps can be extracted from
/data/vds.fb.FORMAT.XRESxYRES.raw
/data/vds.wb.FORMAT.XRESxYRES.raw
e.g. vds.fb.MDP_RGBA_8888.1152x1920.raw
Change-Id: I2435c5507961a52929411206892c005492d5c193
MDP bandwidth limitations can be avoided, if the overlapping region
covered by the smallest layer at a higher z-order, can be composed
on a render buffer using Copybit, and then it can be queued to MDP
along with other layers. It helps to improve performace by avoiding
GPU Composition in use cases like Home Screen pan. To enable this
feature, set system prop "persist.hwc.ptor.enable" to "true" or '1'
and enable Copybit HAL compilation.
Change-Id: Ib719d3dd42477837519518cc427f1b95356c28f7
If the display list contains single layer and that layer
has same properties as Frame Buffer, avoid BLIT on Frame buffer
and pass it directly to display.
Change-Id: I24decaca4788432a55b550caa2a1354a670cd6fa
DirtyRect for a layer is generated w.r.t to its buffer
coordinates. It needs to be mapped for layer destination
(display) coordinates before using it to calculate the frame's
ROI.
Change-Id: Id86f495b2016da2cfd5aed4d86bff6d3035abf10
Extends partial frame update support for split displays by calculating
changing region(ROI) independently for each half of the screen. In case of
only one half updating, display driver shuts down the DSI/MDP mixer control
of the non updating half.
Maintains two ROI's for each display. In case of Non-split
displays, only left ROI is updated.
Change-Id: I8a67fe40aac665a48b6f8a46beffb9f8027851b2
Use change in HWC_GEOMETRY_CHANGED flag appropriately to avoid
redundant and unintentional overwrites of DisplayFrame values,
which may result fall back to GPU.
Change-Id: Ifb0f8dc5d356c965b6e80644f32392c460fb1ae7
We brings all swap rect level checks in HAL from surfaceflinger
for MDP3.
swap rect kicks in case of
1 Only one layer is updating.
2 No overlaypping layers.
3.Both src and dst has same value.(no scaling)
4.No video layer
Change-Id: I881958994e80b53d4969beaaf51518b727a8de78
* Provide a binder interface call for wfd module
to inform display about the start/stop/pause/resume
of wfd session.
* This is needed for wfd-hdmi synchronization in
case of v4l2 wfd solution. If hdmi is plugged
in during v4l2 wfd session, display-hal waits in
uevent thread for wfd teardown notification from
wfd module, before going ahead with configuring
external display.
* For VDS WFD solution, display-hal waits in uevent
thread for wfd-teardown to be signalled from
the composition thread.
Change-Id: I9514cb5bc7ff81de0b5dd4cdf66d8286a64ba094
1. Set the GPU hint flag to high for MIXED/GPU composition only for
first frame after MDP to GPU/MIXED mode transition.
2. Set the GPU hint to default if the current composition type is GPU
due to idle fallback or MDP composition.
Change-Id: I208a778017435a5a4620142da9d9fb3c50e09155
Move aspect ratio helper function to qdutils so it can be used
as a utility function in libvirtual and libexternal without
introducing a circular dependency.
Change-Id: Ib295c1d9f78bc8898b1aac9a443cdacf53150551
Add support to turn the MDP downscale feature ON through the
use of a system property. 'sys.hwc.mdp_downscale_enabled' shall be
set to 'true' in build.prop file to enable this functionality.
This is required for OEMs that might have privacy concerns over panel
size information being exposed.
Change-Id: I354b25b1fdabe5786aed7552f2afccda35412467
1. Screenrecord and WFD use virtual display and encoder.
Since HAL supports only one virtual display, we need a
definite way to distinguish both use-cases.
Failure to differentiate will break Screen record + WFD
concurrent usecase.
WFD stack will set this usage flag and SF will query the usage
flags to differentiate WFD and screenrecord usecase.
2. Deprecate GRALLOC_USAGE_PRIVATE_EXTERNAL_CC and
GRALLOC_USAGE_PRIVATE_EXTERNAL_BLOCK flags as these are no
longer used.
Change-Id: Ifa260c5af2371eea830744ce62a5a83b8cfd0de7
Derive viewframe rectangle for external display from primary
resolution and primary device orientation.
Change-Id: I1885b660cd6343e41e4b574e358fd063cd47a54d
* In some use-cases, it is possible that there are
no AppBuffer layers on the external/virtual layer-list
during which all the pipes will be allocated to the
primary. When layers do comeup on external/virtual
layer-list, subsequent overlay sets fail.
* This change ensures that in such cases, we invoke a
padding round on all the displays to free up the
hw resources which can be used in subsequent cycles.
Change-Id: Ifac0b8f51a8719eb55b11010d05b8d11352db054
Vpuclient is the client side for VFM in hwc. It follows the
similar pattern of prepare and draw. It has 2 step prepare
including: setVpuSession and prepare. The setVpuSession function
passes all the layers from the SF list to VFM, which marks
the layers that it can support. After this, the layer
allocation/configuration is done, and finally in prepare the
allocated pipes are passed down to VFM. The draw function
passes the handle to the VFM to draw the video layer.
Change-Id: I5d8795de35ed98716f7fa4cd48506b488cb3cb5d
